ElektroPhysik 85-804-0600 MiniTest 420 Ultrasonic Thickness Gauge Complete kit including 5 Mhz probe - TRA/005420

See More Ultrasonic Thickness Gauges

ElektroPhysik 85-804-0600 MiniTest 420 Ultrasonic Thickness Gauge Complete kit including 5 Mhz probe - TRA/005420

See More Ultrasonic Thickness Gauges
Price:
$1,545.00
    warrenty

    Product Description
    ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge
    Uses Pulse-Echo Principle of Ultrasonics
    Basic Ultrasonic Thickness Gauge with adjustable calibration for a wide range of materials
    Several Transducers are optionally available including one for High Temperature materials (350 °C)
    Automatic identification of probes

    The ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge is a basic straight forward ultrasonic thickness testing gauge for simple quick measurements. The MiniTest 420 incorporates a calibration block for zero adjustments and quick calibration.

    Sturdy and accurate ultrasonic thickness gauge based on the ultrasonic pulse run-time method.

    6 ultrasonic probes with frequencies ranging between 2 and 10 MHz in different designs offer a broad spectrum of applications and thickness measurements ranging from 0.65 mm to 500 mm. A high temperature ultrasonic probe is also available, designed for measurement of hot materials with temperatures of up to 350 °C.

    Uninterrupted scanning of a part for thinning is possible at the minimum mode.


    line
    Features
    line

    • Includes Factory "Works" Calibration Certificate.
    • NIST Traceable Calibration Certificate optionally available at additional cost
    • Suitable for measurement of various materials including steel, stainless steel, aluminum, glass, plastics (PS/PE)
    • Adjustable units inch/mm
    • Resolution of 0.001" (0.01 mm)
    • Automatic identification of probes
    • Uses Pulse-Echo Principle of Ultrasonics
    • Sensitivity can be set to "Auto" or "Manual"
    • Several Transducers are optionally available including one for High Temperature materials (350 °C)
    • Warranty 1-Year
    • Made in Germany


    line
    Specifications
    line

    Measuring Range Pulse Echo: With standard transducer U5.0: 0.8 - 350 mm (0.03 - 13.8")
    (For ranges of other transducers see table)
    Resolution 0.01mm (0 - 99.9 mm), 0.1(> 100 mm)
    Display 128 x 64 pixels with backlight
    Velocity Range 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec
    Probe Standard transducer U5.0: 8mm (0.31") - (For diameter of other transducers see table)
    Operation Temperature -20 to 50°C (-4 to 122°F)
    Battery Type Two AA batteries
    Battery Life more than 80 hours under continuous operation
    Weight approx. 6.70 oz (190 g)
    Size 5.1 x 2.9 x 0.94" - (130 X 73 X 24 mm)
    Accessories Included U5.0 5 MHz standard transducer, Operating instructions, two 1.5V AA batteries, Plastic carrying case, Coupling liquid (200 ml),
    Housing Protection IP40


    line
    Range
    line

    Type Diameter Frequency Measuring Range
    U5.0 8 mm | 0.31" 5.0 MHz 0.8 - 350 mm | 0.031 - 13.8"
    U2.0 12 mm | 0.47" 2.0 MHz 2.0 - 500 mm | 0.079 - 19.7"
    U7.5 6 mm | 0.24" 7.5 MHz 0.65 - 50 mm | 0.026 - 1.97"
    U10.0 4 mm | 0.16" 10.0 MHz 0.65 - 20 mm | 0.026 - 0.79"
    U5.0HT 13 mm | 0.51" 5.0 MHz 3.0 - 200 mm | 0.12 - 7.87"

    line

    Type Material Temperature Application
    U5.0 -12 to 60 °C on flat surfaces or huge curvature radii
    U2.0 -12 to 60 °C rough surfaces such as cast iron
    U7.5 -12 to 60 °C thin w all thickness and small curvature radii
    U10.0 -12 to 60 °C small tube diameters
    U5.0HT -12 to 350 °C for temperatures up to 350 °C


    line
    Downloads
    line

    ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge - Data Sheet
    ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge - Instruction Manual

    F.A.Q.

    Do Ultrasonic Thickness Gauges require any training for use?

    No. Ultrasonic Thickness Gauges are designed for simple operation and feature easy-to-use instruction manuals. We also provide technical support via telephone and/or email, and a 30-day money back guarantee.

    Are Ultrasonic Thickness Gauges calibrated at the factory?

    Yes. Ultrasonic Thickness Gauges arrive fully calibrated and ready to measure.

    Do Ultrasonic Thickness Gauges include Certificate of Calibration?

    Yes. Ultrasonic Thickness Gauges include NIST-Traceable Calibration Certificate, CE-Certified

    Can I measure the thickness of non-metallic materials like plastic and rubber with Ultrasonic Thickness Gauges?

    Yes! Ultrasonic Thickness Gauges feature several preprogrammed sound velocities for common materials.

    Can Ultrasonic Thickness Gauges measure cast/ductile iron or cast aluminum?

    Yes. Ultrasonic Thickness Gauges instruments are designed to accurately measure the wall thickness of carbon steel, aluminum, stainless steel and plastic.
    ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
    Models Price
    $1,545.00
    Recommended Accessories PRICE
    $100.00
    $315.00
    $365.00
    $315.00
    $620.00
    $530.00