Name: Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches
Brand: Imada
SKU: 126

This product has been replaced by the DI-4B-25

Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches

3 ranges up to 130 lb-in

Units of measure: lb-in, oz-in, kg-cm, N-cm and N-m (selectable)

USB Data Output

The Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches measure the peak torque of non-impact electric/air drivers. Under tightened bolts and screws do not generate sufficient clamp force and can lead to loosening and assembly failure. Over tightening, past the yield point, permanently deforms the screw joint and can also lead to failure which is why proper tightening torque is so important. Manual torque wrenches can also be calibrated.

Unique Smart Adapters
The unique Smart Adapters simulate the screw joint and do not need to be backed-off after each test. This features increases testing efficiency and ease of use by reducing the time between each test. Results can be downloaded through the USB port for analysis with data acquisition software. The Series i torque calibrators are compatible with SW-1SV-USB software.

The peak torque or peak down torque in breakaway tests is captured automatically. The Series i torque calibrator displays Max, Min and Avg statistics. The tester can read values in lbf-in, kgf-cm, N-cm and N-m.

What’s Included
All series i torque testers are sold in kit form complete with tester, hard carrying case, 2 driver adapters and AC charger/adapter. All testers come with a 3-Point Certificate traceable to NIST. ISO Certificates are available at an additional charge.

Do not use with impact or air tools (Ask for DI-1M impact wrench torque tester).

Kit Contents

Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches
2 smart adapters
AC adapter
NIST-Traceable Calibration certificate
Instruction manual
Foam fitted aluminum carrying case

Click image to enlarge

Features

Capacities up to 174 lb-in / 20 Nm
Selectable units lbf-in, Kgf-cm, N-cm and N-m
Programmable High/Low setpoints with audible beep for uniform torque tightening or GO/NO GO testing
2 – driver adapters included: i-8 & i-80 come with smart adapters, CD-150 & DI-11 come with spring adapters
Peak, Real Time and Peak Down measuring modes (selectable)
Measure both clockwise and counterclockwise
USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
Statistics: number of data, Max, Min, Avg
Heavy-duty metal construction
Runs on internal NiCad batteries or AC adapter
3/8 drive for socket wrenches

Force Ranges

Model

Capacity

Resolution

i-8

7 lb-in
8 kg-cm
78.6 N-cm

0.001 lb-in
0.001 kg-cm
0.01 N-cm

i-80

70 lb-in
80 kg-cm
7.86 Nm

0.01 lb-in
0.01 Kg-cm
0.001 Nm

CD-150M

130 lb-in
150 kg-cm
15 Nm

0.1 lb-in
0.1 Kg-cm
0.01 Nm

DI-11

174 lb-in
200 kg-cm
20 Nm

0.1 lb-in
0.1 Kg-cm
0.01 Nm

Accuracy: ±0.5% F.S., ±1 LSD

Adapters

Specifications – Standard Driver Adapters (2 included)

	i-8		i-80
Adapter	Smart Adapters
Model	OW-025E	OW-10E	OW-20E	OW-60E
Range	2 lb-in	9 lb-in	18 lb-in	53 lb-in
Mechanical life	10,000 hrs.	8,000 hrs.	5,000 hrs.
Screw on top	6-32	6-32	8-32	1/4-20
Plug to socket	3/8" square x 5/32" (20 mm square x 4 mm)

	CD-150M		DI-11
Adapter	Spring Adapters
Model	SJ-50	SJ-100	SJ-50	SJ-200
Range	8 ~ 50 lb-in	50 ~ 130 lb-in	8 ~ 50 lb-in	50 ~ 175 lb-in
Mechanical life	2500 times
Screw on top	5/16-18	3/8-16	5/16-18	3/8-16
Plug to socket	3/8" square x 5/32" (20 mm square x 4 mm)