Force and Torque Measurement
Alluris TMI-300 Digital Torque Meter with USB Output
Call for Price
About this item
View More Details
- With additional storage capability, peak detection for screw caps with tamper evident ring, and external USB storage in CSV data format
- Manufacturer: Alluris
- Warranty: One Year
View More Details
+Hand-held+Cap+Torque+Tester-200x350.jpg?rc=1)
-200x350.jpg?rc=1)
Imada Force Gauge Applications
Call for Price
About this item
View More Details
- High Capacity Motorized Test Stand
- Model Imada Force Gauge Applications
- Use this page to view a comprehensive list of Digital Force Gages and its applications
View More Details
Shimpo FG-TWN Cord and Twine Grip
$270.00 - $413.00
FREE Ground Shipping
About this item
View More Details
- Shimpo FG-TWN Cord and Twine Grip
- A unique figure 8 wrap of specimen assures a center break and non-locking pins permit quick installation and release. Throat and pin clearance is .375" (9.65 mm) wide with the throat width being .5" (1.7 mm)
- Manufacturer: Shimpo
View More Details
Shimpo FG-WDG Wedge Grip
$523.00 - $1,238.00
FREE Ground Shipping
About this item
View More Details
- Shimpo FG-WDG Wedge Grip
- Two capacities for lighter and heavier loads; spring-loaded jaws automatically close on the specimen and tighten as tension is applied. Ideal for testing wires, strip material and plastic tape or films.
View More Details
Shimpo FG-M6PUNCTUREST Puncture Attachment
$94.00
About this item
Imada PC Small Pin Grips
Discontinued Product
About this item
View More Details
- Imada PC Small Pin Grips For gripping small diameter wires, pins, filaments etc.
- Manufacturer: Imada
- Warranty: One Year
View More Details
Mark-10 09-1090 Set Point Cable
Discontinued Product
About this item
View More Details
- Mark-10 09-1090 Set Point Cable
- Stops / reverses motorized test stand at load set points
- Sends a set point signal to an external device
View More Details
Mark-10 11-1042 Overload protection module
Discontinued Product
About this item
View More Details
- Mark-10 11-1042 Overload protection module with Hi / Lo Limits Indicator
- Indicates pass or fail condition during a test
- Compatible with force gauges and torque gauges with set point outputs
View More Details
Mark-10 DP-1VR SPC Statistical Processor/Printer
Discontinued Product
About this item
View More Details
- Mark-10 DP-1VR SPC Statistical Processor/Printer
- Manufacturer: Mark-10
- Warranty: One Year
View More Details
Mark-10 G1053-ADC Axial Displacement Compensator
Discontinued Product
About this item
Mark-10 G1070 Self-Centering Vise Grip
Discontinued Product
About this item
View More Details
- Mark-10 G1070 Self-Centering Vise Grip
- Self -centering, removable jaws
- Manufacturer: Mark-10
- Warranty: One Year
View More Details
Imada SC Small Chucks
$462.00 - $504.00
FREE Ground Shipping
About this item
View More Details
- Small Chuck
- Test wire, components, other pull tests
- Manufacturer: Imada
- Warranty: One Year
View More Details
Imada WC-30 / WC-2000 Wire Wrapping Grips
$966.00 - $1,190.00
FREE Ground Shipping
About this item
Imada WG-1 / WG-2 Wire Terminal Grips
$546.00
FREE Ground Shipping
About this item
Imada WG-3 Multi Terminal Grip
$854.00
FREE Ground Shipping
About this item
View More Details
- Imada WG-3 Multi Terminal Grip
- Multi terminal grip has 12 wire gauge apertures
- Manufacturer: Imada
View More Details
Imada WG-300 Wire Cam Grip
Discontinued Product
About this item
Imada PC Small Pin Grips
Discontinued Product
About this item
View More Details
- Imada PC Small Pin Grips For gripping small diameter wires, pins, filaments etc.
