Imada

Imada CAP-DTXS Cap Torque Testers

• 3 Ranges up to 85 lb-in
• Selectable real time and peak modes

Imada SBK-492 Calibration Fixture for DTX2 Cap Torque Tester

• Imada SBK-492 Calibration Fixture for DTX2 Cap Torque Tester
• Manufacturer: Imada
• Warranty: One Year

Imada DSV Vector Force Gauge

• Vector Force Gauge with Output
• Built-in tilt sensor with audible alert
• Accuracy ± 0.2%
• Measure force in lbs, Kgs or N
• 7 Ranges up to 220 lbs

Imada DST Digital Force Gauge

• Imada DST Digital Force Gauge with Output
• Accuracy ± 0.2%
• Measure force in lbs, Kgs or N
• 7 Ranges up to 220 lbs
• USB and RS-232C outputs

Imada ZTA Series Digital Force Gauge

• 1000lb Capacity Wire Pull Tester
• Supplied with Heavy-Duty Wedge Grips
• Manufacturer: Imada
• Warranty: One Year

Imada ZTA-DPU-Series Digital Force Gauge with Remote Sensor

• Imada ZTA-DPU-Series Digital Force Gauge with Remote Sensor with Output
• Accuracy ± 0.2%
• 11 Ranges up to 4,400 lbs
• Measure force in lbs, Kgs or N

Imada ZTA-LM Series Force Gauge with Button Sensor

• ZT-LM Digital Force Gauge with Remote Button Sensor (compression only)
• Accuracy: ± 0.5% F.S. ±1 LSD
• 11 Ranges up to 4,400 lbf (20.00 kN)
• Measure force in lbs, Kgs or N

Imada E2 Durometer / Hardness Tester

• Imada E2 Durometer - Hardness Tester
• Accuracy ± 1 point
• Lightweight, durable, recyclable, magnesium-alloy case
• Available in Shore A, D, E (ASTM D2240 compliant) and Asker C hardness scales

Imada SY Durometer Stand Lever-Operated Durometer Operating Stand

• Simple lever operation
• Auto Contact enables the durometer to make full, even contact
• Pneumatic damper maintains consistent test speed

Imada YMS Motorized Durometer Test Stand

• OLED display is visible in dark environments
• Simple operation: Press the MEASURE button
• Auto height adjustment

Imada TKD - TKX Digital Durometer with Output

• NIST Traceable Certificate included; ISO-17025 Optional
• USB output
• Modes: Peak, Single/ Dual Timer Hold and Real Time

Imada BP-6 Button Puller

• Imada Button Puller
  
• Capacity 30lbs
• Manufacturer: Imada
• Warranty: One Year

Imada CH-5000N Wire Terminal Grip Capacity 5000N

• Imada CH-5000N Wire Terminal Grip
  
• Capacity 5000N (1100 lbf, 500kgf)
• Warranty: One Year

Imada CH-500N Wire Terminal Grip Capacity 110 lbs

• Imada CH-500N Wire Terminal Grip
• Capacity 110 lbs (500 N, 50 kgf)
• Warranty: One Year

Imada CW-5000N Wire Fixture Table 5000N Capacity

• Imada CW-5000N Wire Fixture Table
• Capacity 1100 lbs (5000 N, 500 kgf)
• Manufacturer: Imada
• Warranty: One Year

Imada WG-100 Vise Chuck

• Discounts available if purchasing an Imada Force Test System of a force gauge and test stand; please call for a quote.
• Imada WG-100 Vise Chuck
  
• The Imada WG-100 Vise is ideal for slip-free attachment to base of test stand.
  
• Note: the WG-100 replaced the GT-30 Vise Chuck

Imada CW-500N Wire Wedge Grip

• Imada CW-500N Wire Wedge Grip
• Capacity 110 lbs (500 N, 50 kgf)
• Warranty: One Year

Imada DB-1X - DB-2X Data Input Button

• Imada DB-1X - DB-2X Data Input Button
  
• Send data to a PC spread sheet with the touch of a button
• Manufacturer: Imada
• Warranty: One Year

Imada DF-60 Hook for Corrugated Cardboard Seal Strength

• Imada DF-60 Hook for Corrugated Cardboard Seal Strength
  
• Capacity 50lbs (250 N, 25 kgf)
• Manufacturer: Imada
• Warranty: One Year

Imada FC Thin Film Grip

• Imada FC Thin Film Grip
• Use these spring loaded film grips to check tensile strength of thin film samples up to 2 mm thickness.
• Manufacturer: Imada
• Warranty: One Year

