Dakota Ultrasonics MMX-7 High Performance Data Logging Wall Thickness Gauge Z-160-0003 with T-102-2700 Probe

See More Ultrasonic Thickness Gauges

Dakota Ultrasonics MMX-7 High Performance Data Logging Wall Thickness Gauge Z-160-0003 with T-102-2700 Probe

See More Ultrasonic Thickness Gauges
Price:
$2,325.00
    warrenty

    Product Description
    Range: 0.025 - 19.999 inches - 0.60 - 254.0 mm
    Dakota Ultrasonics MMX-7 High Performance Data Logging Wall Thickness Gauge Z-160-0003 with Enhanced Data Logging with time based B Scan for a cross section view
    Resolution: .001" (0.01 mm)
    Datalogging: YES

    The Dakota Ultrasonics MMX-7 High Performance Data Logging Wall Thickness Gauge Z-160-0003 is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values.

    The Dakota Ultrasonics MMX-7 High Performance Data Logging Wall Thickness Gauge Z-160-0003 features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use.


    line
    Kit Contents
    line

    • Dakota Ultrasonics MMX-7 High Performance Data Logging Wall Thickness Gauge Z-160-0003 With T-102-2700 Probe
    • 4 oz. bottle of coupling fluid
    • 2 AA batteries
    • NIST Traceable Calibration Certificate
    • Data Transfer Software
    • Serial Output
    • Carrying case
    • Instruction Manual


    line
    Features
    line

    • The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
    • The MMX-7 also comes complete with our Windows® PC software for transferring data to and from a PC.
    • Built in hardware AGC gain control for through paint measurements in multi mode operation.
    • The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.
    • The MMX-7 has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
    • Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
    • CE Certified
    • Includes NIST-Traceable Calibration Certificate
    • Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
    • 2 Year Warranty


    lineSpecificationsline

    Range in SteelPulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)

    Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.100 - 4.000 inches). Range will vary depending on the thick
    Resolution.001 inches (0.01mm)
    Velocity Range.0492 to .3936 in./ms
    1250 to 9999 meters/sec
    UnitsEnglish & Metric
    Measurement Modes- Pulse-Echo (flaws, pits)
    - Echo-Echo (thru-paint)
    Transducer TypesDual Element (1 to 10 MHz).
    Memory16 megabit non-volatile ram
    Memory capacity12,000 pages with 1 reading and waveform per page
    Power SourceThree 1.5V alkaline or 1.2V NiCad AA cells
    Battery LifeTypically operates for 150 hours on alkaline and 100 hours on NiCad
    Auto Power offif idle 5 min
    Display1/8 in. VGA grayscale display 62 x 45.7mm
    KeyboardMembrane switch with twelve tactile keys
    CaseExtruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
    Operating Temperature-14° to 140°F (-10° to 60°C)
    Weight, net383 grams
    Dimensions63.5 W x 165 H x 31.5 D mm
    Warranty2 year limited
    CertificationCE Approved, Factory calibration traceable to national standards


    lineRelated Productsline

    NIST-Traceable Steel Test Block
    3 Sizes Available

    • Precision Machined and Finished
    • Includes NIST Report and Test Data

    line

    DataComm
    Software for Thickness Gauges
    ABQ

    line

    TICC-M
    Protective Holder for Ultrasonic Gauges

    • Constructed from heavy duty Cordura Nylon
    • Built-in belt loop

    line

    Uncertified Steel Test Block
    For Ultrasonic Gauges
    • For convenient confirmation of thickness gauge calibration

    F.A.Q.

    Do Dakota Ultrasonics Thickness Gauges require any training for use?

    No. Dakota Ultrasonics Thickness Gauges are designed for simple operation and feature easy-to-use instruction manuals. We also provide technical support via telephone and/or email, and a 30-day money back guarantee.

    Are Dakota Ultrasonics Thickness Gauges calibrated at the factory?

    Yes. Dakota Ultrasonics Thickness Gauges arrive fully calibrated and ready to measure.

    Do Dakota Ultrasonics Thickness Gauges include Certificate of Calibration?

    Yes. Dakota Ultrasonic Thickness Gauges includes NIST-Traceable Calibration Certificate, CE-Certified

    Can I measure the thickness of non-metallic materials like plastic and rubber with Dakota Ultrasonics Thickness Gauges?

    Yes. Dakota Ultrasonics Thickness Gauges features several preprogrammed sound velocities for common materials.

    Can Dakota Ultrasonics Thickness Gauges measure cast/ductile iron or cast aluminum?

    Yes. Dakota Ultrasonics Thickness Gauges instruments are designed to accurately measure the wall thickness of carbon steel, aluminum, stainless steel and plastic.
    ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
    Models Price
    $2,325.00
    Recommended Accessories PRICE
    $85.00
    $335.00
    $350.00
    $305.00
    $295.00
    $305.00
    $295.00
    $330.00
    $380.00
    $45.00
    $445.00