- Manufacturer: Imada
- Warranty: One Year
View More Details
Mark-10 CP-150N Pin Grip
Discontinued Product
FREE Ground Shipping
About this item
View More Details
- Small Pin Grip measures samples from 0-.126in / 3.2mm
- For gripping small diameter wires, pins, filaments etc
- Manufacturer: Mark-10
- Warranty: One Year
View More Details
Mark-10 SW-1 Data Acquisition Software
Discontinued Product
About this item
View More Details
- Mark-10 SW Data Acquisition Software for DS2, Z2 Force Gauges & DTX Torque Gauge
- Full SPC and graphing capabilities
- Manufacturer: Mark-10
View More Details
Shimpo FG-M6PIN Grips Fine Wires and Filaments
$154.00 - $165.00
FREE Ground Shipping
About this item
View More Details
- Ideal for gripping fine wires and filaments; three ranges for checking samples of .02", .04", .08" (0.5, 1 and 2 mm) thick.
- Shimpo FG-M6PIN Grips Fine Wires and Filaments
- Manufacturer: Shimpo
- Warranty: One Year
View More Details
Shimpo FG-M6SP010U Spool Grip 100 lb Capacity
$275.00
FREE Ground Shipping
About this item
View More Details
- Shimpo FG-M6SP010U Spool Grip 100 lb Capacity
- Ideal for hard-to-hold items like thread, filaments, etc. The sample is wrapped around the spool, anchored by friction.
-
Shimpo FG-M6SP010U: 100 lb / 50 Kg / 500 N
The Shimpo FG-M6SP010U Spool Grip is ideal for hard-to-hold items like thread, filaments, etc. The sample is wrapped around the spool, anchored by friction.
View More Details
Shimpo Thread Adapters to Adapt Shaft Size
$19.00 - $119.00
About this item
View More Details
- Connect force gauges and attachments with different thread sizes. Use them with a force gauge and a test stand to create a complete testing system
View More Details
Shimpo FG-M6TAP30U Tape Grip
$319.00
FREE Ground Shipping
About this item
View More Details
- Shimpo FG-M6TAP30U Tape Grip 100 lb Capacity
- Self tightening lever action makes this fixture perfect for testing rubber, tape and paper.
- Warranty: One Year
View More Details
Shimpo FG-TWN Cord and Twine Grip
$270.00 - $413.00
FREE Ground Shipping
About this item
View More Details
- Shimpo FG-TWN Cord and Twine Grip
- A unique figure 8 wrap of specimen assures a center break and non-locking pins permit quick installation and release. Throat and pin clearance is .375" (9.65 mm) wide with the throat width being .5" (1.7 mm)
- Manufacturer: Shimpo
View More Details
Shimpo FG-WDG Wedge Grip
$523.00 - $1,238.00
FREE Ground Shipping
About this item
View More Details
- Shimpo FG-WDG Wedge Grip
- Two capacities for lighter and heavier loads; spring-loaded jaws automatically close on the specimen and tighten as tension is applied. Ideal for testing wires, strip material and plastic tape or films.
View More Details
Shimpo FG-M6PUNCTUREST Puncture Attachment
$94.00
About this item
Mark-10 R52 Torque Sensor for Tool Calibration
$960.00 - $1,025.00
FREE Ground Shipping
About this item
View More Details
- Universal Torque Sensor
- Capacities available from 10 ozin to 100 lbin
- Manufacturer: Mark-10
- Warranty: One Year
View More Details
Straightpoint WNI Wireless Compression Load Cells ISO 19901
$5,244.00 - $14,903.00
FREE Ground Shipping
About this item
View More Details
- Wireless connection to Hand-Held Indicator or direction connection to PC software
- Wireless range of 700 meter/2300 ft.
