PCWI High Voltage Direct Current Crest Meter, Jeep Meter or Volt Meter
Calibration Reference Device for the Compact range of Porosity Detectors
Can be used in accordance with ASTM G62, ASTM D5162, ASTM D4787, NACE RP0274, NACE SP0490, NACE SP0188, ANSI/AWWA C213, ANSI/AWWA C214, ISO 2746
New Part. No. DCCREST - Old Part No. 1095
Measuring Range: 0 to 30kV
The PCWI DCCREST High Voltage Direct Current (DC) Crest Meter is used to verify output voltage and the calibration of DC Porosity Detectors and Holiday Detectors.
Kit Contents
- PCWI DCCREST High Voltage Pulse Crest Meter
- Carry Case
- Instruction Manual
- One (1) year warranty
Features
- Used for checking & calibrating Porosity Detector output voltage
- Compact, lightweight hand-held unit
- Integral probe
- Conformance Certificate
Applications
- Verification of output voltage and set voltage of detectors when a load is applied to the probe.
- To ensure accuracy and to enable voltage adjustment (if necessary).
Specifications
| Range | 0 to 30kV |
| Resolution | 10V (0 to 20kV) | 100V (0 to 30kV) |
| Earth lead | Separate |
| Dimensions | 14,9" x 1,4" (380 x 80mm) |
| Weight | 11 oz (300g) |
Operation and Testing Procedure
Testing the output of the detector, and verifying the voltage on the visual display.
- Setup Detector for test.
- Switch on Detector, and set voltage.
- Connect Crest Meter into system.
- Set the Detector's voltage using the
- Crest Meter's display
| Downloads
