Force and Torque Measurement

Price: 1,595.00

---

Range: 0 - 60 mils (1500 µm)

---

Price: $ 1,425.00

---

Closure Torque Sensor / Bottle Cap Testing

---

Capacities from 10 ozFin to 100 lbFin (7 to 1150 Ncm)

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 1,325.25

---

Mark-10 CAP-TT01 Cap Torque Tester With Data Output / Cap Torque Testers Series TT01

---

6 Ranges up to 250 lb-in / 28 N-m

---

Made in the USA

---

Price: $ 1,450.00

---

Mark-10 Series MTT03C Hand-Held Cap Torque Tester with Data Output

---

3 Ranges up to 100 lbf-in

---

Made in the USA

---

Price: $1,135.25

---

USB, RS-232 Mitutoyo, analog, set point outputs

---

Break detection

---

Price: $1,195.00

---

The Mark-10 AC1036 calibration kit is designed to permit the field calibration of any CAP-TT01 Cap Torque Tester.

---

Manufacturer: Mark-10

---

Warranty: One Year

---

CAP-HT has been replaced by the new and improved CAP-TT03

---

3 Ranges up to 100 lbf-in / 1150 Kg-mm / 1150 N-cm

---

Units of measure: lbf-in, kgf-cm, and N-cm (selectable)

---

Measures in "Continuous" or "Peak" mode

---

MGT has been replaced by the Series-TT03

---

MGT Digital Torque Gauge

---

Digital Torque Gauge

---

6 Ranges up to 100lbf-in

---

Units of measure: lbf-in, kgf-cm, and N-cm (selectable)

---

Price: $ 7,400.00

---

Motorized Cap Torque Tester

---

3 ranges up to 85.0 lbf-in

---

1,000 Data memory for computer download

---

Digital speed control 3°~90° per second in 0.1 degree increments

---

Price: $1,275.00

---

Shimpo TNP Cap Torque Tester / Meter

---

Memory for 1000 values with USB Output

---

3 Ranges up to 90 Lb-in

---

Selectable units of measure: lbf-in, kgf-cm, N-m and N-cm

---

Includes Hi/Go/Lo Limits and LED Indicators

---

Price:Call for Price

---

Precise and rugged benchtop instrument to measure actual and peak torque

---

Manufacturer: Alluris

---

Warranty: One Year

---

Torque measurment with 0.5% accuracy, memory and USB interface

---

Manufacturer: Alluris

---

Warranty: One Year

---

Price: $ 1,650.00

---

Shimpo FTS-X Force Test System with USB Data Output

---

Available in 5 Ranges up to 110 lbs.

---

Includes Gauge and Test Stand

---

Price: $3,445.00

---

Shimpo FTS-HD High Capacity Force Test System

---

1000 lb / 500 Kg / 5000 N Capacity

---

Includes Gauge and Test Stand (FGV-1000HXY + FGS-1000H)

---

Price: $ 394.25 to $ 536.75

---

Mark-10 Series 2 Economical Digital Force Gauge

---

Measures Push and Pull Force

---

±0.5% accuracy

---

3 Year Warranty

---

Price: $617.50 to $760.00

---

Mark-10 Series-3 Digital Force Gauge

---

2,000 Hz peak sampling rate

---

±0.3% accuracy

---

3 Year Warranty

---

Price: $ 802.75 to $ 945.25

---

Mark-10 Series 4 Advanced Digital Force Gauge

---

3,000 Hz peak sampling rate

---

±0.2% accuracy

---

50 point data memory and statistics

---

3 Year Warranty

---

Price: $ 1,040.25 up to $ 1,420.25

---

Mark-10 Series 5 Advanced Digital Force Gage, Mitutoyo, and analog outputs

---

7,000 Hz peak sampling rate

---

±0.1% accuracy

---

1,000 point data memory and statistics

---

Reversible display

---

Price: $ 1,515.25 to $ 1,657.75

---

Mark-10 Series 7 Professional Digital Force Gauge with USB Output & Software

---

14,000 Hz peak sampling rate

---

Continuous data capture with 5,000-data point buffer and bulk output

---

±0.1% accuracy

---

Price: $ 945.25

---

Mark-10 Series E Ergonomics Digital Force Gauge with USB Output for ergonomics analysis

