Precision Material Thickness Gauge
For textiles and non-woven textiles according to DIN EN ISO 5084
For fleece according to DIN EN ISO 9073-2
Thickness Gauge to determine the material thickness of all non-woven fabrics. With these instruments the most popular checking methods can be applied for textiles, felt, geomaterials, paper, floor coverings, leather, foils, etc.
According to international standards DIN, EN and ISO
Common Standards
For textiles and non-woven textiles according to DIN EN ISO 5084 (measuring face 20 cm²/pressure 0.1 kPa und 1 kPa)
For fleece according to DIN EN ISO 9073-2 (measuring face 25 cm²/pressure 0.1 kPa and 0.5 kPa)
For geomaterials according to DIN EN ISO 964-1 (measuring face 25 cm²/pressure 2 kPa and 20 kPa, not 200 kPa)
Kit Contents
- Checkline D-2000 Precision Material Thickness Gauge
- Sub-D9/USB adapter cable
- USB AC adapter
- Calibration report
- Operating instructions
- Transport packing case
Features
- Rigid housing frame
- Separate measuring block, incased against outside external impacts, for highest accuracy and repeatability
- Switch-selectable measuring units mm / inch
- RS 232 data output
- Resolution 0.01 mm - standard, 0.001 mm - optional
- Feeler movement manual by plunger
- Includes Calibration Certificate
- Optional software for data transfer and analysis - Part No. SW-50
Specifications
| Resolution | 0.001 mm / 0.0001 inch |
| Measuring range | 0 - 25 mm / 1 inch |
| Depth of jaws | 200 mm |
| Display | LCD 6 digit, 8.5 mm high |
| Measuring principle | Capacitive |
| Measuring pressure | < 1.4 N |
| Feeler shape | a,b,c,d or e |
| Lifting device | Operating by lifting device - self closing |
| Data output | RS 232, optical coupling |
| Power supply | Battery 3 V Lithium, CR 2032 |
| Temperature range | 10 - 45°C |
| Weight, net | 1000 g |
Available Models
*D-2000-P and 2000-F supplied with a resolution of 0.001mm
Options
| Code R | Higher resolution 0.001 instead of 0.01 mm |
| Code M | Motorized feeler movement 2.5 mm/sec. operated by foot plug |
| Code T | Adjustable measuring time 2 to 32 seconds in 2 sec. steps |
| Code E | Higher measuring range 0... 25 mm |
| Code V | Adjustable measuring range 0 - 10 mm or 0 - 25 mm |
| Code P | Additional weights |
| Code F | Additional feeler shape according to customer specification |
| DKD-Cal | Calibration report from a DKD authorized laboratory |
Related Products
J-40-T
Thickness Gauge
- Swing-out foot for on-table operation
- Digital display with selectable units inch or mm
