Large diameter rollers and 100 mm spacing between outer rollers minimize damage to optic fibers and similar materials that cannot withstand a small bending radius.
Finger Support: We recommend mounting a finger support for higher tension ranges
Note:This model does not include a material thickness compensator
Kit Contents
- FX2 Optic Fiber Tension Meter
- Instruction manual
- Carrying case
Features
- NIST-Traceable Calibration Certification OPTIONAL
- Standard roller material is Aluminum, Plastic is optional
- Lightweight, low inertia 32 mm diameter rollers for speeds up to 4000 m/min (K).
- The analog display shows changing and fluctuating tensions fast and enables an optimal process adjustment
- Large bending radius assures gentle handling of the material being measured
- Special finger support located on the rear side reduces the effort to move the outer roller assembly
- Built-in mounting holes permit fixed installation for continuous tension measurement
- Special guides on the bracket assembly permit easy material acquisition
- Warranty: 1-Year
- Made in Germany
Specifications
| Accuracy | ±1 % full scale or ±1 graduation on scale |
| Diameter of Scale | 41 mm |
| Temperature Range | 10 - 45 ºC |
| Air humidity | 85 % RH, max |
| Housing material | Die-cast aluminium |
| Housing Dimensions | 188 x 85 x 45 mm (LxWxH) |
Ranges
| Model | Range | Measuring Width Head |
| FX2-50 | 5-50g | 140mm |
| FX2-120 | 10-120g | 140mm |
| FX2-200 | 20-200g | 140mm |
| FX2-400 | 10-400g | 140mm |
| FX2-1000 | 20-1000g | 140mm |
Guide Rollers
| Order Code | Line Speed Vmax ...m/min | Roller Material |
| Standard | 4000 | Hardcoated aluminium |
| Code -PL | 4000 | Plastic (PVC) Red |
Downloads