---

3 Capacities up to 500 lbF

---

7,000 Hz peak sampling rate

---

±0.2% accuracy

---

Price: $ 1,325.25 up to $ 1,800.25

---

Mark-10 Series E Ergonomics Force Gauges Kit EKE

---

Measure real time and peak push and pull forces

---

Click-LockTM accessory mounting technology

---

USB data output

---

Price: $565.25

---

Mark-10 Series 3I Force and Torque Indicator Torque Display

---

2,000 Hz sampling rate

---

±0.2% accuracy

---

USB output

---

Price: $850.25

---

Mark-10 Series 5I Advanced Force / Torque Indicator with USB Output & Software

---

7,000 Hz sampling rate

---

±0.1% accuracy

---

1,000 point data memory and statistics

---

USB, RS-232, Mitutoyo, and analog outputs

---

Price: $1,372.75

---

Mark-10 Series 7i Professional Force / Torque Indicator

---

14,000 Hz sampling rate

---

Continuous/single data point capture for 5,000 readings, with statistics

---

Footswitch command string

---

Break detection and auto output/zero

---

Price: $ 90.00

---

Mark-10 11-1022 Hi / Lo limits indicator

---

Indicates pass or fail condition during a test

---

Compatible with force gauges and torque gauges with set point outputs

---

Price: $ 75.00

---

Mark-10 AC1003 Double Handle Grip for 2/3 Force Gauges

---

Warranty: One Year

---

Price: $ 185.25

---

Mark-10 AC1029 Axial Compensator for Series STJ or MGT Torque Sensor

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 15.00 up tp $ 85.00

---

Prevent Grip Rotation

---

Quick grip installation and removal

---

Mount to common load cells, test frames, and force gauges

---

Individual adapters and kits available

---

Price: $ 85.00 up to $ 120.00

---

Mark-10 Single Handle and Double Handle Grips

---

Warranty: One Year

---

Price: $ 230.00

---

Mark-10 G1001 Wire Terminal Grip

---

Pull testing of wire and tube terminals, crimps, and other slender samples

---

200 lb capacity

---

Price: $ 180.00

---

Mark-10 G1002 Dual Roller Cam Grip

---

Pull testing of wires, tubes, and other slender samples

---

200 lb capacity

---

Price: $ 140.00

---

Mark-10 G1003 Miniature Component Grip Capacity 30 lb

---

For a variety of pull-off tests

---

30 lb capacity

---

Price: $ 250.00 up to $ 350.00

---

Mark-10 G1008 / G1015 Film & Paper Grips

---

Tensile testing of film, paper, and other thin materials

---

100 lb capacity

---

Price: $ 250.00

---

Small Pin Grip measures samples from 0-.126in / 3.2mm

---

For gripping small diameter wires, pins, filaments etc

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 40.00 up to $ 100.00

---

Mark-10 G1009 Compression Plates

---

Ideal for testing springs, foams and other materials

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 100.00

---

Mark-10 G1010 Jacobs Chuck Pin Vise

---

Secures a fixture or sample during tensile testing

---

30 lb capacity

---

Price: $ 720.00

---

Discounts available if purchasing with an Imada Force Test System of a force gauge and test stand; please call for a quote.

---

Imada Button Puller

---

Capacity 30lbs

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $ 570.00

---

Discounts available if purchasing an Imada Force Test System of a force gauge and test stand; please call for a quote.