Imada GT-30-1 90° Peel Test Fixture

• Imada GT-30-1 90° Peel Test Fixture
• Maintains constant 90° angle during pull test
• Manufacturer: Imada
• Warranty: One Year

Imada FP Fine Point Grip

• Imada FP Fine Point Grip 11 lb Capacity
  
• Grip for small wire, components in narrow spaces.
• Manufacturer: Imada
• Warranty: One Year

Imada LP-99 Lexan Safety Shield

• Imada LP-99 Lexan Safety Shield
• Allows access to the control panel
• Manufacturer: Checkline
• Warranty: One Year

Imada BP-6 Button Puller

• Imada Button Puller
  
• Capacity 30lbs
• Manufacturer: Imada
• Warranty: One Year

Imada CH-5000N Wire Terminal Grip Capacity 5000N

• Imada CH-5000N Wire Terminal Grip
  
• Capacity 5000N (1100 lbf, 500kgf)
• Warranty: One Year

Imada CH-500N Wire Terminal Grip Capacity 110 lbs

• Imada CH-500N Wire Terminal Grip
• Capacity 110 lbs (500 N, 50 kgf)
• Warranty: One Year

Imada CW-5000N Wire Fixture Table 5000N Capacity

• Imada CW-5000N Wire Fixture Table
• Capacity 1100 lbs (5000 N, 500 kgf)
• Manufacturer: Imada
• Warranty: One Year

Imada WG-100 Vise Chuck

• Discounts available if purchasing an Imada Force Test System of a force gauge and test stand; please call for a quote.
• Imada WG-100 Vise Chuck
  
• The Imada WG-100 Vise is ideal for slip-free attachment to base of test stand.
  
• Note: the WG-100 replaced the GT-30 Vise Chuck

Imada CW-500N Wire Wedge Grip

• Imada CW-500N Wire Wedge Grip
• Capacity 110 lbs (500 N, 50 kgf)
• Warranty: One Year

Imada DB-1X - DB-2X Data Input Button

• Imada DB-1X - DB-2X Data Input Button
  
• Send data to a PC spread sheet with the touch of a button
• Manufacturer: Imada
• Warranty: One Year

Imada DF-60 Hook for Corrugated Cardboard Seal Strength

• Imada DF-60 Hook for Corrugated Cardboard Seal Strength
  
• Capacity 50lbs (250 N, 25 kgf)
• Manufacturer: Imada
• Warranty: One Year

Imada FC Thin Film Grip

• Imada FC Thin Film Grip
• Use these spring loaded film grips to check tensile strength of thin film samples up to 2 mm thickness.
• Manufacturer: Imada
• Warranty: One Year

Imada GT-30-1 90° Peel Test Fixture

• Imada GT-30-1 90° Peel Test Fixture
• Maintains constant 90° angle during pull test
• Manufacturer: Imada
• Warranty: One Year

Imada FP Fine Point Grip

• Imada FP Fine Point Grip 11 lb Capacity
  
• Grip for small wire, components in narrow spaces.
• Manufacturer: Imada
• Warranty: One Year

Imada LP-99 Lexan Safety Shield

• Imada LP-99 Lexan Safety Shield
• Allows access to the control panel
• Manufacturer: Checkline
• Warranty: One Year

Imada ELM-2000 Digital Surface Speed Meter

Imada PSH High Capacity Mechanical Force Gauge

• Imada PSH Precision High Capacity Mechanical Force Gauge
  
• 11 Ranges up 500lbs / 300 Kg / 3000 N
  
• Intrinsically Safe for use in hazardous environments
• Accuracy ± 0.3%

Imada FB Mechanical Force Gauge

• Imada FB Economical Mechanical Force Gauge
• 25 Ranges up 100lbs / 50 Kg / 500 N
• Intrinsically Safe for use in hazardous environments

Imada PS High Precision Mechanical Force Gauge

• High Precision Mechanical Force Gauge
• 25 Ranges up 100lbs / 50 Kg / 500 N
• Intrinsically Safe for use in hazardous environments

Imada MF Mechanical Force Gauge

• Ergonomic, heavy-duty metal construction
• Intrinsically safe
• Capacity up to 100 lbf

Imada NLH Horizontal Lever Test Stand

• Horizontal Lever Test Stand
• Maximum load 220 lbf (100 kgf)
• Stroke 2?

