$2,400.00
    warranty 1 year
    Product Description
    Checkline TI-MMX-SDL High Performance Ultrasonic Thickness Gauge
    Enhanced Data Logging with time based B Scan for a cross section view
    Range: 0.025 - 9.999" - 0.60 - 254.0 mm
    Probe Sold Separately
    Resolution:.001" (0.01 mm)
    Datalogging: YES

    The Checkline TI-MMX-SDL High Performance Data-Logging Thickness Gauge is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values. The Checkline TI-MMX-SDL High Performance Data-Logging Thickness Gauge features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use.

    Kit Contents


    • Checkline TI-MMX-SDL High Performance Ultrasonic Thickness Gauge
    • 4 oz. bottle of coupling fluid
    • 2 AA batteries
    • NIST-Traceable Calibration Certificate
    • Data Transfer Software
    • Carrying case
    • Instruction Manual

    TRANSDUCER SOLD SEPERATELY

    Click image to enlarge

    Features


    • The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
    • Built in hardware AGC gain control for through paint measurements in multi mode operation.
    • The TI-MMX-SDL High Performance Data-Logging Ultrasonic Thickness Gauge has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
    • CE Certified
    • Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
    • TheTI-MMX-SDL High Performance Data-Logging Ultrasonic Thickness Gauge also comes complete with our Windows® PC software for transferring data to and from a PC.
    • The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.
    • Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
    • Includes NIST Calibration Certificate
    • 2 Year Warranty

    Specifications


    Range in SteelPulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)
    Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.100 - 4.000 inches). Range will vary depending on the thickness of the coating.
    Resolution.001 inches (0.01mm)
    Velocity Range.0492 to .3936 in./ms
    1250 to 9999 meters/sec
    UnitsEnglish & Metric
    Measurement ModesPulse-Echo (flaws, pits)
    Echo-Echo (thru-paint)
    Transducer TypesDual Element (1 to 10 MHz).
    Memory16 megabit non-volatile ram
    Memory capacity12,000 pages with 1 reading and waveform per page
    Power SourceThree 1.5V alkaline or 1.2V NiCad AA cells
    Battery LifeTypically operates for 150 hours on alkaline and 100 hours on NiCad
    Auto Power offif idle 5 min
    Display1/8 in. VGA grayscale display 62 x 45.7mm
    KeyboardMembrane switch with twelve tactile keys
    CaseExtruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
    Operating Temperature-14° to 140°F (-10° to 60°C)
    Weight, net383 grams
    Dimensions63.5 W x 165 H x 31.5 D mm
    Warranty2 year limited
    CertificationCE Approved, Factory calibration traceable to national standards

    Related Products


    Corrosion Thickness Transducers

    • Complete line of genuine Dual-Element Ultrasonic Corrosion Thickness Transducers manufactured by Dakota for use with all Dakota and Checkline Ultrasonic Corrosion Thickness Gauges.
    Click image for more info

    Wall Thickness Gauge Accessories

    • Accurate non-destructive ultrasonic testing (NDT) relies on more than just the gauge and transducer—proper acoustic coupling, NIST-traceable sound velocity and more
    Click image for more info

    Downloads


    TI-MMX-SDL High Performance Ultrasonic Thickness Gauge - Data Sheet
    TI-MMX-SDL High Performance Ultrasonic Thickness Gauge - Instruction Manual
    TI-MMX-SDL High Performance Ultrasonic Thickness Gauge - Certificate

    F.A.Q.


    Do Checkline Ultrasonic Thickness Gauges require any training for use?

    No. Checkline Ultrasonic Thickness Gauges are designed for simple operation and feature easy-to-use instruction manuals. We also provide technical support via telephone and/or email, and a 30-day money back guarantee.

    Are Checkline Ultrasonic Thickness Gauges calibrated at the factory?

    Yes. Checkline Ultrasonic Thickness Gauges arrive fully calibrated and ready to measure.

    Do Checkline Ultrasonic Thickness Gauges include Certificate of Calibration?

    Yes. Checkline Ultrasonic Thickness Gauges Include NIST-Traceable Calibration Certificate, CE-Certified

    Can I measure the thickness of non-metallic materials like plastic and rubber with Ultrasonic Thickness Gauges?

    Yes. Checkline Ultrasonic Thickness Gauges features several preprogrammed sound velocities for common materials.

    Can Checkline Ultrasonic Thickness Gauges measure cast/ductile iron or cast aluminum?

    Yes. Checkline Ultrasonic Thickness Gauges instruments are designed to accurately measure the wall thickness of carbon steel, aluminum, stainless steel and plastic.
    ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
    MODELS
    Copyright © 2026 Abq Industrial