---

Imada CH-5000N Wire Terminal Grip

---

Capacity 5000N (1100 lbf, 500kgf)

---

Warranty: One Year

---

Price: $ 550.00

---

Discounts available if purchasing an Imada Force Test System of a force gauge and test stand; please call for a quote.

---

Imada CH-500N Wire Terminal Grip

---

Capacity 110 lbs (500 N, 50 kgf)

---

Warranty: One Year

---

Price: $ 1,950.00

---

Imada CW-5000N Wire Fixture Table

---

Capacity 1100 lbs (5000 N, 500 kgf)

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $ 300.00

---

Imada WG-100 Vise Chuck

---

Screw tightened vise is ideal for slip-free attachment to base of test stand.

---

Note: the WG-100 replaced the GT-30 Vise Chuck

---

Price: $ 790.00

---

Imada CW-500N Wire Wedge Grip

---

Capacity 110 lbs (500 N, 50 kgf)

---

Warranty: One Year

---

Price: $ 145.00 up to $ 245.00

---

Imada DB-1X - DB-2X Data Input Button

---

Send data to a PC spread sheet with the touch of a button

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $ 290.00

---

Imada DF-60 Hook for Corrugated Cardboard Seal Strength

---

Capacity 50lbs (250 N, 25 kgf)

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $290.00 to $390.00

---

Imada FC Thin Film Grip

---

Use these spring loaded film grips to check tensile strength of thin film samples up to 2 mm thickness.

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $850.00 to $1,350.00

---

Imada GT-30-1 90° Peel Test Fixture

---

Maintains constant 90° angle during pull test

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $ 370.00

---

Imada FP Fine Point Grip 11 lb Capacity

---

Grip for small wire, components in narrow spaces.

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $ 299.00

---

Imada LP-99 Lexan Safety Shield

---

Allows access to the control panel

---

Manufacturer: Checkline

---

Warranty: One Year

---

Price: $ 90.00

---

Mark-10 11-1022 Hi / Lo limits indicator

---

Indicates pass or fail condition during a test

---

Compatible with force gauges and torque gauges with set point outputs

---

Price: $ 75.00

---

Mark-10 AC1003 Double Handle Grip for 2/3 Force Gauges

---

Warranty: One Year

---

Price: $ 185.25

---

Mark-10 AC1029 Axial Compensator for Series STJ or MGT Torque Sensor

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 15.00 up tp $ 85.00

---

Prevent Grip Rotation

---

Quick grip installation and removal

---

Mount to common load cells, test frames, and force gauges

---

Individual adapters and kits available

---

Price: $ 85.00 up to $ 120.00

---

Mark-10 Single Handle and Double Handle Grips

---

Warranty: One Year

---

Price: $ 230.00

---

Mark-10 G1001 Wire Terminal Grip

---

Pull testing of wire and tube terminals, crimps, and other slender samples

---

200 lb capacity

---

Price: $ 180.00

---

Mark-10 G1002 Dual Roller Cam Grip

---

Pull testing of wires, tubes, and other slender samples

---

200 lb capacity

---

Price: $ 140.00

---

Mark-10 G1003 Miniature Component Grip Capacity 30 lb

---

For a variety of pull-off tests

---

30 lb capacity

---

Price: $ 250.00 up to $ 350.00

---

Mark-10 G1008 / G1015 Film & Paper Grips

---

Tensile testing of film, paper, and other thin materials

---

100 lb capacity

---

Price: $ 250.00

---

Small Pin Grip measures samples from 0-.126in / 3.2mm

---

For gripping small diameter wires, pins, filaments etc

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 40.00 up to $ 100.00

---

Mark-10 G1009 Compression Plates

---

Ideal for testing springs, foams and other materials

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 100.00

---

Mark-10 G1010 Jacobs Chuck Pin Vise

---

Secures a fixture or sample during tensile testing

---

30 lb capacity

---

Price: $ 95.00 up to $ 125.00

---

Shimpo FG-CLV Clevis Grip

---

Odd shaped parts, punched samples or tension springs are easily secured and tested. Concave shape to pins assures centering under load. Throat clearance with pin is .5" (12.7 mm) and can easily accept samples up to .375" (9.65 mm) wide.

