Tramex WDMK Water Damage Restoration Master Kit

See More Tramex Moisture Meters

Tramex WDMK Water Damage Restoration Master Kit

See More Tramex Moisture Meters
Price:
$2,835.00
    warrenty

    Product Description
    Tramex WDMK Water Damage Restoration Master Kit
    Industry: Water Damage Restoration

    The Tramex WDMK Water Damage Restoration Master Kit is ideal for moisture and relative humidity testing and monitoring of buildings and building materials. Featuring the Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter for dual-depth, non-invasive testing of moisture conditions in drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. The Tramex CMEX5 Concrete Moisture Encounter X5 for non-destructive quantitative and comparative testing of concrete and ambient conditions. The CMEX5 incorporates a plug-in heavy-duty pin-probe measures Moisture Content in wood or WME in other building materials. The CMEX5 also incorporates plug-in RH probes for in-situ testing of concrete, building materials, structures and air spaces. These probes can be used with the Feedback Datalogger to give live readings and time logs of relative humidity, temperature and dew point in the environment and in materials and air spaces. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the CMEX5 hygrometer. The Water Damage Restoration Master Kit comes with an extension handle in a protective heavy-duty carrying case with die-cut foam lining. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places.


    line
    Kit Contents
    line


    line
    Specifications
    line

    Kit:

    Size20.5” x 18.9” x 5.9” (52cm x 48cm x 15cm)
    Weight10.8 lbs (4.9kg)
    Power5 x AA batteries, 1 x 9 volt PP3 battery


    Tramex CMEX5 Concrete Moisture Encounter X5:

    Moisture content for Concrete0 → 6.9 %
    Comparative for Gypsum floor screed0 → 12
    CM Equiv Anhydrite/Concrete0→2.7 / 0→ 4.3
    Reference scale0 → 100
    Relative Humidity0 → 99% (with optional Hygro-i2 ® probe)
    Humidity accuracy0% → 99%RH ± 2% @ 25°C / 77°F
    Moisture content for wood5→ 30 % (with optional wood pin probes)
    ConstructionABS Body
    Power2 x AALR6 ALKALINE (included)
    DisplayDigital
    Depth of penetration in concreteapprox. ¾" (20mm)


    Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter:

    Size6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm)
    Weight 9.5oz (270g)
    ConstructionABS Body
    Power2 x AALR6 ALKALINE (included)
    DisplayAnalogue
    Depth of penetrationShallow signal: up to 0.40" (10mm)
    Deep signalup to 1.25" (30mm)
    Wood Moisture Content5 to 30%
    Reference scale for building materials0 to 100


    Tramex DL-RHTX Feedback DataLogger:

    Size3.94" x 3.54" x 1.38" (100mm x 90mm x35mm)
    Weight3.53oz (100g)
    Construction ABS enclosure Power1 x AA type battery 1.5 Volt
    Memory100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature)
    Logging RateLogger interval adjustable between 5 minutes and 1 hour
    Transmission RangeUp to 165ft (50m) line-of-sight Bluetooth: BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising Included: Wall Mounting and Tripod Stand


    Tramex RHIE2Hygro-I Electronic Interface Cable

    Range

    0 to 100% RH
    Accuracy±1.5%RH Range 0% to 80%RH ±2.0%RH Range 80% to 99%RH (@ 77°F (25°C))
    Resolution0.1% over the complete range
    Drift<0.25%RH per year


    Tramex IRT2 Infrared Surface Thermometer

    Temperature range

    -58°F ~ 1202°F (-50 to 650 °C) 
    Distance to Spot ratioD:S = 12:1
    Display resolution0.1 °F(0.1°C)   <1000 1°C   >1000

    Accuracy for targets

    Assumes ambient operating temperature of  73 to 77°F (23 to 25 °C) -58°F ~ 68°F (-50 ~ 20°C)  ±4.5°F (2.5°C) 68°F ~572°F (20°C ~300°C)  ±1.0% ± 1.8°F (1.0°C) 572°F ~ 1202°F (300°C ~650°C) ±1.5%

    Repeatability

    -58~68°F (-50~20°C)  :  ± 2.3°F (1.3°C) 68~1202°F (20~650°C) : ±0.5% or ±0.9°F (0.5°C)

    Response time

    150ms

    Spectral response

    8~14um

    Emissivity

    Digitally adjustable from 0.10 to 1.0

    Over range indication

    LCD will show "----"

    Polarity: Automatic (no indication for positive polarity)

    Minus (-) sign for negative polarity

    Diode laser output

    <1mW,Wavelength 630~670nm, Class 2 laser product

    Operating temp.

