Imada

Imada CAP-DTXS Cap Torque Testers

• 3 Ranges up to 85 lb-in
• Selectable real time and peak modes

Imada SBK-492 Calibration Fixture for DTX2 Cap Torque Tester

• Imada SBK-492 Calibration Fixture for DTX2 Cap Torque Tester
• Manufacturer: Imada
• Warranty: One Year

Imada DSV Vector Force Gauge

• Vector Force Gauge with Output
• Built-in tilt sensor with audible alert
• Accuracy ± 0.2%
• Measure force in lbs, Kgs or N
• 7 Ranges up to 220 lbs

Imada DST Digital Force Gauge

• Imada DST Digital Force Gauge with Output
• Accuracy ± 0.2%
• Measure force in lbs, Kgs or N
• 7 Ranges up to 220 lbs
• USB and RS-232C outputs

Imada ZTA Series Digital Force Gauge

• 1000lb Capacity Wire Pull Tester
• Supplied with Heavy-Duty Wedge Grips
• Manufacturer: Imada
• Warranty: One Year

Imada ZTA-DPU-Series Digital Force Gauge with Remote Sensor

• Imada ZTA-DPU-Series Digital Force Gauge with Remote Sensor with Output
• Accuracy ± 0.2%
• 11 Ranges up to 4,400 lbs
• Measure force in lbs, Kgs or N

Imada ZTA-LM Series Force Gauge with Button Sensor

• ZT-LM Digital Force Gauge with Remote Button Sensor (compression only)
• Accuracy: ± 0.5% F.S. ±1 LSD
• 11 Ranges up to 4,400 lbf (20.00 kN)
• Measure force in lbs, Kgs or N

Imada E2 Durometer / Hardness Tester

• Imada E2 Durometer - Hardness Tester
• Accuracy ± 1 point
• Lightweight, durable, recyclable, magnesium-alloy case
• Available in Shore A, D, E (ASTM D2240 compliant) and Asker C hardness scales

Imada SY Durometer Stand Lever-Operated Durometer Operating Stand

• Simple lever operation
• Auto Contact enables the durometer to make full, even contact
• Pneumatic damper maintains consistent test speed

Imada YMS Motorized Durometer Test Stand

• OLED display is visible in dark environments
• Simple operation: Press the MEASURE button
• Auto height adjustment

Imada TKD - TKX Digital Durometer with Output

• NIST Traceable Certificate included; ISO-17025 Optional
• USB output
• Modes: Peak, Single/ Dual Timer Hold and Real Time

Imada BP-6 Button Puller

• Imada Button Puller
  
• Capacity 30lbs
• Manufacturer: Imada
• Warranty: One Year

Imada CH-5000N Wire Terminal Grip Capacity 5000N

• Imada CH-5000N Wire Terminal Grip
  
• Capacity 5000N (1100 lbf, 500kgf)
• Warranty: One Year

Imada CH-500N Wire Terminal Grip Capacity 110 lbs

• Imada CH-500N Wire Terminal Grip
• Capacity 110 lbs (500 N, 50 kgf)
• Warranty: One Year

Imada CW-5000N Wire Fixture Table 5000N Capacity

• Imada CW-5000N Wire Fixture Table
• Capacity 1100 lbs (5000 N, 500 kgf)
• Manufacturer: Imada
• Warranty: One Year

Imada WG-100 Vise Chuck

• Discounts available if purchasing an Imada Force Test System of a force gauge and test stand; please call for a quote.
• Imada WG-100 Vise Chuck
  
• The Imada WG-100 Vise is ideal for slip-free attachment to base of test stand.
  