---

Manufacturer: Shimpo

---

Warranty: One Year

---

Price: $ 70.00 up to $ 135.00

---

Shimpo FG-COMP Compression Plates

---

50 and 100MM steel compression plates for top load testing, large sample compression or crush testing, with polished finish. 50mm & 100mm plates available in M6 or M10 threading.

---

Manufacturer: Shimpo

---

Warranty: One Year

---

Price:  $ 375.00

---

Eccentrically mounted, serrated roller grip allow for self tightening of specimens up to 3" (76.20 mm) wide and .25" (6.4 mm) thick.

---

Shimpo FG-FAB Fabric Grip

---

Warranty: One Year

---

Price: $ 150.00

---

Shimpo FG-FLM Film Grip

---

These heavy-duty, spring-loaded grips have serrated jaws for handling samples up to .39" (100 mm) thick and .79"(20 mm) or 1.97" (50 mm) wide.

---

Manufacturer: Shimpo

---

Warranty: One Year

---

Price: $ 122.00

---

Shimpo FG-HANDLE Force Gauge Handle

---

Manufacturer: Shimpo

---

Warranty: One Year

---

Price: $ 325.00

---

Shimpo FG-M10TEN7 Heavy-Duty Tensile Grip

---

Manually tightened jaw faces can accept samples 1.25” (31.75 mm) wide and .25” (6.35 mm) thick. Contact faces are serrated hardened tool steel.

---

Warranty: One Year

---

Price: $ 185.00

---

Shimpo FG-M6CBH60U Carton Box Pull Hook Grip

---

56 lb (25 kg) capacity

---

Price: $ 675.00

---

Shimpo FG-M6FLMQR20U Quick Release Film Grip, 45 lb (20 kg) Max. Capacity

---

0.8" (20 mm) width, 0.08" (2 mm) Max. Opening

---

Price: $ 150.00

---

Perfect for testing fine and medium gauge wire, ribbon, tape and paper. Two jaw widths and load capacities are available; both can handle material thickness up to .04" (1 mm)

---

Shimpo FG-M6FPG Grips Fine & Medium Gauge Wire, Ribbon, Tapes

---

Manufacturer: Shimpo

---

Warranty: One Year

---

Price: $ 220.00 to $ 250.00

---

Each serrated gripping face is .79" (20 mm) square and can accept samples up to .79" (20 mm) thick.

---

Shimpo FG-M6FTG20U Fat Chuck Tensile Grip

---

Warranty: One Year

---

Price: $ 160.00

---

Shimpo FG-M6JAC5U Jacob’s Chuck Grip

---

Designed for testing low gauge wire and rigid rods; accepts material diameters from .02" (.05 mm) to .20" (5 mm).

---

Warranty: One Year

---

Price: $ 120.00 up to $ 130.00

---

Ideal for gripping fine wires and filaments; three ranges for checking samples of .02", .04", .08" (0.5, 1 and 2 mm) thick.

---

Shimpo FG-M6PIN Grips Fine Wires and Filaments

---

Manufacturer: Shimpo

---

Warranty: One Year

---

Price: $ 915.00

---

The FI-5Dillon FI-521 LED Load Cell Indicator21 is a bi-directional load cell instrument accepting both positive and negative load cell signals, internally performing the analog to digital conversion at 80 times per second

---

Price: $ 1,420.25

---

Mark-10 MR06-200 Wire Crimp Pull Sensor Tester Hand-Operated Pull Tester

---

200 lbF / 1000 N capacity

---

Accommodates a wide range of wire diameters, up to 0.25 in. (6.4 mm) / 20 - 3 AWG.

