Accessories for Tramex Moisture Meters

Table of Contents


Calibration

Tramex MEP Calibration Check Box

  • Calibration Check Box for MEP
  • Order Code: CALBOXMEP

Tramex Calibration Check Plate

  • Calibration Check Plate Tramex CME5, CMEX5, CME4 and CMEX2
  • Order Code: CALCRH

Tramex Calibration Check Plugs

  • Set of calibration checks for pin-probe function of MRH3 & CMEX2
  • Order Code: PTMCALSET

Tramex MRH3 Calibration Check Box

  • Calibration Check Box for MRH3
  • Order Code: CALBOXMRH3

Tramex SMP Calibration Check Box

  • Calibration Check Box for Skipper Plus
  • Order Code: CALBOXSMP

Tramex Moisture Encounter 5 Calibration Check Box
  • Calibration Check Box for Moisture Encounter 5 - ME5
  • Order Code: CALBOXME5

Tramex SAL75 Calibration Salt Check

  • Calibration Salt Check for probes. Designed to produce a environment within the chamber which may be used to ensure the calibration of the probe.
For use with the Tramex Hygro-i2® RH probe is optimum: For use with the Tramex RHP-LW Long RH Probe & Tramex RHP-SW RH Probe: For use with the Tramex RHP-NW RH Probe & Tramex RHP-SNW RH Probe: Pack of 6 Calibration Salt Checks for Hygro-i2® probes to allow for calibration checking of 6 probes at once.
Order Code: SAL75 Order Code: SAL75S Order Code: SAL75N Order Code: SAL75-6


Pin-type Probes

Tramex Heavy-duty Pin-type Wood Probe with Cable and Pins

  • For use with CMEX5, CMEX2, MRH3 & PTM.
  • Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM)
  • Order Code: HH14TP30B (For use with CMEX5)

Tramex Hammer-Action Pin-Type Electrode

  • Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5, CMEX2, MRH3 and PTM.
  • Order Code: HA21SP52 (For use with CMEX2, MRH3 and PTM)
  • Order Code: HA21SP52B (For use with CMEX5)

Tramex Heavy-Duty Electrode with 7"Long Pins

  • Heavy-Duty Electrode with Cable and 7" (200mm) Long Pins for use with CMEX5, CMEX2, MRH3 and PTM.
  • Order Code: HH14SP200 (For use with CMEX2, MRH3 and PTM)
  • Order Code: HH14SP200B (For use with CMEX5)

Tramex Heavy-Duty Pin-Type Electrode with 3" Pins

  • Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX5, CMEX2, MRH3 and PTM.
  • Order Code: HH14SP90 (For use with CMEX2, MRH3 and PTM)
  • Order Code: HH14SP90B (For use with CMEX5)


Pins

Tramex Spare 1.5" Pins for Hammer Probe (Pack of 10)

  • Spare 1.5" Pins for Hammer Probe
  • Order Code: SP52

Tramex 3" Pins for Pin Probe HH14SP90 (Pack of 2)

  • Spare 3" Pins for Pin Probe HH14SP90
  • Order Code: SP90

Tramex Spare Pins for PTM-Professional Pin Meter

  • Pack of 10 Spare pins for PTM-Professional Pin Meter
  • Order Code: TP20

Tramex Spare 5/8" Pins for for Pin Probe HH14TP30

  • Pack of 10 spare 5/8" Pins for Pin Probe HH14TP30
  • Order Code: TG30


Hole Liners and Caps

Tramex RHHLsR - Tramex HYGRO-i2® 16mm Hole Liners (Not for ASTM F2170)

  • Hygro-i2® Hole Liners and Caps for use with Tramex Hygro-i2® relative humidity sensors. To perform BS8201, 8203, 5325 in situ RH testing of concrete floors and slabs.
  • Available in packs of 12, 25, 50, and 100
  • Order Code: RHHLsR

Tramex RHHL - Tramex HYGRO-i2® 19mm Hole Liners for ASTM F2170

  • Hygro-i2® Hole Liners and Caps for use with Tramex Hygro-i2® relative humidity sensors. To perform ASTM F2170 in situ RH testing of concrete floors and slabs.
  • Hole liners 3" long - Available in packs of 50, 100 and 200
  • Hole liners 4.72" long - Available in pack of 50
  • Order Code: RHHL


Cases

Tramex ALLPOUCH - Tramex Single Meter

Tramex Single Meter Case with Hard Shell and Zipper

For 1 of the following:

  • MEP
  • MRH3
  • CME4
  • CMEX2
Order Code: ALLPOUCH  

For 1 of the following:

  • ME5
  • CME5
  • CMEX5
Order Code: ALLPOUCH5    

For PTM2.0:

  • Order Code: ALLPOUCHP

For RWS - Roof and Wall Scanner:

  • Order Code: ALLPOUCHR

For: Feedback Ambient Datalogger:

  • Order Code: ALLPOUCH-DL/A

Tramex ALLBAG - Tramex EZ Kit Carrying Case

For 2 of the following instruments or 1 instrument & small accessories:

  • ME5
  • CME5
  • MEP
  • MRH3
  • CME4
  • CMEX2
Order Code: ALLBAG    

For 1 of the following instruments & small accessories:

  • PTM2.0
  • CMEX5
Order Code: ALLBAGP  

For the use:

  • RWS Roof and Wall Scanner
  • Small Accessories
Order Code : ALLBAGR  

Tramex MAXMULTI - Heavy Duty Carrying Case

  • Tramex Heavy Duty Kit Carrying Case with Die Cut Foam for up to 2 instruments and multiple accessories.
  • Order Code: MAXMULTI


Orther

Tramex Hole Punch

  • For creating pilot holes for long pin probes in EIFS & Roofing Systems
  • Order Code: HPW

Tramex Extension Handle for ME5, CME5 and CMEX5

  • The Extension Handle can be used with the ME5CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling.
  • Order Code: E5-HBS

Tramex Accessory Pack for Concrete Moisture Encounter 5 and 5X

  • The Accessory Pack for the Concrete Moisture Encounter 5 - CME5 and Concrete Moisture Encounter X5 - CMEX5 consists of a Calibration Check Plate, an extension handle and a handy holster pouch
  • Order Code: AP-CM

Tramex Accessory Pack for Moisture Encounter 5

  • The Accessory Pack for the Moisture Encounter 5 consists of a Calibration Check Plate, an extension handle and a handy holster pouch for the ME5
  • Order Code: AP-ME

Tramex Hygro-i2® Tool Accessory Box

  • The Hygro-i2® Accessory box contains tools needed to perform the ASTM F2170 in-situ RH test.
  • The toolbox contains: Ruler, Hygro-i2® Insertion & Retrieval Tool, Metal Brush, Hole Liner Insertion Tool and Shears, as well as a spanner for changing pins on the optional pin meter.
  • Order Code: HI-ACC

Tramex Hygro-i2® Insertion/Retrieval Tool

  • The Hygro-i2® is used to insert and retrieve the Hygro-i2® probe into the hole liner
  • Hygro-i2® Insertion Tool, length: 2.7" (65mm)
  • Order Code: HIEX
  • Hygro-i2® Insertion Tool, length: 4.8" (120mm)
  • Product Order Code: HIEXL