- Housing protection of Nema6/IP67
- Optional Center of Gravity Software
- Capacities up to 500 te (1,110,000 Lbs)
View More Details
Mark-10 Series FS05 Tension and Compression Force Sensors
$1,285.00 - $2,395.00
FREE Ground Shipping
About this item
Checkline FTS-3000 Force Test System
$1,062.00 - $1,144.00
FREE Ground Shipping
About this item
View More Details
- Compact footprint & lightweight enables usage in most locations
- Flexible Vertical or Horizontal operation
- Fine movement from the top-mounted wheel aids in precision testing
View More Details
Shimpo FTS-X Force Test System
Call for Price
About this item
View More Details
- Shimpo FTS-X Force Test System with USB Data Output
- Available in 5 Ranges up to 110 lbs.
- Includes Gauge and Test Stand
View More Details
Shimpo FTS-HD High Capacity Force Test System
$5,583.00
FREE Ground Shipping
About this item
View More Details
- Shimpo FTS-HD High Capacity Force Test System
- 1000 lb / 500 Kg / 5000 N Capacity
- Includes Gauge and Test Stand (FGV-1000HXY + FGS-1000H)
View More Details
Dillon X-C Mechanical Force Gauge with Hardened Ball
$1,881.00 - $8,976.00
FREE Ground Shipping
About this item
View More Details
- Mechanical Force Guage with Hardened Ball
- Available in capacities from 50 lb to 25,000 lb or 50 kg to 10,000 kg
- ±1% accuracy of full range
View More Details
Dillon U-Force Slim-line Mechanical Force Gauge
$2,450.00 - $3,795.00
FREE Ground Shipping
About this item
View More Details
- The Model Dillon U-Force Slim-line Mechanical Force Gauge is an accurate (±1% of full range) mechanical compression measurement instrument. Its slim-line design has repeatedly proven valuable in installations where space is at a premium
- 6 capacities ranging from 25 lb x .25 lb to 5,000 lb x 50 lb and 4 capacities ranging from 10 kg x .1 kg to 500 kg x 5 kg.
View More Details
Dillon X-ST Mechanical Force Gauge with Tension Calibration
$1,783.00 - $5,952.00
FREE Ground Shipping
About this item
View More Details
- Available in capacities from 100 lb to 10,000 lb or 25 kg to 5000 kg
- Accuracy is ±1%
View More Details
Dillon X-PP Tension and compression Force Gauge
$2,277.00 - $3,956.00
FREE Ground Shipping
About this item
View More Details
- Tension and compression Force Gauge
- Available in capacities from 50 lb up to and including 2,500-0-2,500 lb or from 50 to 1,000 kg
- Accuracy is ±2% of maximum dial reading
View More Details
Shimpo MF Mechanical Force Gauge
$567.00
FREE Ground Shipping
About this item
View More Details
- Shimpo Economical Mechanical Force Gauge
- Accuracy ± 0.2%
- 15 Ranges up to 100 lbs or 50kg
View More Details
STF-3550 Strap Tension Meter
$685.00
FREE Ground Shipping
About this item
View More Details
- Strap Tension Meter to measure the tension of 35 mm or 50 mm wide lashing straps. VDI Guideline 2700 / DIN EN 12195-1 / DIN EN 12195-2 / TUL-LO
- Certified by: TUL-LOG 01-2012
View More Details
Imada PSH High Capacity Mechanical Force Gauge
$1,925.00 - $2,121.00
FREE Ground Shipping
About this item
View More Details
- Imada PSH Precision High Capacity Mechanical Force Gauge
- 11 Ranges up 500lbs / 300 Kg / 3000 N
- Intrinsically Safe for use in hazardous environments
- Accuracy ± 0.3%
View More Details
Imada FB Mechanical Force Gauge
$602.00 - $770.00
FREE Ground Shipping
About this item
View More Details
- Imada FB Economical Mechanical Force Gauge
- 25 Ranges up 100lbs / 50 Kg / 500 N
- Intrinsically Safe for use in hazardous environments
View More Details
Imada PS High Precision Mechanical Force Gauge
$658.00
FREE Ground Shipping
