Heavy Duty Tension Sensor
6 Tension Ranges 0-1000 g up to 0-20.0 Kg
Heavy-duty, hardened steel rollers makes this model especially suitable for tire cord, wires and similar filaments to high-impact loading
6 Tension Ranges
0-1000 g up to 0-50.0 Kg
Heavy-duty, hardened steel rollers makes this model especially suitable for tire cord, wires and similar filaments to high-impact loading.
Built-in signal conditioning with ZERO and SPAN pots provide a high-level, analog output to minimize the chance for signal interference.
Features
- Designed as a single-roller system -uses an existing reversing point for tension measurement.
- Rugged stainless steel housing is environmentally sealed.
- Supplied with a 10 ft. (3 m) shielded cable. Optional lengths are available.
- System of protection IP67 - waterproof.
- Overload protection up to 800%.
- Resolution of 0.1% and better
Specifications
| Accuracy | ± 1.5% FS or better |
| Sensor Excitation | 12 - 18 VDC, 21mA |
| Middle Roller Deflection | 0.5 mm (maximum) |
| Sensor Output | 0-1 V DC (standard)
0-10 V DC (optional)
proportional to tension |
| Overload Protection | 200% FS |
| Housing Material | Aluminum |
| Roller Diameter (Root) | 29.5 mm |
| Roller Material | Hardened Steel |
| Maximum Linear Speed | 2400 m/min |
| 5000 m/min | 40 to 105° F (5-40° C) |
| Frequency Response | 100 Hz |
Ranges
| Model | Range |
| TE-1K-24A | 0–1000 g |
| TE-2K-24A* | 0–2000 g |
| TE-5K-24C | 0–5.00 Kg |
| TE-10K-24C | 0–10.00 Kg |
| TE-20K-24D | 0–20.00 Kg |
| TE-50K-24E | 0–50.0 Kg |
*Can be supplied with a “B” configuration with low material deflection for wire applications.
Related Products
RMA
Radial Force Measuring Axle- High spring constants for the sensor permit high rotation speed ratings for the deflector roll
- High precision and excellent long-term stability
TS621
Strain Gauge Amplifier- Designed for use with a wide range of strain-gauge-based force, load and tension sensors
- 0-10VDC analog output
Downloads
