Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 with T-102-2000 Probe

See More Ultrasonic Thickness Gauges

Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 with T-102-2000 Probe

See More Ultrasonic Thickness Gauges
Price:
$1,675.00
    warrenty

    Product Description
    Calibrate to known thickness or Select Material from 8 Presets
    Resolution: .001" (0.01 mm)
    Includes NIST-Traceable Calibration Certificate, CE-Certified
    5-Year Warranty, Made in USA
    Datalogging: NO

    Total Measuring Range (depends on material and transducer/probe type)
    0.025 - 36.000 inches
    0.63 - 914.4 mm
    Measuring Range on Steel (with standard T-102-2000 probe)
    0.040 - 8.00 inches
    1.00 - 199.9 mm

    The Dakota Ultrasonics ZX-3 Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! It can measure thickness up to 36 inches (915 mm), depending upon the material and transducer.

    The Dakota Ultrasonics ZX-3 combines the best features of the ZX-2 allowing the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocity as desired and allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points.

    The ZX-3 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

    The ZX-3 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions


    line
    Kit Contents
    line

    • Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 With T-102-2000 Probe
    • 4 oz. bottle of coupling fluid
    • 2 AA batteries
    • NIST Traceable Calibration Certificate
    • Carrying case
    • Instruction Manual


    line
    Features
    line

    • Includes NIST Traceable Calibration Certificate
    • Resolution of 0.001 inch (0.01 mm)
    • Switch-selected units for inches or mm
    • User-selected Manual or Auto Zero of Transducer
    • User can select from 8 preset materials as well as program 2 custom material velocities
    • Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity
    • 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity
    • Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed
    • Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications
    • Special-purpose probes are offered for a variety of applications (1 to 10 MHz)
    • The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) 
      to provide trouble-free operation under the toughest field conditions
    • For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available
    • High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C)
    • LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units
    • Operates on two (2) AA Batteries - 45 hours continuous operation
    • Selectable Backlight ON/OFF/AUTO
    • 5 Year Warranty, CE-Certified and Made in USA


    line
    Specifications
    line

    Total Measuring Range
    (Steel)
    0.025 - 36.000 inches
    0.63 - 914.4 mm
    (depends on material and transducer/probe type)
    Measuring Range
    (Steel)
    0.040-8.000 inches
    1.00-199.9 mm
    (with standard transducer T-102-2000)
    Resolution0.001 inch (0.01 mm)
    Measuring ModePulse-Echo (P-E)
    Velocity Range0.0120 to .7300 in/μs. 305 to 18,542 meters/sec
    GAIN AdjustmentAdjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB
    Probe (Standard)1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300
    Probes (optional)1 to 10 MHz, 3/16" up to 1 inch (custom probes available)
    Probe WearfacePEEK (Polyethylethylkytone)
    Cable1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors
    LCD DisplayMulti-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes
    Display BacklightBacklight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options
    Display Update Rate10 Hz (10 updates/sec)
    Temp. LimitsAmbient: -30 to 75° C (-22 to 167° F)
    Material: -20 to 100° C (0 to 200° F)
    High temperature probes available
    Battery Type2x AA batteries (rechargeable batteries can be used)
    Battery Life45 hours continuous use
    Weight308 grams (11 ounces)
    Dimensions63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25")
    AccessoriesProbe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
    HousingExtruded aluminum body with nickel-plated aluminum end caps (gasket sealed)
    Housing RatingIP65
    CertificationsNIST Traceable and MIL-STD-45662A
    KeypadSealed membrane that is resistant to both water and petroleum products
    Seven or eight tactile-feedback keys
    Pulse Repetition Frequency (PRF)200 Hz (200 pulses/sec)
    To Lock SettingsWith gauge powered off, press and hold the "+" key while powering on the gauge
    The LOCK icon will be illuminated on the Display
    To unLock SettingsWith gauge powered off, press and hold the "-" key while powering on the gauge
    The LOCK icon will turn off
    WarrantyGauge: 5 Years
    Probes: 90 Days


    line
    Measuring Limits
    line

    Minimum Radius for Convex Surfaces0.350" (8.89 mm)
    Minimum Radius for Concave Surfaces3" (76.2 mm)
    Minimum Headroom1" (25.0 mm)
    Minimum Sample Diameter0.150" (3.8 mm)
    Minimum Substrate Thickness - Fna
    Minimum Substrate Thickness - NFena


    line
    Related Products
    line

    TI-25-UW-50
    50 Foot Underwater Probe / Cable Assembly

    • 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors
    related

    line

    V-Block
    Ultrasonic Transducer Holder

    related


    line
    Downloads
    line

    Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 - Data Sheet
    Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 - Instruction Manual

    F.A.Q.

    Do Dakota Ultrasonics Thickness Gauges require any training for use?

    No. Dakota Ultrasonics Thickness Gauges are designed for simple operation and feature easy-to-use instruction manuals. We also provide technical support via telephone and/or email, and a 30-day money back guarantee.

    Are Dakota Ultrasonics Thickness Gauges calibrated at the factory?

    Yes. Dakota Ultrasonics Thickness Gauges arrive fully calibrated and ready to measure.

    Do Dakota Ultrasonics Thickness Gauges include Certificate of Calibration?

    Yes. Dakota Ultrasonic Thickness Gauges includes NIST-Traceable Calibration Certificate, CE-Certified

    Can I measure the thickness of non-metallic materials like plastic and rubber with Dakota Ultrasonics Thickness Gauges?

    Yes. Dakota Ultrasonics Thickness Gauges features several preprogrammed sound velocities for common materials.

    Can Dakota Ultrasonics Thickness Gauges measure cast/ductile iron or cast aluminum?

    Yes. Dakota Ultrasonics Thickness Gauges instruments are designed to accurately measure the wall thickness of carbon steel, aluminum, stainless steel and plastic.
    ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
    Models Price
    $1,675.00
    Recommended Accessories PRICE
    $295.00
    $90.00
    $125.00
    $175.00
    $35.00
    $35.00
    $330.00
    $295.00
    $305.00
    $305.00
    $305.00
    $360.00
    $370.00
    $380.00
    $445.00