NKE Water Monitoring Instruments
NKE Water Monitoring Instruments Quality Testing Equipment plays a crucial role in assessing the safety and suitability of water, helping you to analyse water with user-friendly, portable equipment. Regularly monitoring and maintaining water quality ensures safer water, meeting both environmental and compliant water standards.
Whether you're after a multiparameter probe to monitor various water quality parameters, or a water level indicator, we will have something for you within our extensive range. We have an excellent selection of multiparameter water monitoring probes suitable for a range of applications. They each allow you to add extra sensors. All probes in our range are constructed from tough marine grade aluminium that has been hard anodised. This makes them suitable for use in both fresh and salt waters.
We also stock many other products to help you with water analysis, including data convertors and temperature loggers. You can buy individual probes, or opt for full water monitoring kits. There is a choice of both basic and advanced packages, allowing you to find and buy the more suitable tools for your projects.
NKE Aquaprobe-2000 Water Monitoring Probe
NKE Aquaprobe-5000 Water Monitoring Probe
NKE Aquaprobe-6000 Water Monitoring Probe
- The AP-6000 features 4 Auxiliary sockets to allow you to add further sensors to the probe
- The probe can be used with a variety of cable lengths via the AquaConn Connectors
- Cables available in 3, 10, 20 and 30m lengths as standard
View More Details
NKE Aquaprobe-7000 Water Monitoring Probe
- The central cleaning arm of the AP-7000 consists of a rotating set of brushes that clean all of the connected sensors, including the EC sensor located on the side of the optical DO probe
- As part of the routine maintenance of the AP-7000 the cleaning brushes need to be replaced. This is a very quick job that can be performed as the probe is cleaned prior to calibration. Once the cleaning arm is slid out, the brushes can be removed and replaced as shown
View More Details
NKE AM-200 GPS Aquameter Handheld Water Quality Meter
- Built in GPS receiver to enable location tagging with every data set, view data in Google Earth
- Display of all the parameters being measured; scroll left and right to view
- Record your data set at the touch of a single button, press M+ to record full data set including all parameters, GPS data and calibration data
View More Details
NKE Aquaprobe AP-2000 Package with GPS Aquameter
NKE Aquaprobe AP-5000 Package with GPS Aquameter
NKE Aquaprobe AP-6000 Package with GPS Aquameter
- The AP-6000 features 4 Auxiliary sockets to allow you to add further sensors to the probe
- The probe can be used with a variety of cable lengths via the AquaConn Connectors
- Cables available in 3, 10, 20 and 30m lengths as standard
View More Details
NKE Aquaprobe AP-7000 Package with GPS Aquameter
- The central cleaning arm of the AP-7000 consists of a rotating set of brushes that clean all of the connected sensors, including the EC sensor located on the side of the optical DO probe
- As part of the routine maintenance of the AP-7000 the cleaning brushes need to be replaced. This is a very quick job that can be performed as the probe is cleaned prior to calibration. Once the cleaning arm is slid out, the brushes can be removed and replaced as shown
View More Details
NKE Aquaprobe AP-2000 Package with BlueLink Bluetooth Device
NKE Aquaprobe AP-5000 Package with BlueLink Bluetooth Device
NKE Aquaprobe AP-6000 Package with BlueLink Bluetooth Device
- The AP-6000 features 4 Auxiliary sockets to allow you to add further sensors to the probe
- The probe can be used with a variety of cable lengths via the AquaConn Connectors
- Cables available in 3, 10, 20 and 30m lengths as standard
View More Details
NKE Aquaprobe AP-7000 Package with BlueLink Bluetooth Device
