Rigid and precise by design
External limit switches
Easy-to-service electronics
This family of force testers is designed for tension and compression force testing applications, with force capacities up to 1,500 lbF (6.7 kN). Select from a broad range of force sensor capacities and an expansive array of grips and fixtures.
Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.
Kit Contents
The F755-IMT, F755S-IMT, F1505-IMT, and F1505S-IMT advanced test frames are shipped as shown at left, and includes the following accessories:
- Control panel, mounting bracket, and hardware
- USB cable
- Eye end kit for base Includes: eye end, anchor pin, (2) lock rings
- 2 Spanner wrench
- Power cord
- Allen wrench set
- NIST-traceable certificate of calibration, force
Features
- Rigid and precise by design
- Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.
- Stepper motors and controllers drive a ballscrew and linear guideway for smooth, quiet operation, with virtually no speed variation under load.
- External limit switches
- Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.
- Easy-to-service electronics
- Most electronics are housed in an integrated module, easily replaced without special tools or processes.
Specifications
| F755 | F755S | F1505 | F1505S |
|---|
| Load capacity1 | 750 lbF
[3.4 kN] | 1,500 lbF
[6.7 kN] |
| Maximum travel | 32.0 in
[813 mm] | 14.2 in
[360 mm] | 32 in
[813 mm] | 14.2 in
[360 mm] |
| Speed range | 0.001 - 60 in/min
[0.02 - 1,525 mm/min] | 0.001 - 70 in/min
[0.02 - 1,800 mm/min] |
| Load accuracy (% of full scale) | - Test frame + force sensor, calibrated together: ±0.1%
- Test frame alone: ±0.1%
- Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%
|
| Speed setting accuracy | ±0.2% |
| Load sampling rate | 20,000 Hz |
| Data acquisition rate | 1,000 Hz |
| Speed accuracy | ±0%, stepper motor driven |
| Distance accuracy | ±0.002 in [0.05 mm], factory-compensated at up to full load |
| Distance resolution | 0.0005 in [0.01 mm] |
| Limit switch repeatability | ±0.001 in [0.03 mm] |
| Power | Universal input 100-240 VAC, 50/60 Hz, 300W | Universal input 100-240 VAC, 50/60 Hz, 450W |
| Fuse type | 4A, 3AG, SLO BLO |
| Weight (test frame only) | 184 lb
[83 kg] | 149 lb
[68 kg] | 197 lb
[89 kg] | 157 lb
[71 kg] |
| Shipping weight | 235 lb
[107 kg] | 195 lb
[88 kg] | 247 lb
[112 kg] | 205 lb
[93 kg] |
| Environmental conditions | - Indoor use only
- Up to 6,500 ft [2,000 m] above sea level
- Temperature range: 40 - 95°F [5 - 35°C]
- Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
- Mains supply voltage fluctuations up to ±10 % of the nominal voltage
- Transient overvoltages up to the levels of Overvoltage Category II
- Use in environments up to Pollution Degree 2
|
| Warranty | 3 years [see individual statement for further details] |
| Conformance | CE |
- Load capacity is reduced at higher speeds, as follows:
- F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
- F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min
- May be extended via single- or double-column extensions.
| Model No. | HS Code | ECCN | Country of Origin |
F755-IMT, -IM
F755S-IMT, -IM
F1505-IMT, -IM
F1505S-IMT, -IM
AC1093-1,-2
AC1093 | 9024900000 | EAR99 | USA |
| CERT-DS | 9024800000 |
IntelliMESUR
| IntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including: |  |
- Limit testing to a load, break, or distance
- Height measurement
- Load holding
- Cycle testing
- Multi-step testing, utilizing any combination of the above functions
Run individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report.
From IntelliMESUR®’s home screen, quickly access up to 10 favorite tests. Associate an image with each favorite for easy identification. Basic tests - Select a test type, and IntelliMESUR® will guide you through the setup. - Load Limit
- Distance Limit
- Break Limit
- Load Hold
- Cycle
| | |
Multi-step tests - Building upon basic test wizards, easily incorporate any combination of steps, with the ability to loop a sequence of steps. Select from: - Move to load
- Move to distance
- Move to break
- Hold a load or position
| - Hold a load or position
- Loop / cycle
- Datum
- Prompts
- Save current load or position
- Zero load or position
- Return to Home position
| |
Model Description
Test Frame + Pre-configured Tablet Control Panel
| Model | Description |
|---|
| F755-IMT | Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 750 lbF / 3.4 kN, 110V* |
| F755S-IMT | Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, short, 750 lbF / 3.4 kN, 110V* |
| F1505-IMT | Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 1,500 lbF / 6.7 kN, 110V* |
| F1505S-IMT | Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, short, 1,500 lbF / 6.7 kN, 110V* |
All test frame models contain a universal power supply (80 - 240V) and power cord with US prong style. Add suffix ‘E’ for European prong, ‘U’ for UK prong, or ‘A’ for Australian prong. Ex: F505-IMTE. Tablets are supplied with a universal power supply, however, are only available with a US prong. A prong adapter is included when one of the above-mentioned suffixes is specified.
Related Products
Downloads
