This product has been discontinued
Replaced by Dakota Ultrasonics ZX-3
Product Description
This product has been replaced by the Dakota Ultrasonics ZX-3
Manual Velocity Adjustment or Select Material from 8 Presets
Resolution: .001" (0.01 mm)
Includes NIST-Traceable Calibration Certificate, CE-Certified
5-Year Warranty, Made in USA
Datalogging: NO

Total Measuring Range (depends on material and transducer/probe type)
0.025 - 36.000 inches
0.63 - 914.4 mm		Measuring Range on Steel (with standard T-102-2000 probe)
0.040 - 8.00 inches
0.60 - 199.9 mm 

The Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 / Z-301-0003 allows the operator to select from 8 preset materials as well as program 2 custom material velocities allowing the user to tune the calibration to be optimized for a specific type of material. The programmed velocity can be locked to prevent accidental adjustment. The preset materials are as follows:

  1. Steel 4340 .2330 n/μs / 5918 m/sec
  2. Stainless 303 .2230 / 5664
  3. Aluminum 2024 .2510 / 6375
  4. Cast Iron .1800 / 4572
  5. Plexiglass .1060 / 2692
  1. PVC .0940 / 2388
  2. Polystyrene .0920 / 2337
  3. Polyurethane .0700 / 1778
  4. Custom
  5. Custom

Kit Contents

  • Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 / Z-301-0003
  • Probe T-102-2000
  • 4 oz. bottle of coupling fluid
  • 2 AA batteries
  • NIST Traceable Calibration Certificate
  • Carrying case
  • Instruction Manual
Click image to enlarge

Features

  • Resolution of 0.001 inch (0.01 mm)
  • The Transducer (probe) is waterproof and can be submerged in shallow water
  • Special-purpose probes are offered for a variety of applications (1 to 10 MHz)
  • Switch-selected units for inches or mm
  • The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) 
    to provide trouble-free operation under the toughest field conditions
  • For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available
  • High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C)
  • LCD shows Thickness Value, Velocity Setting, Stability Indicator, Battery Indicator and units
  • Acoustic Velocity (calibration) is manually adjusted via the keypad
  • 5 Year Warranty, CE-Certified and Made in USA
  • Operates on two (2) AA Batteries - 45 hours continuous operation
  • Selectable Backlight ON/OFF/AUTO
  • Includes NIST Traceable Calibration Certificate

Specifications

Total Measuring Range (Steel)0.025 - 36.000 inches
0.63 - 914.4 mm
(depends on material and transducer/probe type)
Measuring Range (Steel)0.040-8.000 inches
1.00-199.9 mm
(with standard transducer T-102-2000)
Resolution0.004 inch (0.1 mm)
Measuring ModePulse-Echo (P-E)
Velocity Range0.0120 to .7300 in/μs (305 to 18,542 m/sec)
Probe (Standard)1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300
Probes (optional)1 to 10 MHz, 3/16" up to 1 inch (custom probes available)
Probe WearfacePEEK (Polyethylethylkytone)
Cable1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors
LCD DisplayMulti-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes
Display BacklightBacklight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options
Display Update Rate10 Hz (10 updates/sec)
Temp. LimitsAmbient: -30 to 75° C (-22 to 167° F)
Material: -20 to 100° C (0 to 200° F)
High temperature probes available
Battery Type2x AA batteries (rechargeable batteries can be used)
Battery Life45 hours continuous use
Weight308 grams (11 ounces)
Dimensions63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25")
AccessoriesProbe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
HousingExtruded aluminum body with nickel-plated aluminum end caps (gasket sealed)
Housing RatingIP65
CertificationsNIST Traceable and MIL-STD-45662A
KeypadSealed membrane that is resistant to both water and petroleum products
Seven or eight tactile-feedback keys
Pulse Repetition Frequency (PRF)200 Hz (200 pulses/sec)
WarrantyGauge: 5 Years
Probes: 90 Days

Measuring Limits

Minimum Radius for Convex Surfaces0.350" (8.89 mm)
Minimum Radius for Concave Surfaces3" (76.2 mm)
Minimum Headroom1" (25.0 mm)
Minimum Sample Diameter0.150" (3.8 mm)
Minimum Substrate Thickness - Fna
Minimum Substrate Thickness - NFena

Related Products

TI-25-UW-50
50 Foot Underwater Probe / Cable Assembly

  • 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors
related
Click image for more info

V-Block
Ultrasonic Transducer Holder

related
Click image for more info

Downloads

Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 / Z-301-0003 - Instruction Manual (NEW MODEL)
Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 / Z-301-0003 - Data Sheet
Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 - Instruction Manual (OLD MODEL)
Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List

F.A.Q.

Do Dakota Ultrasonics Thickness Gauges require any training for use?

 No. Dakota Ultrasonics Thickness Gauges are designed for simple operation and feature easy-to-use instruction manuals. We also provide technical support via telephone and/or email, and a 30-day money back guarantee.

Are Dakota Ultrasonics Thickness Gauges calibrated at the factory?

 Yes. Dakota Ultrasonics Thickness Gauges arrive fully calibrated and ready to measure.

Do Dakota Ultrasonics Thickness Gauges include Certificate of Calibration?

 Yes. Dakota Ultrasonic Thickness Gauges includes NIST-Traceable Calibration Certificate, CE-Certified

Can I measure the thickness of non-metallic materials like plastic and rubber with Dakota Ultrasonics Thickness Gauges?

 Yes. Dakota Ultrasonics Thickness Gauges features several preprogrammed sound velocities for common materials.

Can Dakota Ultrasonics Thickness Gauges measure cast/ductile iron or cast aluminum?

 Yes. Dakota Ultrasonics Thickness Gauges instruments are designed to accurately measure the wall thickness of carbon steel, aluminum, stainless steel and plastic.
ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
MODELS
Discontinued
ACCESSORIES
$419.00
$125.00
$157.00
$219.00
$38.00
$44.00
$463.00
$419.00
$432.00
$432.00
$432.00
$513.00
$488.00
$525.00
$607.00
View Cart
Copyright © 2025 Abq Industrial