Imada GT-30-1 90° Peel Test Fixture

• Imada GT-30-1 90° Peel Test Fixture
• Maintains constant 90° angle during pull test
• Manufacturer: Imada
• Warranty: One Year

Imada IPT-200 Embossed Carrier Tape Peel Tester

• Embossed Carrier Tape Peel Tester
• 180° peel for embossed carrier tape
• Stroke: 15.74" (400mm)

Imada P45-50N 45° Peel Tester

• Imada P45-50N 45° Peel Tester
• Peeling strength of a film cover of plastic container. For food and medical care etc.
• Peeling angle is 45 degree, and this angle is nearly practical condition of opening cover
• Manufacturer: Imada

Imada NS-600 LED Stroboscope

• Compact LED Stroboscope
• High efficiency LED solid-state light source - never needs replacement
• Wide measuring range - up to 120,000 fpm

Imada ESL-200 Portable LED Stroboscope, 6.0 - 150,000 fpm / rpm

• Imada ESL-200 Portable LED Stroboscope, 6.0 - 150,000 fpm / rpm
  
• Flash Range: 6.0 - 150,000 fpm/rpm
  
• Made in the USA

Imada SVH-220 Vertical Hand Wheel Test Stand

• Vertical Hand Wheel Test Stand
• Travel: 3mm per wheel rotation
• 220 Lb Capacity
• Manufacturer: Checkline

Imada SVL-220 Manual Lever Test Stand

• Imada SVL-220 Manual Lever Test Stand
• Easy to change from tension to compression mode
• 220 Lb Capacity
• Manufacturer: Checkline

Imada KV-11-S Micro Movement Test Stand

• Imada KV-11-S Micro-Movement Hand Wheel Test Stand with Digital Distance Meter
  
• For compression tests only
  
• Maximum Load 11 lbf (5 kgf)

Imada SH-220 Horizontal Hand Wheel Test Stand

• Imada SH-220 Horizontal Hand Wheel Test Stand
• 2 Ranges Up to: 0-220 lbs / 0-100 Kg / 0-1000N
• Manufacturer: Imada

Imada HV-300 / HV-500 Manual Hand Wheel Test Stand

• High Capacity Manual Hand Wheel Test Stand
• 2 Ranges Up to: 0-500 lbs / 0-250 Kg / 0-2500N
  
• 12" (300mm) Maximum Travel

Imada NLV-220 Vertical Lever Test Stand

• Imada NLV-220 Vertical Lever Test Stand
• 2 Models for testing Tension or Compression
  
• 220 Lb Capacity
• Manufacturer: Imada

Imada HV-110 Hand Wheel Test Stand

• Imada HV-110 Hand Wheel Test Stand - Optional Distance Meter
• 110lb Capacity HV-110 - 220lb Capacity HV-220
• 9" Maximum Travel - 16.5" Clearance (optional)

Imada MH2-110 Horizontal Motorized Test Stand

• High Performance Force Control Motorized Test Stand
• 110 lb Capacity
• Stroke: 9" (230mm)

Imada MX2 High Performance Motorized Test Stand

• Imada MX2 High Performance Motorized Test Stand
• 110lb and 550lb Capacity
• Manufacturer: Imada
• Warranty: One Year

Imada MX-110 Motorized Vertical Test Stand

• Imada MX2-110 Motorized Test Stand with FORCE CONTROL
• 110lb Capacity
• Manufacturer: Imada
• Warranty: One Year

Imada MX-275 Motorized Vertical Test Stand

• Imada MX-275 Motorized Vertical Test Stand
• 275lb Capacity
• Manufacturer: Imada
• Warranty: One Year

Imada MH-275 Motorized Horizontal Test Stand

• Imada MH-275 Motorized Horizontal Test Stand
• 275lb Capacity
• Manufacturer: Imada
• Warranty: One Year

Imada MH-750 Motorized Force Measurement Test Stands

• Imada MH-750 Motorized Force Measurement Test Stands
• Force Gauge sold Separately
• Easy to operate

Imada EMX-275 Ultra Precision, Force Control, Motorized Test Stand

• Imada EMX Ultra Precision, Force Control, Motorized Test Stand
• Force Gauge sold Separately
• Easy-to-use program dial and menu screens control distance, mode, speed, time and cycles

Imada FSA-1KE Material Tester, Integrated Force & Displacement Tester

• High resolution and high speed data output for data collection of up to 2,000 samples per second.
• 
  

Imada FSA-MSL Force - Displacement Tester

• The Imada FSA-MSL Material Tester is designed for force vs distance measurement. It is ideal for tests requiring very small movement, like switch tests.
• 4 Ranges up to 11 lbs / 5 Kg / 50 N Capacity
• 
  

Imada MH-500 Motorized Horizontal Test Stand

• Imada MH-500 Motorized Horizontal Test Stand
• 500lb Capacity
• Manufacturer: Imada
• Warranty: One Year

