Tramex RMK5.1 Roof Master Kit

See More Roof Moisture Inspection Kits

Tramex RMK5.1 Roof Master Kit

See More Roof Moisture Inspection Kits
This product has been discontinued

Product Description
This product has been replaced by the Tramex RMK

Non-Destructive, deep penetration moisture testing
7” Pin-Probe for deep penetration.
Instant concrete moisture measurement
Plug-in Hygro-i ® Probe for Relative Humidity, Temperature, Dew-Point and Mixing Ratio.

The Tramex RMK5.1 Roof Master Kit allows for point-of-contact, non-destructive checking of moisture conditions in roofing and waterproofing systems up to approximately 4 inches in depth, as well as non-destructive measurement of moisture conditions in concrete decks, wood decks and ambient relative humidity & dew-point conditions. The Tramex RMK5.1 Roof Master Kit features the handheld Tramex RWS Roof and Wall Scanner non-invasive impedance scanner and the Tramex CMEX II electronic moisture meter and Hygro-i ® relative humidity probe. This kit comes in a protective, heavy-duty carrying case with die-cut foam lining.

line
Photo Gallery
line

    

line
Features of the Dec Scanner
line

  • Three ranges of sensitivity enabling the inspection of a variety of roof membranes and insulation thicknesses.
  • Ergonomic, easy-reach and easy to operate control panel.
  • Leak tracing, problem sourcing and an instantaneous and clear indication of roof condition.
  • Fast and accurate readings over large roof areas in a short time frame.
  • Faster and more user friendly than nuclear meters.

line
Features of the RWS
line

  • For non-destructive moisture evaluation of roofs, EIFS, foam insulation systems & other building envelope applications.
  • Detects, locates and traces leaks in concrete flooring.
  • To evaluate the extent of the moisture problem and help trace and pin-point its source. 
  • Multi-mode functions allowing for depth penetration and sensitivity selection.
  • Fast and easy to operate giving instant clear readings. 
  • “Hold” function facilitates ease of recording readings. 
  • Lightweight, handheld and battery operated. 
  • Inexpensive to purchase and operate compared to other non-destructive testing methods.

line
Features of the CMEX II
line

  • Measures up to 6.9% Moisture Content in Concrete.
  • Hold function “freezes” meter reading when inspecting areas where the meter face is not visible.
  • Attaches to a relative humidity Hygro-i ® probe for in-situ testing of concrete and ambient conditions.
  • 7% to 40% Moisture Content measurement in Wood using Pin-type probe attachment.

line
Kit Contents
line

  • Dec Scanner
  • RWS - Roof and Wall Scanner + telescopic handle (for use on roofs).
  • CMEX II - concrete moisture meter.
  • 1 x Hygro-i ® probe.
  • Hand held electrode with 7" insulated pins.
  • Hole Punch.
  • Infrared thermometer

line
Specifications
line

Size 19.2" x 14.9" x 5.7" (487mm x 380mm x 145mm)
Weight 9.9lbs (4.51kg)
Power 3 x 9 volt PP3
Battery Included
Measuring range - RWS  
Depth of penetration 4" (100mm)
Reference scale (NDT*) 0 to 100
Measuring range - CMEX II  
Depth of penetration in concrete (NDT*) approx. ¾" (20 mm)
Moisture content for Concrete (NDT*) 0 to 6.9 %
Comparative for Gypsum floor screed (NDT*) 0 to 10
Reference scale (NDT*) 0 to 100
Relative Humidity (RH probe) 0 to 99%
Moisture content for wood (with pin probes) 7 to 40 %
Humidity accuracy 0% to 99%RH +/- 2% @ 25°C / 77°F

* NDT - non-destructive test


line
Related Products
line

Tramex CMEX2
CMEXpert II Concrete Moisture Encounter Expert CMEX II

  • A handheld electronic moisture meter used for testing moisture conditions in concrete and other floor slabs and screeds. Versatile, precise and easy to use, theTramex CME4 allows the user to make multiple tests over a large area in the shortest possible time
related

line

Tramex RWS
Roof and Wall Scanner

  • The Tramex RWS Roof and Wall Scanner is a multi-mode non-invasive impedance scanner designed for the instant, precise and non-destructive evaluation of moisture conditions and leak tracing in roofing per ASTM D7954 and in wall systems of the building envelope
related

line

Tramex DSAL
Dec Scanner Moisture Scanner for Roofing

  • The Tramex Dec Scanner is a mobile non-destructive impedance scanner designed for the instant surveying of moisture conditions in roofing and waterproofing systems per ASTM D7954. Ideal for water leak detection in roofing materials
related

line

Tramex RIK5.1
Roof Inspection Kit

  • The Roof Inspection Kit allows for point-of-contact, non-destructive checking of moisture conditions in roofing and waterproofing systems up to approximately 4 inches in depth, as well as non-destructive measurement of moisture conditions in concrete decks, wood decks and ambient relative humidity & dew-point conditions
related


line
Downloads
line

Tramex RMK5.1 Roof Master Kit - Quick Guide
Tramex RMK5.1 Roof Master Kit - Data Sheet
Tramex CMEX2 CMEXpert II Concrete Moisture Encounter Expert CMEX II - Quick Guide
Tramex CMEX2 CMEXpert II Concrete Moisture Encounter Expert CMEX II - Instruction Manual
Tramex CMEX2 CMEXpert II Concrete Moisture Encounter Expert CMEX II - Data Sheet
Tramex RWS Roof and Wall Scanner - Quick Guide
Tramex RWS Roof and Wall Scanner - Instruction Manual
Tramex RWS Roof and Wall Scanner - Data Sheet
Tramex IRT2 Infrared Surface Thermometer - Quick Guide
Tramex DSAL Dec Scanner Moisture Scanner for Roofing - Quick Guide
Tramex DSAL Dec Scanner Moisture Scanner for Roofing - Instruction Manual
Tramex DSAL Dec Scanner Moisture Scanner for Roofing - Data Sheet
Tramex Moisture Meters - Accessories
Tramex DSAL Dec Scanner Moisture Scanner for Roofing - Learning


line

line


ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
Models Price
Discontinued