About this item
View More Details
- High Precision Mechanical Force Gauge
- 25 Ranges up 100lbs / 50 Kg / 500 N
- Intrinsically Safe for use in hazardous environments
View More Details
Imada NLH Horizontal Lever Test Stand
$1,435.00 - $2,618.00
FREE Ground Shipping
About this item
Straghtpoint WLS Wireless Load Shackle
About this item
View More Details
- Wireless Loadshackle are designed to measure tension / weight in limited headroom applications
- Capacities up to 880000 lbs / 400 tonnes
View More Details
Imada GT-30-1 90° Peel Test Fixture
$2,590.00 - $3,346.00
FREE Ground Shipping
About this item
View More Details
- Imada GT-30-1 90° Peel Test Fixture
- Maintains constant 90° angle during pull test
- Manufacturer: Imada
- Warranty: One Year
View More Details
Imada IPT-200 Embossed Carrier Tape Peel Tester
Discontinued Product
About this item
View More Details
- Embossed Carrier Tape Peel Tester
- 180° peel for embossed carrier tape
- Stroke: 15.74" (400mm)
View More Details
Imada P45-50N 45° Peel Tester
Call for Price
About this item
View More Details
- Imada P45-50N 45° Peel Tester
- Peeling strength of a film cover of plastic container. For food and medical care etc.
- Peeling angle is 45 degree, and this angle is nearly practical condition of opening cover
- Manufacturer: Imada
View More Details
Mark-10 Myometer Kit Series EKM5
$1,750.00
FREE Ground Shipping
About this item
View More Details
- Mark-10 Myometer Kit Series EKM5
- Includes a Series 5 advanced force gauge, looped strap, hook, tabletop mount, and accessories
- 200 lbF (1,000 N) capacity
View More Details
Mark-10 EK3 Ergonomic Testing Kit
$1,175.00
FREE Ground Shipping
About this item
View More Details
- Advanced test kit with USB output for testing muscle strength, job task analysis, and more
- Includes a Mark-10 digital force gauge, hand grips, 3 padded attachments, and accessories
- Available in 200lb and 500 lb capacities
- 3 Year Warranty
View More Details
Mark-10 Series E Ergonomics Force Gauges Kit EKE
$1,650.00 - $2,130.00
FREE Ground Shipping
About this item
View More Details
- Mark-10 Series E Ergonomics Force Gauges Kit EKE
- Measure real time and peak push and pull forces
- Click-LockTM accessory mounting technology
- USB data output
View More Details
Shimpo Digital PT-Kits Physical Therapy Kits
$1,458.00 - $2,035.00
FREE Ground Shipping
About this item
View More Details
- Physical Therapy Kits for testing muscle strength and ergonomic force
- Ranges from 100 to 500 lbs (50 to 250 kg)
- Manufacturer: Shimpo
- Warranty: One Year
View More Details
Shimpo Mechanical Physical Therapy Kits
$1,194.00
FREE Ground Shipping
About this item
View More Details
- Physical Therapy Kits for testing muscle strength and ergonomic force
- 100 lb (50 kg) capacity
- Manufacturer: Shimpo
- Warranty: 1 Year
View More Details
Imada HV-110 Hand Wheel Test Stand
$1,673.00 - $2,877.00
FREE Ground Shipping
About this item
View More Details
- Imada HV-110 Hand Wheel Test Stand - Optional Distance Meter
- 110lb Capacity HV-110 - 220lb Capacity HV-220
- 9" Maximum Travel - 16.5" Clearance (optional)
View More Details
AWS TTCA Torque Arms, Calibration Arms, Torque Wheels, Calibration Wheel
$1,195.00 - $4,145.00
FREE Ground Shipping
About this item
View More Details
- AWS TT-CA Torque Arms, Calibration Arms, Torque Wheels for calibration of torque testers and transducers
- Supplied with NIST Traceable Calibration Certificate
- For calibration and verification of torque measuring equipment
View More Details
AWS TT-DA Torque Drive Adapters
$248.00 - $605.00