• Note: the WG-100 replaced the GT-30 Vise Chuck

Imada CW-500N Wire Wedge Grip

• Imada CW-500N Wire Wedge Grip
• Capacity 110 lbs (500 N, 50 kgf)
• Warranty: One Year

Imada DB-1X - DB-2X Data Input Button

• Imada DB-1X - DB-2X Data Input Button
  
• Send data to a PC spread sheet with the touch of a button
• Manufacturer: Imada
• Warranty: One Year

Imada DF-60 Hook for Corrugated Cardboard Seal Strength

• Imada DF-60 Hook for Corrugated Cardboard Seal Strength
  
• Capacity 50lbs (250 N, 25 kgf)
• Manufacturer: Imada
• Warranty: One Year

Imada FC Thin Film Grip

• Imada FC Thin Film Grip
• Use these spring loaded film grips to check tensile strength of thin film samples up to 2 mm thickness.
• Manufacturer: Imada
• Warranty: One Year

Imada GT-30-1 90° Peel Test Fixture

• Imada GT-30-1 90° Peel Test Fixture
• Maintains constant 90° angle during pull test
• Manufacturer: Imada
• Warranty: One Year

Imada FP Fine Point Grip

• Imada FP Fine Point Grip 11 lb Capacity
  
• Grip for small wire, components in narrow spaces.
• Manufacturer: Imada
• Warranty: One Year

Imada LP-99 Lexan Safety Shield

• Imada LP-99 Lexan Safety Shield
• Allows access to the control panel
• Manufacturer: Checkline
• Warranty: One Year

Imada BP-6 Button Puller

• Imada Button Puller
  
• Capacity 30lbs
• Manufacturer: Imada
• Warranty: One Year

Imada CH-5000N Wire Terminal Grip Capacity 5000N

• Imada CH-5000N Wire Terminal Grip
  
• Capacity 5000N (1100 lbf, 500kgf)
• Warranty: One Year

Imada CH-500N Wire Terminal Grip Capacity 110 lbs

• Imada CH-500N Wire Terminal Grip
• Capacity 110 lbs (500 N, 50 kgf)
• Warranty: One Year

Imada CW-5000N Wire Fixture Table 5000N Capacity

• Imada CW-5000N Wire Fixture Table
• Capacity 1100 lbs (5000 N, 500 kgf)
• Manufacturer: Imada
• Warranty: One Year

Imada WG-100 Vise Chuck

• Discounts available if purchasing an Imada Force Test System of a force gauge and test stand; please call for a quote.
• Imada WG-100 Vise Chuck
  
• The Imada WG-100 Vise is ideal for slip-free attachment to base of test stand.
  
• Note: the WG-100 replaced the GT-30 Vise Chuck

Imada CW-500N Wire Wedge Grip

• Imada CW-500N Wire Wedge Grip
• Capacity 110 lbs (500 N, 50 kgf)
• Warranty: One Year

Imada DB-1X - DB-2X Data Input Button

• Imada DB-1X - DB-2X Data Input Button
  
• Send data to a PC spread sheet with the touch of a button
• Manufacturer: Imada
• Warranty: One Year

Imada DF-60 Hook for Corrugated Cardboard Seal Strength

• Imada DF-60 Hook for Corrugated Cardboard Seal Strength
  
• Capacity 50lbs (250 N, 25 kgf)
• Manufacturer: Imada
• Warranty: One Year

Imada FC Thin Film Grip

• Imada FC Thin Film Grip
• Use these spring loaded film grips to check tensile strength of thin film samples up to 2 mm thickness.
• Manufacturer: Imada
• Warranty: One Year

Imada GT-30-1 90° Peel Test Fixture

• Imada GT-30-1 90° Peel Test Fixture
• Maintains constant 90° angle during pull test
• Manufacturer: Imada
• Warranty: One Year

Imada FP Fine Point Grip

• Imada FP Fine Point Grip 11 lb Capacity
  
• Grip for small wire, components in narrow spaces.
• Manufacturer: Imada
• Warranty: One Year

Imada LP-99 Lexan Safety Shield

• Imada LP-99 Lexan Safety Shield
• Allows access to the control panel
• Manufacturer: Checkline
• Warranty: One Year

