Imada CAP-DTXS-85 Digital Cap Torque Tester - 85 lbf-in capacity

See More Cap Torque Testers

Imada CAP-DTXS-85 Digital Cap Torque Tester - 85 lbf-in capacity

See More Cap Torque Testers
Price:
$2,126.00
    warrenty

    Product Description
    Imada CAP-DTXS Cap Torque Testers
    3 Ranges up to 85 lb-in
    Selectable real time and peak modes

    The Imada CAP-DTXS Cap Torque Testers is an easy-to-use, high-precision cap torque tester that features a large electroluminescent display that clearly indicates the real-time and peak torque. Color-coded LED indicators alert the user to Go/NoGo conditions. Orange lights indicate a value less than low setpoint, green lights between high and low, and red for over the high.

    The Imada CAP-DTXS Cap Torque Testers is supplied with ZT Logger data acquisition software. It can download data from the tester memory or captures continuous data at 10 points/second. Zero the tester or capture data while at the computer. All tester programming can be set and saved from the software.

    Optional Force Recorder data acquisition software is designed to process up to 2,000 data per second.

    All Imada CAP-DTXS Cap Torque Testers include a 3 Point Calibration Certificate traceable to NIST. The imdada DTXS cap torque testers include AC adapter/charger and built-in Ni-MH rechargeable batteries, 1″ high standard pegs (optional long pegs and calibration kit available).


    line
    Features
    line

    • Test cap loosening (CCW) and tightening (CW) torque
    • Selectable real time and peak modes
    • USB, RS-232, Digimatic and Analog outputs
    • Selectable units of lbf-in, kgf-cm, N-m, ozf-in, N-cm
    • 1000 data point memory capacity
    • Programmable high/low setpoints with color-coded LED indicators and audible signal
    • Overload and low battery indicators
    • 200% overload capacity
    • DTXS accommodates samples from 20 up to 160 mm (0.787" - 6.30")
    • Four rubber-coated 1 inch pegs are included with DTXS
    • Optional "Small Table" accommodates samples from 7 up to 50 mm (0.275" - 2")
    • Optional Peg sizes/material available
    • Include 3 Point Calibration Certificate traceable to NIST. ISO 17025 Calibration Certification optionally available
    • 2 Year Warranty


    line
    Specifications
    line

    Accuracy±0.5%F.S.±1digit
    Unit of measurementlbf-in, kgf-cm, N-m, ozf-in, N-cm
    Display4-digit
    Display update10 times/ sec
    Auto Zero Reset1.0 to 60 seconds (selectable)
    Sampling rate2,000 samples/second (max) thru the USB port
    Safe overload ratingApprox. 200%
    Operating EnvironmentTemperature: 0-40 °C Humidity: 20 -80%RH
    OutputOutputs USB, RS-232C, Digimatic and ± 2 VDC analog output (D/A),Comparator 3 steps (-NG/OK/+NG), Overload alarm
    Overload warningApprox.110%F.S. (Warning message and alarm )
    SensitivityMax, High, Medium, Low (selectable)
    External connecting switchSEND (a point of contact holding), Zero reset, Peak, ON/OFF setting
    Auto Power Off5, 10, minutes or OFF (selectable)
    PowerBuilt-In Rechargeable Ni-MH battery pack or via AC-Adapter (100-240V AC)
    Battery Lifeapprox. 8 hours (recharge time approx. 10 hours)
    Battery IndicatorIndicates three charge states high, medium and low
    Plug TypeUSA Blade Type (Select Euro Plug Adapter for use in 230V Countries)
    WeightApprox. 10 Lbs/4.5kg (Including Standard table and Standard pins)
    Warranty2-Years


    line
    Torque Ranges
    line

    ModelCAP-DTXS-15CAP-DTXS-40CAP-DTXS-85
    lbf-in15.00 (0.01 lbf-in)40.00 (0.01 lbf-in)85.0 (0.1 lbf-in)
    kgf-cm20.00 (0.01 kgf-cm)50.00 (0.01 kgf-cm)100.0 (0.1 kgf-cm)
    N-cm200.0 (0.1 N-cm)500.0 (0.1 N-cm)1000 (1 N-cm)
    Nm2.000 (0.001 Nm)5.000 (0.001 Nm)10.000 (0.01 Nm)
    ozf-in240.0 (0.1 ozf-in)640.0 (0.1 ozf-in)1360 (1 ozf-in)


    line
    Optional Small Table
    line

    Clamps diameters from 7mm ~ 50mm

    DT-STDT-ST-01DT-ST-02
    Small table with standard pegsSmall table with steel pegsSmall table with long pegs


    line
    Related Products
    line

    Mark-10 CAP-TT01 Cap Torque Tester With Data Output

    • 6 Ranges up to 250 lb-in / 28 N-m

    line

    Shimpo TNP Cap Torque Tester

    • Selectable units of measure: lbf-in, kgf-cm, N-m and N-cm

    line

    Imada SBK-492 Calibration Fixture for DTX2 Cap Torque Tester

    • Designed to provide an economical way to measure and calibrate multiple torque tools

    ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
    Models Price
    $2,126.00
    Recommended Accessories PRICE
    $234.00
    $108.00
    $108.00
    $108.00
    $143.00
    $258.00
    $315.00
    $315.00
    $830.00
    $830.00
    $887.00
    $65.00