Tramex Feedback DataLogger Kits

The Feedback DataLogger Kits can help identify humidity issues, saving you from possible floor failures with anhydrite screeds. When it comes to talking about drying screeds and concrete floors in general, there seems to be an elephant in every room: ambient humidity. Although it’s mentioned in every datasheet, handbook and national standard, ambient humidity seems to be overlooked or misunderstood by many architects, builders and flooring installers. As a rule-of-thumb, concrete slabs are expected to dry at a rate of 1mm per day (or an inch per month) and anhydrite screeds the same up to 40mm, or two days per mm when poured deeper (ie a 60mm screed will take: 40mm @ 1 day = 40 days + 20mm @ 2 days = 40 days which = 80 days in total).

  • Tramex FBSK5.1 Feedback Datalogger Starter Kit

    Tramex FBSK5.1 Feedback Datalogger Starter Kit
    Price: $415.00

    Tramex FBSK5.1 Feedback Datalogger Starter Kit
    Bluetooth BLE enabled for use with mobile devices
    With built-in Ambient RH + Temperature sensor; Plug-in RH + Temperature Sensor (optional); Contact Temperature Probe (optional) providing the best available accuracy tolerances of 1.5%RH & 0.1ºF.
  • Tramex FBZK5.1 Feedback Datalogger EZ Kit

    Tramex FBZK5.1 Feedback Datalogger EZ Kit
    Price: $710.00

    Tramex FBZK5.1 Feedback Datalogger EZ Kit
    Ambient Relative Humidity, Temperature, Dew point, Grains per pound
    In Situ Relative Humidity, Temperature, Dew point, Grains per pound (with optional plug-in RH Probe) Contact Temperature, Estimated contact RH, Ambient Dew Point, Contact Delta Temperature (with optional contact Temperature Probe)