Phone: 888 275 5772 281 516 9292 eFax: 866 234 0451 Free Shipping on orders over $150
Bresle ChlorideTest Kit

Bresle ChlorideTest Kit

Description
Price: $495.00
Supplied with 100 Bresle Patches, Conductivity Meter, Calibration Solution, 3 × 5ml Syringes, 25ml Beaker, 500ml Distilled Water and Industrial Foam-Filled Carrying Case.
The Bresle Chloride Test is one of the most popular tests for extracting and measuring the salt contamination on blast-cleaned substrates.
This Chloride Test on steel or Salt Test on steel using the Bresle Patch or Bresle Sampler method will help to prevent coating failure due to salts such as chlorides and sulphates contaminating the surface prior to the coating application.

This Chloride Test on steel or Salt Test on steel using the Bresle Patch or Bresle Sampler method will help to prevent coating failure due to salts such as chlorides and sulphates contaminating the surface prior to the coating application. This contamination can be tested quickly and simply using the Bresle Test.

The Bresle Test is one of the most popular tests for extracting and measuring the salt contamination on blast-cleaned substrates.

Easy to use, pour 10mls of distilled water into the beaker and determine the conductivity using the Conductivity Meter. Take a Bresle Patch and apply to the test surface. Fill the syringe with 2.5mls of test water and insert through the adhesive foam into the test chamber. Inject the contents, then extract back into the syringe. Repeat ten cycles of injecting and extracting, then transfer the test water back into the beaker. Measure the test water with the Conductivity Meter and deduct the initial conductivity reading from the result. Multiply the readings by 0.4 to give the quantity of salts in µg/cm² also known as ppm, or by 4 for the quantity of salts µg/m².

The maximum permissible surface density of salts on the steel surface prior to surface treatment depends on the type of paint to be applied and what the finished material or product is to be used for. Surface treatment specifications must, therefore, state the highest permissible surface density of salts for each particular application.

Complies with International Standards: ISO 8502-6 and ISO 8502-9.

Additional packs of Bresle Patches (Bresle Samplers) can be purchased to carry out further tests using this kit.

Supplied with 50 Bresle Patches (Standard Adhesion), 50 Bresle Patches Plus (High Adhesion), Conductivity Meter, Calibration Solution, 3 × 5ml Syringes, 25ml Beaker, 500ml Distilled Water and Industrial Foam-Filled Carrying Case.

line
Complies with International Standards
line

  • ISO 8502-6
  • ISO 8502-9

line
Specifications - Part No P2005
line

Patches Supplied 50 Standard & 50 High Adhesion
Conductivity Meter Range 0-199µS/cm - 0.20-1.99S/cm
Bresle Patch Conform Cert 1µS/cm - 0.01mS/cm 
Conductivity Meter Accuracy ±2%


line
Specifications - Part No P2001
line

Patches Supplied Bresle Patches (Pack of 50)
Conductivity Meter Range NPC04


line
Buy Now
line


Check the items you would like to purchase then click "Add To Cart"
Item Price
$495.00
$59.00
$69.00
Accessories PRICE
$59.00