Maintains 90° angle between the table and the direction of pull

---

Optional adjustable angle mount tilts the fixture up to ±30°.

---

Conforms to ASTM D6862, D3330, and D903

---

The Mark 10 G1109 Peel Fixture is designed for peel testing of tapes, films, foil seals, and other materials, per ASTM D6862 / D3330 / D903. A large, flat working table moves horizontally as the test stand’s crosshead moves up via direct cable linkage.

An optional adjustable-angle mount tilts the fixture up to ±30°. Another optional adapter uses an adjustable pulley to set the angle of pull, from 0° to 90°, while the working table remains horizontal. The horizontal orientation is suited for seal testing of filled containers, and can also be used for tapes and other materials.

An integrated limit switch automatically stops the motion of an ESM303 motorized test stand when the working table has reached its end of travel.

Kit Contents

Mark-10 G1109 90° Peel Fixture Limit switch cable Crosshead bracket G1078 miniature bollard grip Test stand mounting adapter Mounting hardware

Features

• Maintains 90° angle between the table and the direction of pull
• Optional adjustable angle mount tilts the fixture up to ±30°.
• Optional adjustable angle adapter with pulley, 0° to 90°, while preserving horizontal table orientation (max. force: 30 lbF [150 N])
• Large working area with threaded mounting holes
• Compatible with the ESM303 motorized test stand. Optional adapter available for ESM750 / ESM1500.
• Compatible only with force gauges, not remote load cells
• Conforms to ASTM D6862, D3330, and D903
• Note: not compatible with the ESM303 test stand when ordered with the AC1062 load cell/indicator mounting kit.

Specifications

Maximum force	100 lbF (500 N)
Maximum table travel	8.2 in (210 mm)
Weight (G1109 only)	6.0 lb (2.7 kg)

Downloads

Mark-10 G1109 Peel Fixture - Data Sheet

Mark-10 G1109 Peel Fixture - Data Sheet