    32 to 122°F ( 0 to 50°C)

    Storage temp.

    14 to 140°F (–10 to 60°C)

    Relative humidity

    10%~90%RH operating, <80%RH storage

    Power supply

    9V battery, NEDA 1604A or IEC 6LR61, or equivalent

    Safety"CE" Comply with EMC


    line
    Related Products
    line

    Tramex CMEX5 Concrete Moisture Encounter X5

    • 4 Modes of Measurement
    • 8 Simple Membrane Keypad Controls
    • Display Digital
    related

    line

    Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter

    • 5 Ranges of sensitivity: Wood & Timber / Shallow Depth / Drywall & Roofing / Plaster & Tile / Masonry
    • Dual-Depth penetration allows for comparative of surface and core moisture and elimination of substrate influence on the testing of coverings
    related

    line

    Tramex DL-RHTX Feedback DataLogger

    • Bluetooth BLE enabled for use with mobile devices
    • Up to 100,000 data point entries. Instant set up and start modes
    • Precise Ambient Relative Humidity and Temperature logging
    related

    line

    Tramex HH14TP30B Heavy-duty Pin-type Wood Probe with Cable and Pins

    • For use with CMEX5, CMEX2, MRH3 & PTM.
    • Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM)
    • Order Code: HH14TP30B (For use with CMEX5)
    related

    line

    Tramex CALCRH Calibration Check for CME5, CMEX5

    • The Tramex CALCRH is a calibration check plate used to easily verify if moisture meters yield proper moisture readings, or if or needs to be sent to a calibration lab.

    related

    line

    Tramex SAL75 Calibration Salt Check

    • Calibration Salt Check for Tramex Hygro-i2 Relative Humidity Probe. The calibration salt check allows for regular calibration checks. Designed to produce a 75% RH environment within the chamber which may be used to ensure the calibration of the Hygro-i2®RH probe is optimum
    • Order Code: SAL75, for Tramex RHP-LW Long RH Probe, Tramex RHP-SW Relative Humidity Probes
    • Order Code: SAL75S, for Tramex RHP-NW Narrow Wand Relative Humidity Probe, Tramex RHP-SW Relative Humidity Probes
    • Order Code: SAL75N for Tramex RHP-NW Narrow Wand Relative Humidity Probe, Tramex RHP-SNW Short Narrow Wand Relative Humidity Probe
    • Order Code: SAL75-6 for Tramex Hygro-i2 Relative Humidity Probe for calibration checking of 6 probes at once.
    related

    line

    Tramex IRT2 Infrared Surface Thermometer

    • his hand held, infrared surface thermometer features a laser target pointer to gain instant readings on almost any surface from a distance.
    related

    line

    Tramex Extension Handle for ME5, CME5 and CMEX5 

    • The Extension Handle can be used with the ME5CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling.
    • Order Code: E5-HBS
    related

    line


    Tramex CALBOXME5 Moisture Encounter 5 Calibration Check Box

    • Calibration Check Box for Moisture Encounter 5 - ME5
    related

    line


    Tramex HIPP Hygro-i2 Relative Humidity Probe

    • Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test
    related

    line


    Tramex RHIE2 Electronic Interface Cable

    • Electronic Interface Cable for Tramex Hygro-i Probes
    • Fast Acclimation and Temperature response time
    • Proven robustness, Durable and Reusable
    related

    line


    Tramex Hammer-Action Pin-Type Electrode

    • Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5, MRH3.
    • Order Code: HA21SP52 (For use with MRH3)
    • Order Code: HA21SP52B (For use with CMEX5)
    related


    line
    Downloads
    line

    Tramex WDIK Water Damage Restoration Master Kit - Data Sheet
    Tramex CMEX5 Concrete Moisture Encounter X5 - Data Sheet
    Tramex CMEX5 Concrete Moisture Encounter X5 - Instruction Manual
    Tramex ME5 Moisture Encounter - Quick Guide
    Tramex ME5 Moisture Encounter - Instruction Manual
    Tramex ME5 Moisture Encounter - Data Sheet
    Tramex DL-RHTX Feedback DataLogger - Data Sheet
    Tramex IRT2 Infrared Surface Thermometer - Data Sheet
    Tramex Meters App - Getting Started & Moisture Mapping
    Tramex Meters App - Visualizing, Photographing and Geo-tagging
    Accessories for Tramex Moisture Meters - Online Catalog

    ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
    Models Price
    $2,835.00