Shimpo FG-CLV Clevis Grip

• Shimpo FG-CLV Clevis Grip
• Odd shaped parts, punched samples or tension springs are easily secured and tested. Concave shape to pins assures centering under load. Throat clearance with pin is .5" (12.7 mm) and can easily accept samples up to .375" (9.65 mm) wide.
• Manufacturer: Shimpo
• Warranty: One Year

Shimpo FG-TWN Cord and Twine Grip

• Shimpo FG-TWN Cord and Twine Grip
  
• A unique figure 8 wrap of specimen assures a center break and non-locking pins permit quick installation and release. Throat and pin clearance is .375" (9.65 mm) wide with the throat width being .5" (1.7 mm)
• Manufacturer: Shimpo

Shimpo FTS-X Force Test System

• Shimpo FTS-X Force Test System with USB Data Output
• Available in 5 Ranges up to 110 lbs.
• Includes Gauge and Test Stand

Shimpo FTS-HD High Capacity Force Test System

• Shimpo FTS-HD High Capacity Force Test System
• 1000 lb / 500 Kg / 5000 N Capacity
• Includes Gauge and Test Stand (FGV-1000HXY + FGS-1000H)

Imada ELM-2000 Digital Surface Speed Meter

Imada PSH High Capacity Mechanical Force Gauge

• Imada PSH Precision High Capacity Mechanical Force Gauge
  
• 11 Ranges up 500lbs / 300 Kg / 3000 N
  
• Intrinsically Safe for use in hazardous environments
• Accuracy ± 0.3%

Imada FB Mechanical Force Gauge

• Imada FB Economical Mechanical Force Gauge
• 25 Ranges up 100lbs / 50 Kg / 500 N
• Intrinsically Safe for use in hazardous environments

Imada PS High Precision Mechanical Force Gauge

• High Precision Mechanical Force Gauge
• 25 Ranges up 100lbs / 50 Kg / 500 N
• Intrinsically Safe for use in hazardous environments

Imada MF Mechanical Force Gauge

• Ergonomic, heavy-duty metal construction
• Intrinsically safe
• Capacity up to 100 lbf

Imada NLH Horizontal Lever Test Stand

• Horizontal Lever Test Stand
• Maximum load 220 lbf (100 kgf)
• Stroke 2?

Imada GT-30-1 90° Peel Test Fixture

• Imada GT-30-1 90° Peel Test Fixture
• Maintains constant 90° angle during pull test
• Manufacturer: Imada
• Warranty: One Year

Imada IPT-200 Embossed Carrier Tape Peel Tester

• Embossed Carrier Tape Peel Tester
• 180° peel for embossed carrier tape
• Stroke: 15.74" (400mm)

Imada P45-50N 45° Peel Tester

• Imada P45-50N 45° Peel Tester
• Peeling strength of a film cover of plastic container. For food and medical care etc.
• Peeling angle is 45 degree, and this angle is nearly practical condition of opening cover
• Manufacturer: Imada

Imada NS-600 LED Stroboscope

• Compact LED Stroboscope
• High efficiency LED solid-state light source - never needs replacement
• Wide measuring range - up to 120,000 fpm

Imada ESL-200 Portable LED Stroboscope, 6.0 - 150,000 fpm / rpm

• Imada ESL-200 Portable LED Stroboscope, 6.0 - 150,000 fpm / rpm
  
• Flash Range: 6.0 - 150,000 fpm/rpm
  
• Made in the USA

Imada SVH-220 Vertical Hand Wheel Test Stand

• Vertical Hand Wheel Test Stand
• Travel: 3mm per wheel rotation
• 220 Lb Capacity
• Manufacturer: Checkline

Imada SVL-220 Manual Lever Test Stand

• Imada SVL-220 Manual Lever Test Stand
• Easy to change from tension to compression mode
• 220 Lb Capacity
• Manufacturer: Checkline