Imada MV-275 Motorized Vertical Test Stand

• Motorized Test Stand
  
• 275lb Capacity
  

Imada MV-500 - MV-1100 High Capacity Motorized Vertical Test Stands

• High Capacity Motorized Test Stand
  
• 500lb & 1100lb Capacities
  

Imada Cedar DIS-RL Digital Torque Screwdriver

• Imada Cedar DIS-RL Digital Torque Screwdriver
• 3 Ranges up to 90lb-in
  
• Units of measure: lb-in, kg-cm and N-cm (selectable)
  

Imada Cedar DID Digital Torque Screwdriver

• Imada Cedar DID Digital Torque Screwdriver
• 35 lbf-in & 4.5 lbf-in Capacities
• Units of measure: lb-in, oz-in, kg-cm, N-cm and N-m

Imada Cedar NDID-150CN Adjustable Torque Screwdriver

• Selectable units: ozf-in, lbf-in, kgf-cm, N-m and cN-m
• 400 data internal memory for torque data can be recalled and managed
• Accuracy: ±1% F.S. ±1 LSD

Imada SW-1SV-USB Data Acquisition Software for Torque

• Data Acquisition Software for Torque
• Full SPC and graphing capabilities

Imada HTGS Digital Torque Gauge

• Imada HTGS Digital Torque Gauge
• 4 Ranges up to 85.00 lbf-in
• 1,000 data memory for recall or download

Imada GLK Digital Torque Screwdriver

• Imada GLK Digital Torque Screwdriver
• 3 Ranges up to 45 lbf-in
• High accuracy ±1.5% F.S. both CW and CCW directions

Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches

• Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches
• 3 ranges up to 130 lb-in
• Units of measure: lb-in, oz-in, kg-cm, N-cm and N-m (selectable)
• USB Data Output

Imada Cedar DI-1M Digital Torque Tester

• Imada Cedar DI-1M Digital Torque Tester
• Air Tool & Impact Wrench Digital Torque Tester
• 4 Ranges up to 362.0 lb-ft / 50.00 kg-m / 500.0 N-m.
• For calibrating hand screwdrivers, wrenches, and power tools.
• Selectable Units: lb-ft, kg-m and N-m

Imada Cedar DI-4B-25 Digital Torque Tester for Air Tools and Impact Wrenches

• Imada Cedar DI-4B-25 Digital Torque Tester for Air Tools and Impact Wrenches
• Capacity:
  0.1 - 220.0 lbf-in
  0.1 - 250.0 kgf-cm
  0.01 - 25.00 N-m
  
• Selectable Units: lb-ft, kg-m and N-m

Imada DIR-IP Digital Torque Tester

• Digital Torque Tester with Remote Sensor
• 7 Ranges up to 2.0~362.0 lbf-ft / 0.20~50.00 kgf-m / 2.0~500.0 N-m
• 800 data memory for recall or for SPC download

Imada Cedar DWT-200 Digital Torque Tester for Manual Wrenches

• Digital Torque Tester for Manual Torque Wrenches
• Capacity 200 Nm

Imada HTGS Digital Torque Gauge

• Imada HTGS Digital Torque Gauge
• 4 Ranges up to 85.00 lbf-in
• 1,000 data memory for recall or download

Imada Cedar NTS-6 Motorized Rotating Friction Torque Tester

• Imada Cedar NTS-6 Motorized Rotating Friction Torque Tester
• 9 Ranges up to 45.00 lb-in

Cedar DIW Lightweight Digital Torque Tester / Wrench

• Cedar DIW Lightweight Digital Torque Tester / Wrench
• 1/4", 3/8" or 1/2" Drive
• Capacity: up to 87 ft-lbs
• Wrench head swivels 300°

Checkline GEK Adjustable and Ratchet Digital Torque Wrenches

• Checkline GEK Adjustable and Ratchet Digital Torque Wrenches
• High accuracy ±1.5% F.S. both CW and CCW directions
• 9 ranges up to 150 lbf-ft

Imada ACT-220 Automatic Wire Crimp Tester with Load Holding

• Imada ACT-220 Automatic Wire Crimp Tester
• Automatic Wire Crimp Tester with EL electro-luminescent display, measures up to 220 lbf
• ±0.5% Accuracy
• 1,500 Data Memory
• 2 Year Warranty

Imada WTT-HD Heavy Duty Wire Terminal Tester

• Imada WTT-HD Heavy-Duty Wire Terminal Tester Pull Tester
• Range: 0-220 lbs / 0-100 Kg / 0-1000N
• Measures in "Continuous" or "Peak" mode