Name: Mark-10 F755 - F1505 Advanced Test Frames
Brand: Mark-10
SKU: 2055

Mark-10 F755 - F1505 Advanced Test Frames

Rigid and precise by design

External limit switches

Easy-to-service electronics

The Mark-10 F755 - F1505 Advanced Test Frames are designed for tension and compression force testing applications, with force capacities up to 1,500 lbF (6.7 kN). Select from a broad range of force sensor capacities and an expansive array of grips and fixtures.

Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.

Kit Contents

The F755-IMT, F755S-IMT, F1505-IMT, and F1505S-IMT advanced test frames include the following accessories:

Control panel, mounting bracket, and hardware
USB cable
Eye end kit for base Includes: eye end, anchor pin, (2) lock rings
2 Spanner wrench
Power cord
Allen wrench set
NIST-traceable certificate of calibration, force

Click image to enlarge

The F755-IM, F755S-IM, F1505-IM, and F1505S-IM advanced test frames include the following accessories:

USB flash drive containing software installation files
USB dongle
USB cable
Eye end kit for base Includes: eye end, anchor pin, 2 - lock rings
2 - Spanner wrench
Power cord
Allen wrench set
NIST-traceable certificate of calibration, force

Click image to enlarge

Features

Rigid and precise by design
- Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.
- Stepper motors and controllers drive a ballscrew and linear guideway for smooth, quiet operation, with virtually no speed variation under load.
External limit switches
- Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.
Easy-to-service electronics
- Most electronics are housed in an integrated module, easily replaced without special tools or processes.

Specifications

F755

F755S

F1505

F1505S

Load capacity1

750 lbF
[3.4 kN]

1,500 lbF
[6.7 kN]

Maximum travel

32.0 in
[813 mm]

14.2 in
[360 mm]

32 in
[813 mm]

14.2 in
[360 mm]

Speed range

0.001 - 60 in/min
[0.02 - 1,525 mm/min]

0.001 - 70 in/min
[0.02 - 1,800 mm/min]

Load accuracy (% of full scale)

Test frame + force sensor, calibrated together: ±0.1%
Test frame alone: ±0.1%
Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%

Speed setting accuracy

±0.2%

Load sampling rate

20,000 Hz

Data acquisition rate

1,000 Hz

Speed accuracy

±0%, stepper motor driven

Distance accuracy

±0.002 in [0.05 mm], factory-compensated at up to full load

Distance resolution

0.0005 in [0.01 mm]

Limit switch repeatability

±0.001 in [0.03 mm]

Power

Universal input 100-240 VAC, 50/60 Hz, 300W

Universal input 100-240 VAC, 50/60 Hz, 450W

Fuse type

4A, 3AG, SLO BLO

Weight (test frame only)

184 lb
[83 kg]

149 lb
[68 kg]

197 lb
[89 kg]

157 lb
[71 kg]

Shipping weight

235 lb
[107 kg]

195 lb
[88 kg]

247 lb
[112 kg]

205 lb
[93 kg]

Environmental conditions

Indoor use only
Up to 6,500 ft [2,000 m] above sea level
Temperature range: 40 - 95°F [5 - 35°C]
Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
Mains supply voltage fluctuations up to ±10 % of the nominal voltage
Transient overvoltages up to the levels of Overvoltage Category II
Use in environments up to Pollution Degree 2

Warranty

3 years [see individual statement for further details]

Conformance

Load capacity is reduced at higher speeds, as follows:
- F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
- F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min
May be extended via single- or double-column extensions.

Model No.	HS Code	ECCN	Country of Origin
F755-IMT, -IM F755S-IMT, -IM F1505-IMT, -IM F1505S-IMT, -IM AC1093-1,-2 AC1093	9024900000	EAR99	USA
CERT-DS	9024800000	EAR99	USA

IntelliMESUR

IntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including:

Limit testing to a load, break, or distance
Height measurement
Load holding
Cycle testing
Multi-step testing, utilizing any combination of the above functions

Run individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report.

From IntelliMESUR®’s home screen, quickly access up to 10 favorite tests. Associate an image with each favorite for easy identification.

Basic tests - Select a test type, and IntelliMESUR® will guide you through the setup.

Load Limit
Distance Limit
Break Limit
Load Hold
Cycle

line

Multi-step tests - Building upon basic test wizards, easily incorporate any combination of steps, with the ability to loop a sequence of steps. Select from:

Move to load
Move to distance
Move to break
Hold a load or position

Hold a load or position
Loop / cycle
Datum
Prompts
Save current load or position
Zero load or position
Return to Home position

Model Description

Test Frame + Pre-configured Tablet Control Panel

Model	Description
F755-IMT	Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 750 lbF / 3.4 kN, 110V*
F755S-IMT	Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, short, 750 lbF / 3.4 kN, 110V*
F1505-IMT	Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 1,500 lbF / 6.7 kN, 110V*
F1505S-IMT	Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, short, 1,500 lbF / 6.7 kN, 110V*

Test Frame + Standalone Software (for customer installation on a Windows device)

Model	Description
F755-IM	Test frame with IntelliMESUR® software, single license, vertical, 750 lbF / 3.4 kN, 110V*
F755S-IM	Test frame with IntelliMESUR® software, single license, vertical, short, 750 lbF / 3.4 kN, 110V*
F1505-IM	Test frame with IntelliMESUR® software, single license, vertical, 1,500 lbF / 6.7 kN, 110V*
F1505S-IM	Test frame with IntelliMESUR® software, single license, vertical, short, 1,500 lbF / 6.7 kN, 110V*

All test frame models contain a universal power supply (80 - 240V) and power cord with US prong style. Add suffix ‘E’ for European prong, ‘U’ for UK prong, or ‘A’ for Australian prong. Ex: F505-IMTE. Tablets are supplied with a universal power supply, however, are only available with a US prong. A prong adapter is included when one of the above-mentioned suffixes is specified.