Imada KV-11-S Micro Movement Test Stand

• Imada KV-11-S Micro-Movement Hand Wheel Test Stand with Digital Distance Meter
  
• For compression tests only
  
• Maximum Load 11 lbf (5 kgf)

Imada SH-220 Horizontal Hand Wheel Test Stand

• Imada SH-220 Horizontal Hand Wheel Test Stand
• 2 Ranges Up to: 0-220 lbs / 0-100 Kg / 0-1000N
• Manufacturer: Imada

Imada HV-300 / HV-500 Manual Hand Wheel Test Stand

• High Capacity Manual Hand Wheel Test Stand
• 2 Ranges Up to: 0-500 lbs / 0-250 Kg / 0-2500N
  
• 12" (300mm) Maximum Travel

Imada NLV-220 Vertical Lever Test Stand

• Imada NLV-220 Vertical Lever Test Stand
• 2 Models for testing Tension or Compression
  
• 220 Lb Capacity
• Manufacturer: Imada

Imada HV-110 Hand Wheel Test Stand

• Imada HV-110 Hand Wheel Test Stand - Optional Distance Meter
• 110lb Capacity HV-110 - 220lb Capacity HV-220
• 9" Maximum Travel - 16.5" Clearance (optional)

Imada MH2-110 Horizontal Motorized Test Stand

• High Performance Force Control Motorized Test Stand
• 110 lb Capacity
• Stroke: 9" (230mm)

Imada MX2 High Performance Motorized Test Stand

• Imada MX2 High Performance Motorized Test Stand
• 110lb and 550lb Capacity
• Manufacturer: Imada
• Warranty: One Year

Imada MX-110 Motorized Vertical Test Stand

• Imada MX2-110 Motorized Test Stand with FORCE CONTROL
• 110lb Capacity
• Manufacturer: Imada
• Warranty: One Year

Imada MX-275 Motorized Vertical Test Stand

• Imada MX-275 Motorized Vertical Test Stand
• 275lb Capacity
• Manufacturer: Imada
• Warranty: One Year

Imada MH-275 Motorized Horizontal Test Stand

• Imada MH-275 Motorized Horizontal Test Stand
• 275lb Capacity
• Manufacturer: Imada
• Warranty: One Year

Imada MH-750 Motorized Force Measurement Test Stands

• Imada MH-750 Motorized Force Measurement Test Stands
• Force Gauge sold Separately
• Easy to operate

Imada EMX-275 Ultra Precision, Force Control, Motorized Test Stand

• Imada EMX Ultra Precision, Force Control, Motorized Test Stand
• Force Gauge sold Separately
• Easy-to-use program dial and menu screens control distance, mode, speed, time and cycles

Imada FSA-1KE Material Tester, Integrated Force & Displacement Tester

• High resolution and high speed data output for data collection of up to 2,000 samples per second.
• 
  

Imada FSA-MSL Force - Displacement Tester

• The Imada FSA-MSL Material Tester is designed for force vs distance measurement. It is ideal for tests requiring very small movement, like switch tests.
• 4 Ranges up to 11 lbs / 5 Kg / 50 N Capacity
• 
  

Imada MH-500 Motorized Horizontal Test Stand

• Imada MH-500 Motorized Horizontal Test Stand
• 500lb Capacity
• Manufacturer: Imada
• Warranty: One Year

Imada MV-275 Motorized Vertical Test Stand

• Motorized Test Stand
  
• 275lb Capacity
  

Imada MV-500 - MV-1100 High Capacity Motorized Vertical Test Stands

• High Capacity Motorized Test Stand
  
• 500lb & 1100lb Capacities
  

Imada Cedar DIS-RL Digital Torque Screwdriver

• Imada Cedar DIS-RL Digital Torque Screwdriver
• 3 Ranges up to 90lb-in
  
• Units of measure: lb-in, kg-cm and N-cm (selectable)
  