---

Price: $ 565.25 up to $ 802.75

---

Mark-10 Series R01 S-Beam Tension & Compression Force Sensor

---

8 Ranges up to 10,000 lbs

---

Measures tensile and compressive forces

---

Price: $ 707.75 up to $ 802.75

---

Rugged "S-beam" force sensor

---

8 Ranges up to 10,000 lbs

---

Measures tensile and compressive forces

---

Price: $ 617.50 up to $ 736.25

---

Mark-10 R03 Tension and Compression Force Sensor

---

8 Ranges up to 100 lbs

---

Well suited for inline tests

---

Price: $ 945.25

---

Mark-10 Series R04 Miniature S-Beam Force Sensor

---

8 Ranges up to 100 lbs

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 755.25

---

Measures push and pull force

---

500 lbs capacity

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 755.25 up to $ 802.75

---

Universal Torque Sensor

---

Capacities available from 10 ozin to 100 lbin

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 707,75 up to $ 755.25

---

General torque testing

---

Interchangeable attachments

---

Capacities from 10 ozFin to 100 lbFin (7 to 1150 Ncm)

---

Bi-directional

---

Price: $ 760.00 up to $ 807.00

---

Universal Torque Sensor

---

Capacities available from 10 ozin to 100 lbin

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 1,425.00

---

Closure Torque Sensor / Bottle Cap Testing

---

Capacities from 10 ozFin to 100 lbFin (7 to 1150 Ncm)

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 150.00

---

Table Top Stand for BGI

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 1,650.00

---

Shimpo FTS-X Force Test System with USB Data Output

---

Available in 5 Ranges up to 110 lbs.

---

Includes Gauge and Test Stand

---

Price: $3,445.00

---

Shimpo FTS-HD High Capacity Force Test System

---

1000 lb / 500 Kg / 5000 N Capacity

---

Includes Gauge and Test Stand (FGV-1000HXY + FGS-1000H)

---

Price: Please contact us for pricing and availability.

---

Designed for compression and tensile testing of small samples

---

It precisely measures push pull forces as low as 0.0001 lb with an accuracy of ± 0.5% full scale ±1 digit

---

Includes Gauge and Test Stand

---

DISCONTINUED ITEM

---

Force Test System

---

Available in 6 ranges up to 110 lbs

---

Includes Gauge and Test Stand

---

Price: $ 1,200.00 up to $ 4,255.00

---

Mechanical Force Guage with Hardened Ball

---

Available in capacities from 50 lb to 25,000 lb or 50 kg to 10,000 kg

---

±1% accuracy of full range

---

Price: $ 1,207.00 up to $ 2,310.00

---

The Model Dillon U-Force Slim-line Mechanical Force Gauge is an accurate (±1% of full range) mechanical compression measurement instrument. Its slim-line design has repeatedly proven valuable in installations where space is at a premium

---

6 capacities ranging from 25 lb x .25 lb to 5,000 lb x 50 lb and 4 capacities ranging from 10 kg x .1 kg to 500 kg x 5 kg.

---

Price: $ 1,130.00 up to $ 3,800.00

---

Available in capacities from 100 lb to 10,000 lb or 25 kg to 5000 kg

---

Accuracy is ±1%

---

Price: $ 450.00

---

Shimpo Economical Mechanical Force Gauge

---

Accuracy ± 0.2%

---

15 Ranges up to 100 lbs or 50kg

---

Price: $ 1,250.00 up to $ 1,375.00

---

Imada PSH Precision High Capacity Mechanical Force Gauge

---

11 Ranges up 500lbs / 300 Kg / 3000 N

---

Intrinsically Safe for use in hazardous environments

---

Accuracy ± 0.3%

---

Price: $430.00

---

Imada FB Economical Mechanical Force Gauge

---

25 Ranges up 100lbs / 50 Kg / 500 N

---

Intrinsically Safe for use in hazardous environments

---

Price: $ 470.00

---

High Precision Mechanical Force Gauge

---

25 Ranges up 100lbs / 50 Kg / 500 N

---

Intrinsically Safe for use in hazardous environments

---

Price: $ 2,426.00 up to $ 40,464.00

---

Wireless Loadshackle are designed to measure tension / weight in limited headroom applications