FREE Ground Shipping
About this item
View More Details
- AWS TT-DA Torque Drive Adapters
- Precision drive adapter to adapt torque testing equipment. Adapter do not have ball detents
- Manufacturer: AWS
- Warranty: One Year
View More Details
AWS AWS-1000 Series Mechanical Torque Wrench Loader
$4,065.00 - $5,150.00
FREE Ground Shipping
About this item
View More Details
- AWS AWS-1000 Series Mechanical Torque Wrench Loader
- 3 Ranges up to 1000 lb-ft / 1350 Nm
- Optional Motor Kit
View More Details
AWS TWT-410 Torque Wrench Loader
$3,495.00
FREE Ground Shipping
About this item
View More Details
- Torque Wrench Loader
- Calibrates and verifies torque wrenches up 250 lb-ft / 340 Nm
- Flexible design for various torque wrench lengths and brands
View More Details
Mountz LB-Series Mountz Torque Loading Bench
$14,519.00 - $26,824.00
FREE Ground Shipping
About this item
View More Details
- The Mountz LB Series torque calibration system is designed to ensure accurate calibration of torque wrenches.
- Three models with ranges up to 2000 lbf.ft.
View More Details
Mountz MZ-TA Torque Wheel and Torque Segment Arm
$2,214.00 - $28,434.00
FREE Ground Shipping
About this item
View More Details
- Torque Wheels and Torque Segment Arms
- Calibrate your torque testers in house with our Torque Wheels and Segment Arms
- Manufacturer: Mountz
- Warranty: One Year
View More Details
Checkline IA Torque Drive Insert Adapters, Sleeve Reducers
$39.00 - $99.00
About this item
View More Details
- Torque Drive Insert Adapters / Reducers
- Square drive insert adapters designed to reduce torque transducer drive sizes
View More Details
Mountz TDHA Torque Drive Hex Adapters
$432.00 - $604.00
FREE Ground Shipping
About this item
View More Details
- Mountz TDHA Torque Drive Hex Adapters
- Custom sizes available, inquire
- Manufacturer: Mountz
- Warranty: One Year
View More Details
Mountz Gedore PSE Preset Torque Screwdriver
Discontinued Product
About this item
View More Details
- Torque Limiting Screwdriver for Production
- Precision radial ball clutch "slips-free" when the preset torque is reached preventing over-torquing.
View More Details
Mountz SDX Torque Screwdriver Transducer
Discontinued Product
About this item
View More Details
- Mountz SDX Torque Screwdriver Transducer
- Accuracy +/- 0.25% of full scale.
- 2 Models for up to 50 lbf-in / 565 cN-m Capacity
View More Details
AWS Series IT Static Bench Mounted Torque Transducers
$1,490.00 - $2,904.00
FREE Ground Shipping
About this item
View More Details
- AWS Torque Transducer with Integrated Bench Stand
- Ideal for checking torque on hand and non-geared power tools
- 16 Ranges up to 5000 Lb-ft / 6770 N-m / 700 Kgf-m
View More Details
AWS AWS-4050 Portable Torque Tester Display
$1,795.00
FREE Ground Shipping
About this item
View More Details
- AWS-4050 Digital Torque Display
- Single-step access to all functions.
- For testing click, dial, and digital wrenches, plus most power tools including impulse and DC electric.
View More Details
AWS AWS-4050LC Ultra-Portable Torque Tester
$1,595.00
FREE Ground Shipping
About this item
View More Details
- Digital Torque Display
- Single-step access to all functions.
- For testing click, dial, and digital wrenches, plus most power tools including impulse and DC electric.
View More Details
AWS AWS-7000 Torque Display
$1,495.00
FREE Ground Shipping
About this item
View More Details
- AWS AWS-7000 Torque Display
- Provides an economical way to measure fastening data for critical fasteners
- Independent CW and CCW calibration with multipoint linearization.
