DeFelsko PRBRTR3D PosiTector RTR Replica Tape Reader Height and Density Spare Probe

See More DeFelsko PosiTector RTR 3D

DeFelsko PRBRTR3D PosiTector RTR Replica Tape Reader Height and Density Spare Probe

See More DeFelsko PosiTector RTR 3D
Price:
$1,995.00
    warrenty

    Product Description
    DeFelsko PRBRTR3D Replica Tape Reader to Measure and Record 2D/3D Surface Profile Parameters
    Manufacturer: DeFelsko
    Gage Sold Separately

    The DeFelsko PosiTector PRBRTR3D Replica Tape Reader probe is used to Measure and Record 2D/3D Surface Profile Parameters.


    lineHow It Works
    line

    Click to View DeFelsko PosiTector RTR-H Surface Profile Gage How It Works


    lineSoftware
    line

    Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More

    line
    Related Products
    line

    PosiTector RTR
    Replica Tape Reader

    • PosiTector RTR Replica Tape Reader - Digital Spring Micrometer
    • Conforms to national and international standards including ISO 8503-5, ASTM D4417 Method C, NACE RP0287 and SSPC-PA17
    related


    lineDownloadsline

    DeFelsko PosiTector RTR 3D Replica Tape Reader to Measure and Record 2D 3D Surface Profile Parameters - Instruction Manual
    DeFelsko PosiTector RTR 3D Replica Tape Reader to Measure and Record 2D 3D Surface Profile Parameters - Literature
    DeFelsko Accessories for Inspection Instruments - Online Catalog

    F.A.Q.

    Do your instruments require any formal training for use? Do you offer 'demo' models?

    No. Our instruments are designed for simple operation, feature easy-to-use menus, instruction manuals, and helpful videos. In lieu of demonstration models, we provide unlimited technical support via telephone and/or email, and a limited 30-day money back guarantee.

    What is replica tape?

    Testex Replica Tape is a long-known method for characterizing a surface. It is simple, relatively inexpensive, and shows good correlation with results from other methods. It has the advantages of ruggedness, relatively low start-up cost, good repeatability and the option of retaining a physical replica of the surface being evaluated. The method is widely used and widely understood. It is particularly useful for measurements on curved surfaces that are difficult to measure directly with other instruments.

    It is therefore not surprising that it has become the most popular field method for measuring surface profile. Its operation is described in a number of international standards including ASTM D4417, ISO 8503-5, NACE SP0287, and AS 3894.5.


    Is the PosiTector RTR 3D calibrated at the factory?

    The PosiTector RTR 3D arrives fully calibrated and ready to measure. A Long-Form Certificate of Calibration traceable to PTB (for H and HL only) and NPL (for Ra and Rt) is included, which documents actual Rt and Ra readings taken by your instrument at our calibration laboratory on standards traceable to a national metrology institute. Beware of 'Certificates' or 'Certificates of Conformance' offered by competitors. These typically do not include actual instrument readings, and are often insufficient to meet common quality requirements.

    Which replica tape grade should I use?

    For most applications, Optical Grade XC is the appropriate tape grade. The PosiTector RTR 3D has been calibrated using the Optical Grade XC tape and the XC tape setting. When measuring 2D and 3D parameters, Optical Grade XC should be used. When measuring peak to valley height using the H parameter, it is possible to use either Optical or Regular C and XC tape.

    What is a 2D thumbnail image?

    A black and white two dimensional (2D) image is essentially a photograph of the burnished tape. It reveals a pattern of dark and light spots similar to what you might see if you put the replica tape in front of a light source. The bright areas are higher compressed tape (peaks) and dark areas are lower compressed tape (valleys). This image can be exported for inspection reports. Advanced models only.


    2D Thumbnail Image What is a 3D thumbnail image?

    The PosiTector RTR 3D uses a light intensity versus thickness algorithm to produce three dimensional (3D) images of the replicated surface. A low-resolution color image is quickly generated and displayed on the PosiTector which can also be exported into inspection reports. Advanced models only.


    3D Thumbnail Images What software does DeFelsko recommend for use with the PosiTector RTR 3D?

    The FREE PosiSoft Desktop software provides a simple, easy to use interface to import and analyze high-resolution .sdf files generated by the PosiTector RTR 3D. Within PosiSoft Desktop, a trace from the 3D plot can be analyzed, filtering settings can be modified, and 2D and 3D parameters can be viewed. If more detailed analysis is required, DeFelsko recommends OmniSurf and OmniSurf 3D produced by Digital Metrology (www.digitalmetrology.com).

    ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
    Models Price
    $1,995.00
    Recommended Accessories PRICE
    $50.00
    $50.00
    $45.00
    $335.00
    $20.00
    $95.00
    $10.00
    $225.00
    $25.00
    $25.00
    $10.00
    $30.00
    $20.00
    $10.00
    $10.00
    $20.00
    $50.00