Dakota Ultrasonics MX-1 Ultrasonic Thickness Gauge

See More Ultrasonic Thickness Gauges

Dakota Ultrasonics MX-1 Ultrasonic Thickness Gauge

See More Ultrasonic Thickness Gauges
This product has been discontinued

Product Description

Perfect choice when only one material is being tested day after day

Range: 0.025 - 19.99 inches - 0.63 - 199.99 mm


Resolution: .001" (0.01mm)

Datalogging: NO

The Dakota Ultrasonics MX-1 Ultrasonic Thickness Gauge will hold a single velocity, making it the perfect choice applications where only one material is being tested day after day. With the preset velocity in the gauge, you simply turn the MX-1 Ultrasonic Wall Thickness Gauge on and go to work.

The tool's backlit display is easy to read, even in dim light conditions, and the unit operates for up to 200 hours on a single set of AA batteries.

MX-1 Ultrasonic Thickness Gages come complete, ready to use, and is protected by Dakota Ultrasonics 5 year limited warranty

Applications:

Corrosion & Pitting
Tube & Pipe
Tanks
Boilers
Glass
Variety of Applications


line
Features
line

  • Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions
  • Measurements displayed in inches, inches/microsecond, millimeters, and meters/second
  • Measures from 0.025 to 19.999 inches (0.63 to 199.99 millimeters) switch to select English or metric units
  • Four readings per second for single point measurements

lineTypical Applicationsline

typical

lineMeasuring Limitsline

Minimum Radius for Convex Surfaces 0.350" (8.89 mm)
Minimum Radius for Concave Surfaces 3" (76.2 mm)
Minimum Headroom 0.150" (3.8 mm)
Minimum Sample Diameter 0.150" (3.8 mm)
Minimum Substrate Thickness - F na
Minimum Substrate Thickness - NFe na


lineSpecificationsline

Measuring Range 0.025 to 19.999 inches
0.63 to 199.99 millimeters
Resolution 0.001 inch
0.01 millimeter
Velocity Range .0492 to .3937 in/µs
1250 to 10,000 meters/sec
Dimensions 2.5 W x 4.75 H x 1.25 D inches
Range in Steel 0.040-6.000" (1.00-150.0 mm) with supplied probe. Other probes available.
Resolution .001" (0.01 mm)
Display 4½ - Digit, 0.5" Backlit LCD
Probe 1/4", 5 MHz, actual wearface is 5/8" (17mm)
Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).
Temp. Limits Ambient: -20 to 120° F (-30 to 50° C)
Material: -0 to 200° F (-20 to 100° C
Special high temperature probes are optionally available.
Battery Type Two 1.5V alkaline or 1.2V NiCad AA cells.
Battery Life Typically operates for 200 hours on alkaline and 130 hours on NiCad.
Weight 10 ounces (283 g)
Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty Gauge: 5 Years
Probes: 90 Days


lineComplete Kitline

The MX-1 Ultrasonic Wall Thickness Gaugeis supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carryingcase

lineRelated Productsline

NIST-Traceable Steel Test Block
3 Sizes Available

  • Precision Machined and Finished
  • Includes NIST Report and Test Data

line

Uncertified Steel Test Block
For Ultrasonic Gauges
  • For convenient confirmation of thickness gauge calibration

line

SB4
Steel Test Block without certification

  • For convenient confirmation of thickness gauge calibration

line

CF12
Coupling Fluid

  • Used to create an ultrasonic coupling between the probe and material to be measured
  • 12 oz Bottle

line

TICC-M
Protective Holder for Ultrasonic Gauges

  • Constructed from heavy duty Cordura Nylon
  • Built-in belt loop

line

V-Block
Transducer Holder

  • The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas

line

TI-25-UW-50
50 Foot Underwater Probe / Cable Assembly

  • 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors

lineline


F.A.Q.

Do Dakota Ultrasonics Thickness Gauges require any training for use?

No. Dakota Ultrasonics Thickness Gauges are designed for simple operation and feature easy-to-use instruction manuals. We also provide technical support via telephone and/or email, and a 30-day money back guarantee.

Are Dakota Ultrasonics Thickness Gauges calibrated at the factory?

Yes. Dakota Ultrasonics Thickness Gauges arrive fully calibrated and ready to measure.

Do Dakota Ultrasonics Thickness Gauges include Certificate of Calibration?

Yes. Dakota Ultrasonic Thickness Gauges includes NIST-Traceable Calibration Certificate, CE-Certified

Can I measure the thickness of non-metallic materials like plastic and rubber with Dakota Ultrasonics Thickness Gauges?

Yes. Dakota Ultrasonics Thickness Gauges features several preprogrammed sound velocities for common materials.

Can Dakota Ultrasonics Thickness Gauges measure cast/ductile iron or cast aluminum?

Yes. Dakota Ultrasonics Thickness Gauges instruments are designed to accurately measure the wall thickness of carbon steel, aluminum, stainless steel and plastic.