Ultrasonic Corrosion Thickness Gauges

F.A.Q.


Why use a dual-element corrosion thickness gauge instead of a single-element precision gauge?

Dual-element transducers contain two separate piezoelectric crystals (one transmitter and one receiver) mounted at a slight roof angle on an acoustic delay line inside a single housing. This V-path "pitch-catch" geometry focuses ultrasonic energy just beneath the front surface and is far more effective at capturing scattered echoes reflected from irregular, rough, or pitted internal pipe and tank walls than a single-element precision probe.

How does Echo-Echo (Thru-Paint) mode eliminate paint and epoxy coating errors?

In standard Pulse-Echo (P-E) mode, the gauge measures the transit time from the initial probe pulse to the first back-wall echo—which includes both the coating and the metal wall. Because sound velocity in paint (~0.095 in/µs) is roughly one-third the velocity in carbon steel (~0.233 in/µs), every 0.010" of paint adds roughly 0.025"–0.030" of false thickness to a steel reading. In Echo-Echo (E-E / Thru-Paint) mode (available on the Checkline TI-25MXT, Dakota ZX-6 / ZX-6DL, ElektroPhysik MiniTest 440, and all CMX / MMX / MVX models), the gauge measures the time interval between two consecutive back-wall echoes reverberating strictly inside the metal substrate, completely canceling out the paint layer without scraping or sandblasting.

When do I need an A-Scan or B-Scan display on a corrosion thickness gauge?

  • Digital-Only Gauges (ZX Series, TI-25MX / TI-25MXT): Ideal for routine thickness surveys on homogeneous carbon steel, stainless steel, aluminum, and plastic pipes or tanks.

  • B-Scan Cross-Section Gauges (TI-MMX-SDL, Dakota MX1-DL, TI-CMXDLP, Dakota CMX2-DL): Recommended when you want to visually map and record the contour of the bottom wall surface as you drag the probe across a corroded pipe or tank plate.

  • A-Scan + B-Scan Waveform Gauges (Checkline TI-MVX, Dakota MX2-DL / MVX): Essential for severe internal pitting, mid-wall laminations, coarse-grain castings, and high-temperature inspections where the operator needs to view the actual RF/rectified ultrasonic echo and adjust threshold gates, blanking, and gain manually.

Can these ultrasonic gauges measure cast iron, aluminum, and non-metallic materials like plastic or glass?

Yes. All Dakota Ultrasonics, Checkline, and ElektroPhysik MiniTest 440 gauges feature adjustable sound velocity (0.0120 to 0.7300 in/µs or 305 to 18,542 m/s on ZX/TI-25MX series) plus preprogrammed material velocities to measure carbon steel, stainless steel, aluminum, brass, copper, cast/ductile iron, glass, ceramics, and rigid plastics (such as PVC, PE, and nylon). For thick cast iron or attenuative plastics/composites, pairing the gauge with a lower-frequency 1.0 MHz or 2.25 MHz transducer ensures deeper acoustic penetration.

Checkline TI-CMXDL Data-Logging Ultrasonic Coating and Wall Thickness Gauge

$2,250.00 - $2,400.00
FREE Ground Shipping
About this item
  • Checkline TI-CMXDL Ultrasonic Coating & Wall Thickness Gauge with datalogging
  • Resolution: .001" (0.01 mm)
  • Datalogging: YES

View More Details

Checkline TI-CMXDLP Data-Logging Ultrasonic Coating and Wall Thickness Gauge

$3,015.00 - $3,725.00
FREE Ground Shipping
About this item
  • Checkline TI-CMXDLP Data-Logging Ultrasonic Coating and Wall Thickness Gauge
  • Resolution: .001" (0.01 mm)
  • Datalogging: YES

View More Details

Checkline TI-MMX-SDL High Performance Ultrasonic Thickness Gauge

$2,400.00
FREE Ground Shipping
About this item
  • Checkline TI-MMX-SDL High Performance Ultrasonic Thickness Gauge
  • Enhanced Data Logging with time based B Scan for a cross section view
  • Resolution: .001" (0.01 mm)
  • Datalogging: YES

View More Details

Checkline TI-MVX Ultrasonic Thickness Gauge with Enhanced Display with T-102-270...

$2,850.00
FREE Ground Shipping
About this item
  • Checkline TI-MVX Ultrasonic Thickness Gauge with Enhanced Display
  • Enhanced graphic scope Displays A Scan & B Scan for a cross section view
  • Resolution: .001" (0.01 mm)
  • Datalogging: YES

View More Details

ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge

$6,760.00
FREE Ground Shipping
About this item
  • Magnetic Wall Thickness Gauge for Plastic Bottles, Titanium Turbine Blades, and more
  • Ranges up to 24mm / 1"

View More Details

ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge

Call for Price
About this item
  • Uses Pulse-Echo Principle of Ultrasonics
  • Basic Ultrasonic Thickness Gauge with adjustable calibration for a wide range of materials
  • Several Transducers are optionally available including one for High Temperature materials (350 °C)
  • Automatic identification of probes

View More Details

ElektroPhysik MiniTest 430 Ultrasonic Wall Thickness Gauge

Call for Price
About this item
  • Built-in Datalogger with 5000 data values (500 values in 10 batches ) with USB Output
  • Includes "Scan-Mode" to display MIN and MAX values at 10 readings/second
  • Automatic identification of probes with Auto Probe Zero
  • Several Transducers are optionally available including one for High Temperature materials (350 °C)

View More Details

ElektroPhysik MiniTest 440 Ultrasonic Wall Thickness Gauge

Call for Price
About this item
  • Thru-Paint Mode (E-E) eliminates the Coating & only measures Wall Thickness
  • Built-in Datalogger with 5000 data values (500 values in 10 batches ) with USB Output
  • Includes "Scan-Mode" to display MIN and MAX values at 10 readings/second
  • Several Transducers are optionally available including one for High Temperature materials (350 °C)

View More Details

ElektroPhysik StratoTest-4100 Asphalt Thickness Gauge

Call for Price
About this item
  • Non-destructive measurement
  • TP D-StB 12 approved
  • Measuring range up to 400 mm

View More Details


Copyright © 2026 Abq Industrial