---

Capacities up to 880000 lbs / 400 tonnes

---

The ESH has been replaced by the PSH Mechanical Force Gauge

---

High Capacity Mechanical Force Gauge

---

11 Ranges up 500lbs / 300 Kg / 3000 N

---

Intrinsically Safe for use in hazardous environments

---

Price: $ 1,140.00

---

Mark-10 G1045 90° Peel Tester

---

Typical applications include the testing of adhesives, films and packaging, such as foil seals found on yogurt containers, juice containers and others

---

Maintains a 90° angle between the table and the direction of the pull

---

Maximum table travel: 8.2 in (210 mm)

---

Price: $850.00 to $1,350.00

---

Imada GT-30-1 90° Peel Test Fixture

---

Maintains constant 90° angle during pull test

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $ 9,400.00

---

Embossed Carrier Tape Peel Tester

---

180° peel for embossed carrier tape

---

Stroke: 15.74" (400mm)

---

Price: $ 2,870.00

---

Imada P45-50N 45° Peel Tester

---

Peeling strength of a film cover of plastic container. For food and medical care etc.

---

Peeling angle is 45 degree, and this angle is nearly practical condition of opening cover

---

Manufacturer: Imada

---

Price: $ 1,420.25

---

Mark-10 Myometer Kit Series EKM5

---

Includes a Series 5 advanced force gauge, looped strap, hook, tabletop mount, and accessories

---

200 lbF (1,000 N) capacity

---

Price: $ 850.25 up to $ 945.25

---

Advanced test kit with USB output for testing muscle strength, job task analysis, and more

---

Includes a Mark-10 digital force gauge, hand grips, 3 padded attachments, and accessories

---

Available in 200lb and 500 lb capacities

---

3 Year Warranty

---

Price: $ 1,182.75 up to $ 1,277.75

---

Advanced test kit with USB output for testing muscle strength, job task analysis, and more

---

Includes a digital force gauge, hand grips, 3 padded attachments, and accessories

---

Available in 200 lb and 500 lb capacities

---

3 Year Warranty

---

Price: $975.00 to $1,325.00

---

Physical Therapy Kits for testing muscle strength and ergonomic force

---

Ranges from 100 to 500 lbs (50 to 250 kg)

---

Manufacturer: Shimpo

---

Warranty: One Year

---

Price: $ 850.00

---

Physical Therapy Kits for testing muscle strength and ergonomic force

---

100 lb (50 kg) capacity

---

Manufacturer: Shimpo

---

Warranty: Two Year

---

The MK Series has been replaced by the EK3

---

Physical Therapy & Strength Testing Kits

---

For testing muscle strength, job task analysis and more

---

Includes a digital force gauge, hand grips, 3 padded attachments and accessories

---

Available in 200 lb and 500 lb capacities

---

3 Year Warranty

---

Price: $ 795.00

---

Shimpo FGS-100L Manual Hand-lever Force Test Stand

---

Capacity: 200 lb (100 kg)

---

Warranty: One Year

---

Price: $ 495.00

---

Manual Hand Wheel Operated Test Stand

---

250 lb capacity

---

Able to be used in either the vertical or horizontal positions with no added equipment required

---

Price: $ 2,145.00 up to $ 2,395.00

---

Imada LH Horizontal Wire Terminal Pull Tester

---

110 Lb and 220 Lb Capacity

---

Manufacturer: Checkline

---

Warranty: One Year

---

Price: $ 1,300.00 up to $ 1,750.00

---

Vertical Hand Wheel Test Stand

---

Travel: 3mm per wheel rotation

---

220 Lb Capacity

---

Manufacturer: Checkline

---

Price: $ 1,300.00

---

Imada SVL-220 Manual Lever Test Stand

---

Easy to change from tension to compression mode

---

220 Lb Capacity

---

Manufacturer: Checkline

---

Price: $ 1,950.00

---

Safety Shield For ESM303 Test Stand

---

The ESM303-003 safety shield attaches to an ESM303 test stand, providing pinch and sample debris protection for the operator.

