$2,675.00
    warranty 1 year
    Product Description

    The Dakota PMX4-DL High Penetration Thickness Gauge Z-225-0002 is designed specifically for use on materials that are difficult to penetrate sound, due to the lack of material consistency, grain structure, and overall thickness.

    With multiple high voltage pulser options, as well as filters tuned for lower frequency transducers (500 kHz – 10 MHz), the Dakota PMX4-DL High Penetration Thickness Gauge compliments our product range by adding additional material types to our list of application possibilities. Common material types of interest are Fiberglass, carbon fiber, cast metals, rubber, high density polyethylene (HDPE), fiber reinforced plastic (FRP), lead, and all steels and aluminums.

    Typical target applications are Fiberglass sheets, pipes, storage tanks, aerospace composites, boat hulls, conveyor belts, composite plastics, etc. There are a variety of features and tools to accommodate a number of material types and applications. The electronic platform is FPGA driven for speed and accuracy. The screen refresh rate of 25Hz contributes to the overall responsiveness of the gauge.

    The built-in data logger has two file format options, grid or sequential, and is equipped with an internal 4Gb SD card for memory. Connectivity to a standard PC or Apple via USB-C, and used in conjunction with our Windows® PC or OSX reporting software available for download, at no charge, on our website

    Kit Contents


    • Dakota PMX4-DL High Penetration Thickness Gauge Z-225-0002
    • NIST Traceable Calibration Certificate
    • Couplant
    • PC Software (download) and Transfer Cable
    • AA Batteries
    • Instruction Manual
    • Carrying Case

    Probes/Transducers ou Transducer Cable are sold separately

    Click image to enlarge

    Features


    • Supplied with NIST Traceable Calibration Certificate
    • 2 Year Warranty
    • 4gb of memory for saving Grids, Sequential Data, Screen Captures, and 64 Setups
    • USB Data Output
    • A-Scan, B-Scan, and Digit Display Modes

    Specifications


    Pulse-Echo RangeSteel .050 in. – 100.0 ft. (1.27 mm – 30.5 M) Composites .100 in. – 5.00 in. (2.54 mm – 127 mm)
    Echo-Echo RangeSteel .100 in.–3.0 ft. (2.54 mm–91.44 cm)
    Echo-Echo Verify RangeSteel .100–6.0 in. (2.54–152.4 mm)
    Resolution(selectable) +/- .01 inch (0.1 mm). +/- .001 inch (0.01 mm)
    Velocity Range0.0122 to 0.7300 inches/µs 309.88 to 18542 meters/sec.
    PulserSpike – 200 volt, Square Wave – 400 volt, Tone Burst 400 volt, all adjustable with variable pulse widths and voltage settings
    ReceiverManual or AGC gain control with 110dB range, varies with mode selected. Adjustable damping (50, 75, 100, 300, 600 & 1500 ohms)
    Frequency Range500 kHz to 10MHz
    TimingPrecision TCXO timing with single shot 100 MHz 8 bit ultra low power digitizer
    PowerThree AA cells. Alkaline – 35 hrs, Nicad – 10 hrs, and NI-MH – 35 hrs. *dependent on pulser & backlight settings.
    Operating Temperature14 to 140F (-10C to 60C)
    Data OutputUSB-C port. Windows® PC interface software
    Display1/8in VGA grayscale display (240 x 160 pixels); viewable area 2.4 x 1.8in (62 x 5.7mm); EL backlit (on/off/auto invert)
    Transducer CompatibilitySingle Contact (1 to 10 MHz, and custom 500 kHz delay line (HPD1005B)
    Transducer ConnectorLocking quick disconnect LEMO "00" connector
    DimensionsWidth (2.5in/63.5 mm) Height (6.5 in/165 mm) Depth (1.24 in/31.5 mm)
    Weight13.5 ounces (with batteries)

    Related Products


    Precision Thickness Transducers

    • Complete line of genuine Single-Element Ultrasonic Precision Thickness Transducers manufactured by Dakota Ultrasonics for use with all Dakota and Checkline Ultrasonic Precision Thickness Gauges and Ultrasonic Flaw Detectors..
    Click image for more info

    Wall Thickness Gauge Accessories

    • Complete line of genuine Wall Thickness Gauge Accessories from Dakota, Checkline, and ElektroPhysik. Accurate non-destructive ultrasonic testing (NDT) relies on more than just the gauge and transducer and more
    Click image for more info

    Downloads


    Dakota PMX4-DL High Penetration Thickness Gauge Z-225-0002 - Data Sheet
    Dakota PMX4-DL High Penetration Thickness Gauge Z-225-0002 - Instruction Manual

    ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
    MODELS
    ACCESSORIES
    $1,338.00
    $150.00
    $107.00
    $34.00
    Copyright © 2026 Abq Industrial