Imada Cedar DID Digital Torque Screwdriver

• Imada Cedar DID Digital Torque Screwdriver
• 35 lbf-in & 4.5 lbf-in Capacities
• Units of measure: lb-in, oz-in, kg-cm, N-cm and N-m

Imada Cedar NDID-150CN Adjustable Torque Screwdriver

• Selectable units: ozf-in, lbf-in, kgf-cm, N-m and cN-m
• 400 data internal memory for torque data can be recalled and managed
• Accuracy: ±1% F.S. ±1 LSD

Imada SW-1SV-USB Data Acquisition Software for Torque

• Data Acquisition Software for Torque
• Full SPC and graphing capabilities

Imada HTGS Digital Torque Gauge

• Imada HTGS Digital Torque Gauge
• 4 Ranges up to 85.00 lbf-in
• 1,000 data memory for recall or download

Imada GLK Digital Torque Screwdriver

• Imada GLK Digital Torque Screwdriver
• 3 Ranges up to 45 lbf-in
• High accuracy ±1.5% F.S. both CW and CCW directions

Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches

• Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches
• 3 ranges up to 130 lb-in
• Units of measure: lb-in, oz-in, kg-cm, N-cm and N-m (selectable)
• USB Data Output

Imada Cedar DI-1M Digital Torque Tester

• Imada Cedar DI-1M Digital Torque Tester
• Air Tool & Impact Wrench Digital Torque Tester
• 4 Ranges up to 362.0 lb-ft / 50.00 kg-m / 500.0 N-m.
• For calibrating hand screwdrivers, wrenches, and power tools.
• Selectable Units: lb-ft, kg-m and N-m

Imada Cedar DI-4B-25 Digital Torque Tester for Air Tools and Impact Wrenches

• Imada Cedar DI-4B-25 Digital Torque Tester for Air Tools and Impact Wrenches
• Capacity:
  0.1 - 220.0 lbf-in
  0.1 - 250.0 kgf-cm
  0.01 - 25.00 N-m
  
• Selectable Units: lb-ft, kg-m and N-m

Imada DIR-IP Digital Torque Tester

• Digital Torque Tester with Remote Sensor
• 7 Ranges up to 2.0~362.0 lbf-ft / 0.20~50.00 kgf-m / 2.0~500.0 N-m
• 800 data memory for recall or for SPC download

Imada Cedar DWT-200 Digital Torque Tester for Manual Wrenches

• Digital Torque Tester for Manual Torque Wrenches
• Capacity 200 Nm

Imada HTGS Digital Torque Gauge

• Imada HTGS Digital Torque Gauge
• 4 Ranges up to 85.00 lbf-in
• 1,000 data memory for recall or download

Imada Cedar NTS-6 Motorized Rotating Friction Torque Tester

• Imada Cedar NTS-6 Motorized Rotating Friction Torque Tester
• 9 Ranges up to 45.00 lb-in

Cedar DIW Lightweight Digital Torque Tester / Wrench

• Cedar DIW Lightweight Digital Torque Tester / Wrench
• 1/4", 3/8" or 1/2" Drive
• Capacity: up to 87 ft-lbs
• Wrench head swivels 300°

Checkline GEK Adjustable and Ratchet Digital Torque Wrenches

• Checkline GEK Adjustable and Ratchet Digital Torque Wrenches
• High accuracy ±1.5% F.S. both CW and CCW directions
• 9 ranges up to 150 lbf-ft

Imada ACT-220 Automatic Wire Crimp Tester with Load Holding

• Imada ACT-220 Automatic Wire Crimp Tester
• Automatic Wire Crimp Tester with EL electro-luminescent display, measures up to 220 lbf
• ±0.5% Accuracy
• 1,500 Data Memory
• 2 Year Warranty

Imada WTT-HD Heavy Duty Wire Terminal Tester

• Imada WTT-HD Heavy-Duty Wire Terminal Tester Pull Tester
• Range: 0-220 lbs / 0-100 Kg / 0-1000N
• Measures in "Continuous" or "Peak" mode