---

Price: $470.25

---

Manual Lever Operated Test Stand

---

100lb Capacity

---

9" Maximum Travel

---

Manufacturer: Mark-10

---

Price: $ 565.25

---

Manual Hand Wheel Operated Test Stand

---

100lb Capacity

---

9" Maximum Travel

---

Manufacturer: Mark-10

---

Price: $ 755.25

---

Mark-10 TSB100 Manual Lever Operated Test Stand 100 lb Capacity

---

6" (152 mm) Maximum Travel

---

Manufacturer: Checkline

---

Price: $ 850.25

---

Precision Hand Wheel Test Stand

---

200lb Capacity

---

13" Maximum Travel

---

Manufacturer: Mark-10

---

Price: $ 460.75

---

Manual Test Stand - Compression Only

---

30 lb Capacity

---

1.5" Maximum Travel

---

Manufacturer: Mark-10

---

Price: $ 945.25 .00

---

Manual Lever Operated Test Stand 750lb Capacity

---

6.00" Maximum Travel

---

Manufacturer: Mark-10

---

Price: $ 2,750.25

---

Mark-10 ESM303 High Performance Motorized Test Stand

---

Distance Measurement, Break Detection, Load Holding and many other features

---

Made in the USA, 3 Year Warranty

---

Price: $ 3,445.00

---

High Performance Motorized Test Stands With PC Control

---

Selectable speed setting

---

Right and left travel limit switches

---

Price: $ 5,035.00 up to $ 6,460.00

---

ESM1500 Motorized Test Stand with 1500 lbf / 750 Kg Capacity PC control, stop / cycle at force, travel, or limit switch

---

32" of travel

---

Manufacturer: Checkline

---

Price: $ 3,950.00

---

Mark-10 TSFM-DC Advanced High Capacity Motorized Test Stand

---

500lb Capacity

---

Manufacturer: Mark-10

---

Warranty: One Year

---

Price: $ 3,480.00 up to $ 4,250.00

---

High Performance Force Control Motorized Test Stand

---

110 lb Capacity

---

Stroke: 9" (230mm)

---

Price: $ 3,100.00 up to $ 6,880.00.00

---

Imada MX2 High Performance Motorized Test Stand

---

110lb and 550lb Capacity

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $ 2,550.00 up to $ 3,850.00

---

Imada MX2-110 Motorized Test Stand with FORCE CONTROL

---

110lb Capacity

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $ 3,750.00 up to $ 4,459.00

---

Imada MX-275 Motorized Vertical Test Stand

---

275lb Capacity

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $ 3,750.00 up to $ 4,720.00

---

Imada MH-275 Motorized Horizontal Test Stand

---

275lb Capacity

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $ 8,950.00

---

Imada MX-1100 Motorized Vertical Test Stand

---

1100lb Capacity

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $ 4,300.00 up to $ 4,700.00

---

Imada MH-500 Motorized Horizontal Test Stand

---

500lb Capacity

---

Manufacturer: Imada

---

Warranty: One Year

---

Price: $ 2,775.00

---

Shimpo FGS-100E Motorized Force Test Stand

---

110 lbs capacity

---

Manufacturer: Shimpo

---

Warranty: One Year

---

Price: $ 995.00 up to $ 3,595.00

---

AWS TT-CA Torque Arms, Calibration Arms, Torque Wheels for calibration of torque testers and transducers

---

Supplied with NIST Traceable Calibration Certificate

---

For calibration and verification of torque measuring equipment

---