The JFE Advantech SH-22A Metal Hardness Tester is designed for precise measurement of hardness in difficult-to-reach areas of compact parts, metal casts, gears, crankshafts, component parts, and more. It is ideal for the inspection and maintenance of large-scale structures, vehicles, ships, steel towers, bridges, and aircraft.
- JFE Advantech SH-22A Metal Hardness Tester
- Display Unit
- Probe (with grip SH-P26)
- Probe Cable (1.5m)
- Hardness Standard Block (approx. 55HRC) for SH-22A-E1 : Around 600HV
- Standard Attachment SH-P16
- Attachment for Narrow Area (round-shaped) SH-P17
- AC adapter 100V to 240V (A10WN-09010I)
- Recharger (MK-9512)
- Lithium Ion Battery (MK-9511) & Instruction Manual
- Narrow / curved surface can be measured by small diameter probe (compared to the SH-21)
- Tiny indentation (Approx. 0.1mm)
- High durability, rated for over 1 million measurements
- Quickly gets measurements
- Measurement is not affected by material or mass
- Measurement can be done in all directions
- Free from periodic parts replacement by adoption of static loading method
- Static loading method with Vickers indenter
- Upper / Lower limit alarm setting available
| Measuring Indentor: | Diamond indenter for Micro-Vickers, (facing-to- surface angle of 136°)
|
| Testing Force SH-22A-E2: | Approx 2kgf (roughly 20N)
|
| Testing Force SH-22A-E1: | Approx 1kgf (roughly 10N)
|
| Testing Force SH-22A-E4: | Approx 4kgf (roughly 40N)
|
| Measuring Range Rockwell hardness: | HRC 10.0 - 70.0
|
| Measuring Range Vickers hardness: | HV 100 - 1000
|
| Measuring Range Shore hardness: | HS 20.0 - 100.0
|
| Measuring Range Brinell hardness: | HBW 85 - 550
|
| Resolution: | 1HV, 0.1HRC, 0.1HS, 1HB, 1N/mm2 (tensile strength)
|
| Repeatability HRC: | ± 1.0HRC
|
| Repeatability HV: | ± (3%rdg)HV
|
| Repeatability HS: | ± 1.0HS
|
| Repeatability HB: | ± (3%rdg)HB
|
| Applicable test materials: | Steel is the principle material, other metallic materials may also be measured by calibrating against a standard hardness test block
|
| Display: | Digital display (LCD, 4 digits) with EL backlight
|
| Temp limit: | 0-50 C Ambient
|
| Power: | AC adapter(100 - 240V) or lithium ion rechargeable battery
|
| Battery Life: | 5 hours using backlight, 8 hours without backlight
|
| Dimensions Display: | 97(W) x 50(D) x 170(H) mm
|
| Dimensions Probe diameter: | 20mm, length 195mm
|
| Weight Display: | 400g (including battery)
|
| Weight Probe and cable: | approx. 400g
|
| Carrying case dimensions: | 489(W) x 200(D) x 132(H) mm
|
| Output: | RS-232C output used for data transmission or printing
|
| Frequency: | Motorized / manual switchover type approx 69-71kHz, Manual type (optional) approx 38-40kHz
|
| Conversion: | HV, HRC, HS, HB, N/mm2 according to JIS B 7731, ASTM E 140, DIN 50150
|
| Warranty: | 1 Year |
The Checkline SH-21 Metal Hardness Tester - Rockwell HRC is designed for precise measurement of hardness in difficult to reach areas of compact parts, metal casts, gears, crank shafts, component parts and more. It is ideal for inspection and maintenance of large-scale structures, vehicles, ships, steel towers, bridges, aircraft.
The InnovaTest TIME5100 Metal Hardness Tester is designed for an extremely wide range of applications. They are especially recommended for Hardness Measurement on the shop floor. The automatic identification of the impact test direction makes them easy to use. Hardness tests are possible at any angle, even upside down. The data memory stores up to 270 values. Data can be transferred via USB interface to a computer or printer.
