Buy Quality TI-25DL Data Logging Ultrasonic Thickness Gauge

Price: $1,695.00 to $1,795.00

General purpose gauge measures a variety of materials with datalogging

Range:
0.025 - 6.00 inches
0.60 - 150.0 mm

Resolution: .001" (0.01mm)

Datalogging: YES

TI-25DL Data Logging Ultrasonic Thickness Gauge

Measuring Range in Steel
0.025 - 6.00 inches
0.60 - 150.0 mm

The TI-25DL Data Logging Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!

TI-25DL Data Logging Ultrasonic Thickness Gages incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.

The gauge can be used in a Single Thickness Reading mode or in two alternative modes, the Scan mode and the and the Differential mode. The Scan modes permits the user to "drag" the probe over a large measuring area where the minimum thickness encountered during the scan will be displayed. The Differential mode displays the difference ("+" or "-") from a set "nominal" value

Features of the TI-25DL Data Logging Wall Thickness Gauge

Resolution of 0.001" (0.01 mm)

Selectable units of inch or mm

Large, backlit LCD display retains last reading

RS-232C Serial output for downloading stored data to a printer or computer

Memory for 1000 data points in up to 10 batches

Special-purpose probes are offered for a variety of applications

Windows compatible data transfer program supplied at no additional cost.

CE Certified

Includes NIST Calibration Certificate

Typical Applications of a TI-25DL Data Logging Ultrasonic Thickness Gauge
typical

Optional Accessories for the TI-25DL Data Logging Ultrasonic Thickness Gauge


NIST-Traceable Steel Test Block 3 Sizes Available
Precision Machined and Finished Includes NIST Report and Test Data

___________________________________________


Uncertified Steel Test Block For Ultrasonic Gages
For convenient confirmation of thickness gauge calibration

___________________________________________


TICC-M Protective Holder for Ultrasonic Gages
Constructed from heavy duty Cordura Nylon Built-in belt loop

___________________________________________


CF12 Coupling Fluid
Used to create an ultrasonic coupling between the probe and material to be measured 12oz Bottle

___________________________________________


TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly
50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors.

___________________________________________


V-Block Transducer Holder
The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.

___________________________________________


P-25DL Portable Printer for TI-25DL
Small, portable and easy to use Prints statistical data from the TI-25DL Ultrasonic Wall Thickness Gauge

Measuring Limits of the TI-25DL Data Logging Ultrasonic Thickness Gauge

	Minimum Radius for Convex Surfaces	0.350" (8.89 mm)
	Minimum Radius for Concave Surfaces	3" (76.2 mm)
	Minimum Headroom	1" (25.0 mm)
	Minimum Sample Diameter	0.150" (3.8 mm)
	Minimum Substrate Thickness - F	na
	Minimum Substrate Thickness - NFe	na

Specifications of the TI-25DL Data Logging Ultrasonic Thickness Gauge

Range in Steel	0.025-6.00" (0.60-150.0 mm)
Resolution	.001" (0.01 mm)
Velocity Range	6,500-33,000 ft./sec (2000-10,000 m/sec.)
Display	4½ - Digit, 0.5" Backlit LCD
Probe	7.5 MHz, 0.25" Diameter (6.35 mm)
Probe Wearface	PEEK (Polyethlethylketone)
Cable	4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).
Serial Output	RS-232C (8, N, 1, user-set baud rate)
Temp. Limits	Ambient: -20 to 120° F (-30 to 50° C) Material: --ll0 to 200° F (-20 to 100° C Special high temperature probes are optionally available.
Battery Type	Two AA batteries
Battery Life	200 hours
Weight	7 ounces (196 g)
Size	2.5 x 4.5 x 1.25" (64 x 114 x 32mm)
Accessories Included	Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty	Gauge: 5 Years Probes: 90 Days

Complete Kit of the TI-25DL Data Logging Ultrasonic Thickness Gauge


The TI-25DL Data Logging Ultrasonic Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case.

Special Purpose Models

Model	Description
TI-25DL-H	High Temperature for surfaces up to 650° F or 343° C
TI-25DL-107	Cast Iron / Plastics
TI-25DL-HW	Heavy Wall (0.040-19.999")