Bolt Tension Transducers
F.A.Q.
How do I choose the correct transducer diameter (1/8", 1/4", or 1/2") for my bolt size?
Always select a transducer whose active crystal diameter is smaller than the flat contact spot on the bolt head or stud end, while remaining large enough to project a strong, collimated beam down the bolt shaft:
1/8"(3.2 mm) Diameter (T-700/T-5903): Best for small fasteners (1/4"to1/2"thread diameter) or socket-head cap screws with narrow flat rims.1/4"(6.35 mm) Diameter (T-702/T-5023): Ideal for medium bolts and studs (1/2"to1"thread diameter).1/2"(12.7 mm) Diameter (T-704/T-5043): Recommended for large structural bolts, flange studs, and long tie-rods (1"diameter and larger) to maximize acoustic energy over long transit paths.
Should I select a 2.25 MHz, 5.0 MHz, or 10.0 MHz Bolt Tension Transducer?
- 10.0 MHz (
T-700-4405/T-702-4405): Produces a very short wavelength with crisp echo resolution—ideal for short bolts (1"to6"length) and fine-grained aerospace or automotive fasteners. - 5.0 MHz (
T-704-2405/T-702-2405/T-5043-2855): The universal industry standard for general industrial bolting (2"to48"+length) in petrochemical flanges, wind turbines, and heavy machinery. - 2.25 MHz (
T-704-1405/T-5043-1855): Provides superior acoustic penetration for very long studs, anchor rods, and tie-rods (up to100 ft) or coarse-grained alloys that attenuate higher frequencies.
When should I use a Non-Magnetic transducer instead of a Magnetic Bolt Transducer?
Choose a Magnetic Transducer (
T-700, T-702, T-704) whenever testing ferromagnetic carbon or alloy steel bolts, as the magnetic ring holds the probe hands-free and keeps coupling pressure uniform. Choose a Non-Magnetic Transducer (T-5043, T-4043, T-5023, T-5903) when testing non-magnetic materials (such as 300-series stainless steel, titanium, aluminum, or brass) or when the outer diameter of a magnetic collar is too wide to fit inside a counterbored recess.
Dakota Bolt Tension Monitor Transducers
$488.00 - $1,119.00
FREE Ground Shipping
About this item
Dakota Ultrasonics Transducer Cables
$94.00 - $225.00
About this item
Copyright © 2026 Abq Industrial













