Low Cost Tension Monitoring System
7 Ranges up to 10 Kg
RS232 Serial output (optional) allows you to connect to a PC for datalogging
TELC Sensor plus TD-1-TE Indicator Accurately measures the running line tensions of yarns, fibers, wires, cables, films & similar process materials - continuously!
The TELC System detects "out of tolerance" conditions and immediately alerts operating personnel. This enables them to take the appropriate corrective action to maintain the highest product quality.
Additionally, the TELC Tension Sensor can be installed separately, as part of a user-supplied control-loop system.
RS232 Serial Output (optional)
Features
- Precision strain gauge accuracy of ± 1.5% or better
- User-set high & low alarm limits with relays for alerting operating personnel of "out of tolerance" conditions
- V-grooved rollers rated for speeds up to 2000 m/min are standard or, optionally, 3500 m/min (option K) or 5000 m/min (option HS)
- Analog output for recording and control purposes
- Built-in electronic damping to filter out fluctuating tension readings
- RS232 Serial output (optional) allows you to connect your sensor to our SensorView software
Specifications
| Accuracy | ±1.5% or better |
| Power Required | 12 - 24 V DC, regulated (20 mA) |
| Deflection | 0.5 mm maximum |
| Output (Standard) | 0-1 V DC |
| Output (Optional) | 0-10 V DC, 4-20 mA, RS-232 or RS-485 (Addressable)
Analog: 0 –2 V AC, linearized, app. 500 Hz
Digital: RS 232 (9600,8,N,1) |
| Frequency Response | 50 Hz |
| Outer Roller Spacing | 40-200 mm, depending upon tension range, process material and application |
| Operating Temperature | 40 to 105° F (5-40° C) |
Ranges
| Model | Range | | Model | Range |
| TELC-100 | 0-100 g | TELC-2K | 0-2 Kg |
| TELC-200 | 0-200 g | TELC-5K | 0-5 Kg |
| TELC-500 | 0-500 g | TELC-10K | 0-10 Kg |
| TELC-1K | 0-1 Kg | | |
Special Purpose Models
Tapes/Films & Tows
Type RX
- Uses 7, 10, 15, 20 or 30 mm wide cylindrical rollers for "strip" materials. Wider materials can be accommodated with other models.
| 
Heavy-Duty Model
Type 24
- Uses 30mm diameter hardened steel rollers for heavy wires, cable tire cord and similar process materials subjected to high impact loads
| Related Products
RMA
Radial Force Measuring Axle- High spring constants for the sensor permit high rotation speed ratings for the deflector roll
- High precision and excellent long-term stability
TS621
Strain Gauge Amplifier- Designed for use with a wide range of strain-gauge-based force, load and tension sensors
- 0-10VDC analog output
Downloads