- The central cleaning arm of the AP-7000 consists of a rotating set of brushes that clean all of the connected sensors, including the EC sensor located on the side of the optical DO probe
- As part of the routine maintenance of the AP-7000 the cleaning brushes need to be replaced. This is a very quick job that can be performed as the probe is cleaned prior to calibration. Once the cleaning arm is slid out, the brushes can be removed and replaced as shown
View More Details
NKE Aquaread Combined pH / ORP Electrode
- User replaceable sensor
- pH Measurement range: 0-14pH
- Simple 3-point calibration at pH4,7 and 10
View More Details
NKE Aquaread Ammonium Electrode
- Solid state ISE sensor
- Simple to install on a wide range of Aquaprobes
- Sensor life of around 6 months depending on usage
- Long storage shelf life
View More Details
NKE Aquaread Turbidity Optical Electrode
- Dense sapphire lenses are used on our turbidity sensor for their high clarity and scratch resistance
- Turbidity Measurement range: 0-4000 NTU
- 3-point calibration at 0, 20 and 1000NTU
View More Details
NKE CPHYLL Aquaread Chlorophyll Electrode
- Dense sapphire lenses are used on our chlorophyll sensor for their high clarity and scratch resistance
- Measurement range: 0 - 500µg/l
- Resolution: 0.01µg/l
View More Details
NKE BGA Aquaread Blue-Green Algae Electrode
- Dense sapphire lenses are used on our BGA sensor for their high clarity and scratch resistance
- Measurement range BGA-PE: 0 – 200,000 cells/ml
- Measurement range BGA-PC: 0 – 300,000 cells/ml
View More Details
NKE CHL Aquaread Chloride Electrode
- Solid state ISE sensor
- Chloride Measurement range 0 – 20,000mg/l
- Chloride Resolution: two auto range scales: 0.00 – 99.9mg/l, 100.0 – 20,000mg/l
View More Details
NKE FLU Aquaread Fluoride Electrode
- Fluoride Measurement range 0 – 1,000mg/l
- Fluoride Resolution: two auto range scales: 0.00 – 99.9mg/l, 100.0 – 999.9mg/l
- Fluoride Accuracy: +/- 10% of reading
View More Details
NKE NIT Aquaread Nitrate Electrode
- Nitrate Measurement range 0 – 30,000mg/l
- Nitrate Resolution: two auto range scales: 0.00 – 99.9mg/l, 100.0 – 29,999.9mg/l
- Nitrate Accuracy: +/- 10% of reading
View More Details
NKE CAL Aquaread Calcium Electrode
- Calcium Measurement range 0 – 2,000mg/l
- Calcium Resolution: two auto range scales: 0.00 – 99.9mg/l, 100.0 – 1,999.9mg/l
- Calcium Accuracy: +/- 10% of reading
View More Details
NKE RHOD Aquaread Rhodamine WT Dye Optical Electrode
- Dense sapphire lenses are used on our rhodamine sensor for their high clarity and scratch resistance
- Measurement range 0 – 500µg/l
- Resolution: 0.01µg/l
View More Details
NKE FSCEIN Aquaread Dye Optical Electrode
- Dense sapphire lenses are used on our fluorescein sensor for their high clarity and scratch resistance
- Measurement range 0 – 500µg/l
- Resolution: 0.01µg/l
View More Details
NKE REFOIL Aquaread Refined Oils (Hydrocarbons) Optical Electrode
- Dense sapphire lenses are used on our refined oil sensor for their high clarity and scratch resistance
- Specialised deep UV LED is used to excite the refined oil
- Measurement range 0 – 10,000µg/l
View More Details
NKS BlueLink-Probe Bluetooth Device
- The Bluelink bluetooth water quality monitoring adapter is made from aluminium and carbon bre and houses a rechargeable battery
- The unit also features a barometric pressure sensor for live compensations of the dissolved oxygen and depth measurements
- The internal battery within Bluelink is rechargeable
View More Details
NKE AquaLogger Data Logger
- Rugged construction for a solid deployment
- Houses an air pressure sensor for pressure compensation
- Large memory to capture 15,000 full data sets, including calibration data
View More Details
NKE BlackBox Data Converter
- Compatible with all Aquaprobes and AquaPlus probes
- Integral barometric pressure sensor for depth and DO correction
- Able to output data from any Aquaread water monitoring sensor; standard, optical or ISE types
View More Details



































































