MTM Multi-Channel Torque Tester

Price: $2,695.00 to $4,195.00

MTM Multi-Channel Torque Tester for Power Drivers & Wrenches

18 Ranges up to 5000 Lb-ft

Eight selectable engineering units: oz-in, lb-in, lb-ft, N-m, cN-m, Kgf-cm, gf-cm, Kgf-m

Programmable high/low setpoints

MTM Multi-Range Torque Testers

The MTM Series of torque transducer are designed to provide an economical way to measure and calibrate multiple torque tools. The MTMDP models (MTMDP-2S pictured) include an integrated display for a fully integrated tester.

Historically, transducers had to be purchased individually and connected to a display via a switch box or a group of cables. With the MTM series, up to 4 transducers can integrated in one compact housing.

The small footprint also allows for a clean, well-organized work space. This helps eliminate the endless searching for cables, adapters, and other accessories that may be needed.

Features such as independent CW and CCW calibration, multi-point linearization, metrology grade transducer shafts, and overload protection to 200% of full scale are standard. All of the above translate to a better product for you at an unbeatable price.

* MTMDP-2 coupled with an MTM-4.

Features

Available with 2, 3 or 4 torque transducers

Selectable units of: ft-lb, in-lb, in-oz, Kgf-m, Kgf-cm, gf-cm, cN-m, N-m

Small footprint of the MTM allows for a clean, well-organized work space

200% Overload protection

LED Indicator Shows Active Transducer

External transducers can be connected with cable input

Includes NIST Traceable calibration certificate with data for each transducer

Replaceable shaft design. If one shaft is damaged, replace that shaft, not the entire unit.

Photo Gallery - click any photo to enlarge

MTMDP-3S, with 3 horizontal transducers and flange-mount bracket

Torque Ranges

Model	Range	Drive Size	Run-Down Fixture
ITIO-10	1 - 10 Oz-in	1/4"	Included
ITIO-50	5 - 50 Oz-in	1/4"	Included
ITIO-100	10 - 100 Oz-in	1/4"	Included
ITI-10	1 - 10 Lb-in	1/4"	Included
ITI-25	2.5 - 25 Lb-in	1/4"	Included
ITI-50	5 - 50 Lb-in	1/4"	Included
ITI-100	10 - 100 Lb-in	1/4"	Included
ITI-250	25 - 250 Lb-in	3/8"	Included
ITI-500	50 - 500 Lb-in	3/8"	Included
ITF-100	10 - 100 Lb-ft	1/2"	Optional
ITF-150	15 - 150 Lb-ft	1/2"	Optional
ITF-250	25 - 250 Lb-ft	1/2"	Optional
ITF-600	60 - 600 Lb-ft	3/4"	Optional
ITF-1000	100 - 1000 Lb-ft	1"	Optional
ITF-2000	200 - 2000 Lb-ft	1"	Optional
ITF-3000	300 - 3000 Lb-ft	1 1/2"	Optional
ITF-5000	500 - 5000 Lb-ft	1 1/2"	Optional

The available engineering units of measurement on the MTM Torque Testers are oz-in, lb-in, lb-ft, N-m, N-cm, Kgf-m, Kgf-cm, gf-cm.

Don't see the range you need? Custom ranges are available, please call 718-846-6458 to discuss your application.

ER - Extended Range Option increases certified range to 5-100% (instead of 10-100%)

Related Products

TT-3000 Series Torque Tester
Bidirectional accuracy of ±0.5% of indicated reading

___________________________________________

RDF Joint Simulators / Run Down Fixtures
Required for accurate torque measurement for power-driven torque controled tools (electric, hydraulic or pneumatic)

Specifications

Calibrated Range	10-100% Full Scale, bi-directional (Standard)
Extended Range	5-100% Full Scale, bi-directional (ER Option)
Accuracy	±0.5% of indicated (within calibrated range)
Resolution	4 Active Digits
Overload Protection	200% Full Scale bi-directional
Operating Modes	Track, Peak, 1st Peak
Filtering	Selectable; 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz
Memory	data storage of up to 999 readings
Data Output	RS-232
Display	62 x 62mm backlit LCD
Alarm Limits	Panel Mounted LED for Visual Alarm Limits
Power	NiMH rechargeable batteries provide 8-10 hours continuous use
Weight	6-12 lbs, depends on number of transducers and configuration
Operating Temp	32 - 120 °F (0-50 °C)
Warranty	1 Year
Calibration Certificate	Includes NIST Traceable calibration certificate with data for each transducer
Standard Accesories	Joint Simulator for 1/4" & 3/8" drives, AC adapter/Charger
Optional Accessories	Joint Simulators for 1/2", 3/4" & 1" Transducers, Extended Ranger "ER" Option