- Manufacturer: AWS
View More Details
Mountz BLRTSX Brushless Rotary Torque Transducer
$5,572.00 - $7,245.00
FREE Ground Shipping
About this item
View More Details
- Mountz BLRTSX Brushless Rotary Torque Transducer
- Various models that range from 10 ozf-in to 738 lbf-ft/ 7cN-m to 1000 N-m
- For use with most power tools, pulse tools, high RPM tools or rotational measurement applications.
View More Details
Mountz BMX Torque Reaction Transducer
$2,214.00 - $10,005.00
FREE Ground Shipping
About this item
View More Details
- Torque Transducer
- Various models that range from 2 ozf.in to 20000 lbs-ft.
- For calibrating hand screwdrivers, wrenches, and power tools.
View More Details
Mountz RTSX Rotary Torque Transducer
$4,612.00 - $11,914.00
FREE Ground Shipping
About this item
View More Details
- Mountz Model RTSX
- Rotary Torque Transducer - Mountz
- Various models that range from 1 Lb-in to 1500 Lb-ft.
- For use with most hand tools, power tools or rotational measurement applications
View More Details
Mountz RTSX-A Rotary Torque and Angle Transducer
$6,998.00 - $7,642.00
FREE Ground Shipping
About this item
View More Details
- Mountz RTSX-A Rotary Torque and Angle Transducer
- Various models that range from 1 Lb-in to 800 Lb-ft.
- For use with most power tools or rotational measurement applications.
View More Details
Mountz BLRTSX Brushless Rotary Torque Transducer
$5,572.00 - $7,245.00
FREE Ground Shipping
About this item
View More Details
- Mountz BLRTSX Brushless Rotary Torque Transducer
- Various models that range from 10 ozf-in to 738 lbf-ft/ 7cN-m to 1000 N-m
- For use with most power tools, pulse tools, high RPM tools or rotational measurement applications.
View More Details
Mountz PTT-2000 Torque Analyzer
$3,508.00
FREE Ground Shipping
About this item
View More Details
- Mountz PTT-2000 Torque Analyzer
- Operates with Torque & Force sensors.
- Real time graph of torque vs. time using associated PC Windows software
View More Details
Mountz RTSX Rotary Torque Transducer
$4,612.00 - $11,914.00
FREE Ground Shipping
About this item
View More Details
- Mountz Model RTSX
- Rotary Torque Transducer - Mountz
- Various models that range from 1 Lb-in to 1500 Lb-ft.
- For use with most hand tools, power tools or rotational measurement applications
View More Details
Mountz TBIH Break-Over Torque Wrench with Interchangeable Head
$207.00
FREE Ground Shipping
About this item
View More Details
- Mountz TBIH Break-Over Torque Wrench with Interchangeable Head
- Interchangeable heads
- Torque Ranges: 25 ozf.in - 50 lbf.in
View More Details
Mountz HG-Series Hand Torque Multipliers
Call for Price
About this item
View More Details
- Precision tightening and loosening of all heavy duty fastening connections
- For operation in combination with a torque wrench
- Torque Multiplication Ratio - low energy input with high torque output
View More Details
Mountz Gedore ATB Adjustable Break-Over Torque Wrench
$700.00
FREE Ground Shipping
About this item
View More Details
- Break-Over Torque Wrench with Fixed Head
- Torque Ranges: 25 ozf.in - 50 lbf.in
- "Breaks-over" when preset torque is reached eliminating overtorquing.
View More Details
Shimpo WTT-FGS Wire Terminal Tester
Discontinued Product
About this item
View More Details
- Shimpo WTT-FGS Wire Terminal Tester
- Range: 0-110 lbs / 0-50 Kg / 0-500N
- Manufacturer: Shimpo
- Warranty: One Year
View More Details
Copyright © 2026 Abq Industrial