ABQ Industrial offers a complete portfolio of Ultrasonic Corrosion and Wall Thickness Gauges from industry-leading manufacturers Dakota Ultrasonics, Checkline, and ElektroPhysik. Designed specifically for non-destructive testing (NDT) when access is limited to only one side of the test piece, these dual-element pitch-catch instruments accurately measure remaining wall thickness and internal pitting, erosion, and scaling across carbon steel, stainless steel, ductile and cast iron, aluminum, titanium, glass, ceramics, and rigid plastics.
From simple single-velocity field gauges and Echo-Echo Thru-Paint testers that eliminate coating thickness without scraping paint, to advanced A-Scan / B-Scan waveform data loggers and simultaneous Coating + Wall Thickness analyzers, our catalog provides IP65-sealed durability, NIST-traceable calibration, and high-speed scanning up to 100–200 Hz.
Precision Corrosion & Remaining Wall Thickness Measurement by Application
Selecting the optimal corrosion thickness gauge depends on whether the asset is painted or uncoated, the severity of internal surface pitting, and your reporting or waveform verification requirements:
Uncoated Pipes, Pressure Vessels, Boiler Tubes & Storage Tanks (Pulse-Echo P-E Mode)
When inspecting bare metal pipes, storage tank shells, ship hulls, and structural plates for internal corrosion pits and general wall thinning, standard Pulse-Echo (P-E) mode provides maximum thickness range (up to 36 inches / 914.4 mm in steel depending on the probe) and high sensitivity to small internal pits.

Painted Pipelines, Coated Marine Hulls & Epoxy-Lined Assets (Echo-Echo Thru-Paint Mode)
Standard Pulse-Echo gauges include the thickness of paint or epoxy coatings in the metal measurement—and because sound travels roughly 2.5 to 3 times slower in paint than in steel, a 0.020" paint layer can introduce a 0.050"+ positive error in steel thickness. Echo-Echo (E-E / Thru-Paint) mode uses a high-damped transducer (T-102-2700) to measure between two consecutive back-wall steel echoes, completely ignoring external coatings up to 0.040"–0.075" (1.0–1.9 mm) thick without scraping or damaging the protective paint.
|
|
 |

Simultaneous Coating Thickness & Substrate Wall Thickness Measurement (Pulse-Echo Coating Mode)
When inspectors need to verify both the protective coating thickness (0.0005" to 0.100" / 0.013 to 2.54 mm) and the underlying metal wall thickness on the screen at the same time from a single placement—or switch between Coating On (PE), Thru-Coat (EE), Temp-Compensated, and Coating-Only (CT) modes:
|
|
 |

Severe Internal Pitting, Cross-Sectional Profiling (B-Scan) & Waveform Verification (A-Scan)
In refinery piping, heat exchangers, and noisy or attenuative castings where internal laminations, steam erosion, or rough back-walls can cause false digital triggers, viewing the live cross-sectional profile (B-Scan) or full ultrasonic waveform (A-Scan) guarantees measurement integrity:

