PCWI High Voltage Pulse Crest Meter, Jeep Meter or Voltmeter
Calibration Reference Device for the Compact range of Porosity Detectors
Can be used in accordance with ASTM G62, ASTM D5162, ASTM D4787, NACE RP0274, NACE SP0490, NACE SP0188, ANSI/AWWA C213, ANSI/AWWA C214, ISO 2746
New Part. No. PULSECREST - Old Part No. 0150
Measuring Range: 5 to 30kV
The PCWI PULSECREST High Voltage Pulse Crest Meter is used to verify output voltage and the calibration of Direct Current type Porosity and Holiday Detectors.
Kit Contents
- PCWI PULSECREST High Voltage Pulse Crest Meter
- Carry Case
- Instruction Manual
- One (1) year warranty
Features
- Used for checking & calibrating Porosity Detector output voltage
- Compact, lightweight hand-held unit
- Integral probe
- Conformance Certificate
Applications
- Verification of output voltage and set voltage of detectors when a load is applied to the probe
- To ensure accuracy, and to enable voltage adjustment (if necessary)
Specifications
| Range | 5 to 30kV |
| Resolution | 10V / 1V / 0.1V |
| Earth lead | Separate |
| Dimensions | 11,8" x 2,9" x 1,5" (300mm x 75mm x 40mm) |
| Weight | 13,7 oz (390g) |
Operation and Testing Procedure
Testing the output of the Detector, and verifying the voltage on the visual display
- Set up Detector for test.
- Switch on Detector, and set voltage.
- Connect crest meter into system, set the Detector’s voltage using the crest meter’s display.
Note: The crest meter will measure and indicate peak voltage. | Downloads