Complex Non-Ferrous Containers, Blow-Molded Plastics, Glass & Turbine Blades (Magnetic Target Ball Method)
When measuring complex geometries, tight corners, composite layups, glass bottles, or titanium/aluminum parts up to 24 mm (0.94") thick where acoustic attenuation or tight curvature prevents ultrasonic coupling:
- Recommended Solution: The ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge uses a wear-resistant SIDSP® magnetic probe on the outside surface and a small target steel ball or wire on the inside to measure non-magnetic wall thickness with micron-level repeatability at up to 20 readings/sec and 2 million stored readings.
|
|
 |
Ultrasonic Corrosion Thickness Gauge Comparison & Selection Guide
Use the technical comparison table below to match your inspection mode, display type, and data-logging capacity with the right model in this category:
| Model Series |
Measuring Modes |
Range in Steel (P-E / E-E) |
Display & Views |
Memory & Data Output |
Key Highlights |
| Dakota ZX-1 / ZX-3 / TI-25MX |
Pulse-Echo (P-E) |
P-E: 0.025" to 36.0" (0.63 to 914.4 mm) |
High-Contrast Backlit Digital LCD (0.001" / 0.01 mm res.) |
Non-Logging (Single USB output + Alarms on Dakota ZX-5) |
100 Hz High-Speed Min-Scan, 5-step Gain (ZX-3/ZX-5/TI-25MX), IP65 Aluminum Case, 5-Yr Warranty |
| TI-25MXT / Dakota ZX-6 / ZX-6DL |
Pulse-Echo (P-E) & Echo-Echo Thru-Paint (E-E) |
P-E: 0.025" to 36.0" E-E: 0.100" to 1.000" (2.54 to 25.4 mm) |
Backlit Digital LCD with Gain, Mode & Stability Bars |
Non-Logging (TI-25MXT / ZX-6) or 10,000 Readings w/ USB (ZX-6DL) |
Eliminates paint/coatings up to 0.040"–0.075"; 100 Hz Scan Mode; includes T-102-2700 Hi-Damp Probe |
| ElektroPhysik MiniTest 440 |
Pulse-Echo (P-E) & Echo-Echo Thru-Paint (E-E) |
P-E: 0.8 to 300 mm E-E: 3.0 to 25 mm |
128 × 64 px Backlit Graphic LCD (0.001" / 0.01 mm) |
5,000 Readings (10 Batches of 500) with USB Output |
Auto Probe Recognition & Auto Probe Zero; 10 Hz Min/Max High-Temp Scan Mode; includes U5.0E Probe |
| TI-CMX / Dakota CMX1-DL / TI-CMXDLP / CMX2-DL |
5 Modes: Coating On (P-E), Coating Off, Temp-Comp, Thru-Coat (E-E), & Coating Only (CT) |
Wall: 0.025" to 9.999" Coat (CT): 0.0005" to 0.100" (0.0001" res.) |
Simultaneous Dual Wall + Coating Readout (+ B-Scan on CMXDLP / CMX2-DL) |
200,000+ Readings (CMX1-DL) or B-Scan Grid Memory w/ RS-232 & Software |
Simultaneously displays substrate wall and coating thickness; 64–200 Hz High-Speed Scan; Differential & Alarm Modes |
| TI-MMX-SDL / Dakota MX1-DL (MMX-7) |
Pulse-Echo (P-E) & Echo-Echo Thru-Paint (E-E) with Hardware AGC |
P-E: 0.025" to 9.999" (0.60 to 254 mm) E-E: 0.100" to 4.0" |
Large Digits + Time-Based Cross-Sectional B-Scan |
12,000 Pages (Reading + B-Scan per page) & 64 Custom User Setups |
AutoFind signal locator, 32 Hz High-Speed Scan, Hi/Lo LED Alarms, PC Software included |
| TI-MVX / Dakota MX2-DL (MVX) |
P-E, P-E w/ Gate, E-E Thru-Paint, & Flaw Prove-Up Mode |
P-E: 0.025" to 19.999" (0.63 to 254+ mm) E-E: 0.100" to 4.0" |
1/8" VGA Grayscale: RF & Rectified A-Scan, B-Scan, & Large Digits |
12,000 Readings + Waveforms (16 Mb Non-Volatile RAM) & 64 User Setups |
Full manual waveform gate & gain control for attenuative castings, noisy alloys, and deep pitting |
| ElektroPhysik MiniTest-FH (80-190-0000) |
SIDSP® Magnetic Target Ball / Wire Method |
0 to 24 mm (0 to 0.94") depending on FH2/FH4/FH10 probe |
High-Resolution Digital Display with Live Statistics |
2 Million Readings in 200+ Batches; USB & RS-232 Output |
Measures non-ferrous metals (titanium, aluminum), plastics, glass, and composites regardless of tight radii |
Key Technical Capabilities & Compatible Transducer Options
- High-Speed Minimum-Thickness Scan Mode (32 Hz to 200 Hz): Instead of taking isolated single-point readings that can miss localized corrosion pits, slide the transducer continuously across a pipe elbow or tank wall to capture the absolute minimum wall thickness detected during the scan pass.
- Interchangeable Dual-Element Transducers (1 MHz to 10 MHz): Customize your gauge for any substrate thickness, diameter, or surface temperature via our Thickness Gauge Transducers and Wall Thickness Gauge Accessories categories:
- Small-Diameter Boiler Tube Probes (
3/16" / 5 MHz & 7.5 MHz): Minimal contact area (T-101-2000-C, T-101-2700, T-101-3700) for tightly curved tubing down to a 0.350" (8.89 mm) convex radius, compatible with our V-Block Transducer Holder (F-000-7001).
- High-Penetration & Attenuative Material Probes (
1/2" / 1.0 MHz & 2.25 MHz): Low-frequency transducers (T-104-0000, T-104-1000, T-104-0600) for thick steel plates, cast iron, fiberglass, and coarse-grained metals.
- High-Temperature Probes (Up to 650°F / 343°C): Specialized thermal delay-element probes (
T-042-2000, T-042-2700, T-044-2700) coupled with high-temperature couplant (CF-4H Sono 600) for in-service hot piping and vessels.
- Underwater Survey Cable Assemblies: Optional 50 ft (15 m) waterproof transducer cables (
TI-25-UW-50) for marine hull and piling inspections.
Need 0.0001" (0.001 mm) micron-level resolution for thin plastics, aircraft skins, and precision machined parts, or specialized testers for ductile iron nodularity and engine cylinder walls? Explore our sibling subcategories under Ultrasonic Thickness Gauges.
!--ela-->