Dakota Ultrasonics CMX Ultrasonic Coating and Wall Thickness Gauge Z-170-0003

See More Ultrasonic Thickness Gauges

Dakota Ultrasonics CMX Ultrasonic Coating and Wall Thickness Gauge Z-170-0003

See More Ultrasonic Thickness Gauges
Price:
$2,125.00
    warrenty

    Product Description

    Range: 0.025 - 9.999 inches - 0.60 - 254.0 mm


    Dakota Ultrasonics CMX Ultrasonic Coating and Wall Thickness Gauge Z-170-0003


    Resolution: .001" (0.01 mm)


    Datalogging: YES



    The Dakota Ultrasonics CMX Ultrasonic Coating and Wall Thickness Gauge Z-170-0003 measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the Dakota Ultrasonics CMX Ultrasonic Coating and Wall Thickness Gauge Z-170-0003 automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coating.

    Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring).

    • Five user-selected operating modes are included:
    • Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness.
    • Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only.
    • Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature.
    • Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included)
    • Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range will vary slightly depending on the coating.


    line
    Kit Contents
    line

    • Dakota Ultrasonics CMX Ultrasonic Coating and Wall Thickness Gauge Z-170-0003
    • Probe
    • 4 oz. bottle of coupling fluid
    • 2 AA batteries
    • NIST-Traceable Calibration Certificate
    • RS-232 cable and software
    • Operating manual
    • Carrying case


    line
    Features
    line

    • Hardware AGC gain control for multiple echo and thru-paint measurement.
    • 2 year limited warranty
    • Multiple calibration options: One Point, Two Point, or selection from a Material List.
    • PVX comes complete with our Windows® PC software for transferring data to and from a PC.
    • 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications.
    • User-selected resolution of 0.001" or 0.0001" inch units and 0.01 or 0.001 in mm units
    • PVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs.
    • Visual and audible alarm with hi and lo limit settings for specific application tolerances.
    • The high speed scan feature
    • 1/4" 15MHz Delay Line Probe p/n T-481-5507 also available when pencil probe is not needed. Specify TI-PVX-5507 to order as complete kit with this probe
    • Auto find features locates the detection point(s) and adjusts the display settings to bring the waveform into view.
    • Includes NIST-Traceableb calibration certificate
    • CE Certified


    lineSpecificationsline

    Range in SteelPulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters)
    Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thick
    Range in Coating Only Mode0.0005" - 0.1000" / Resolution: 0.0001"
    (0.013 - 2.540 mm / Resolution: 0.001 mm)
    Max Coating0.100" (2.54mm)
    Resolution.001 inches (0.01mm)
    Velocity Range.0492 to .3936 in./ms
    1250 to 9999 meters/sec
    UnitsInch or mm
    Measurement Modes- Pulse-Echo (corrosion mode)
    - Pulse-Echo Coating (Corrosion w/o coating)
    - Echo-Echo (thru-paint)
    - Temp Comp (auto adjust for material temp)
    - Coating Only (Ultrasonic Coating Gauge)
    Transducer TypesDual Element (1 to 10 MHz).
    OutputRS-232 for upload/download of setups
    Memory capacityTI-CMX: None
    TI-CMXDL: over 200,000 measurements
    Power SourceThree 1.5V alkaline or 1.2V NiCad AA cells
    Battery LifeTypically operates for 150 hours on alkaline and 100 hours on NiCad
    Auto Power offAfter 5 minutes of non-use
    Display1/8 in. VGA grayscale display 62 x 45.7mm
    KeyboardMembrane switch with twelve tactile keys
    CaseExtruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
    Temp. LimitsAmbient: -20 to 120° F (-30 to 50° C)
    Material: -0 to 200° F (-20 to 100° C)
    Special high temperature model TI-CMX-H is available for 300°F/150°C and optional probes are offered for higher surface temperatures
    Weight, net383 grams
    Dimensions63.5 W x 165 H x 31.5 D mm
    Warranty2 year limited
    CertificationCE Approved, Factory calibration traceable to national standards


    line
    High Speed Scan Mode & B-Scan Mode
    line

    Hi-Speed Scan Mode
    • Scan Mode measures 64 times per second, displaying the max and min reading measured during the scan interval. Sample rate is 200/sec when coating measurement is off
    B-Scan Mode
    • The B-Scan displays a time based cross section view of test material of the contour of the blind, or underside of a pipe or tank application. the B-Scan view draws at a rate of seven seconds per screen from right to left


    lineMeasuring Limitsline

    Minimum Radius for Convex Surfaces1" (25.4 mm)
    Minimum Radius for Concave Surfaces3" (76.2 mm)
    Minimum Headroom3" (76.2 mm)
    Minimum Sample Diameter0.5" (12.7 mm)
    Minimum Substrate Thickness - Fna
    Minimum Substrate Thickness - NFena


    lineRelated Productsline

    NIST-Traceable Steel Test Block
    3 Sizes Available

    • Precision Machined and Finished
    • Includes NIST Report and Test Data

    line

    DataComm
    Software for Thickness Gauges
    ABQ

    line

    TICC-M
    Protective Holder for Ultrasonic Gauges

    • Constructed from heavy duty Cordura Nylon
    • Built-in belt loop

    line

    Uncertified Steel Test Block
    For Ultrasonic Gauges
    • For convenient confirmation of thickness gauge calibration

    line

    TI-CMX-UW-50
    50 Foot Underwater Probe / Cable Assembly
    • 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors

    line

    V-Block
    Transducer Holder

    • The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas

    F.A.Q.

    Do Dakota Ultrasonics Thickness Gauges require any training for use?

    No. Dakota Ultrasonics Thickness Gauges are designed for simple operation and feature easy-to-use instruction manuals. We also provide technical support via telephone and/or email, and a 30-day money back guarantee.

    Are Dakota Ultrasonics Thickness Gauges calibrated at the factory?

    Yes. Dakota Ultrasonics Thickness Gauges arrive fully calibrated and ready to measure.

    Do Dakota Ultrasonics Thickness Gauges include Certificate of Calibration?

    Yes. Dakota Ultrasonic Thickness Gauges includes NIST-Traceable Calibration Certificate, CE-Certified

    Can I measure the thickness of non-metallic materials like plastic and rubber with Dakota Ultrasonics Thickness Gauges?

    Yes. Dakota Ultrasonics Thickness Gauges features several preprogrammed sound velocities for common materials.

    Can Dakota Ultrasonics Thickness Gauges measure cast/ductile iron or cast aluminum?

    Yes. Dakota Ultrasonics Thickness Gauges instruments are designed to accurately measure the wall thickness of carbon steel, aluminum, stainless steel and plastic.
    ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
    Models Price
    $2,125.00
    $2,125.00
    $2,125.00
    Recommended Accessories PRICE
    $335.00
    $350.00
    $350.00
    $335.00
    $370.00
    $335.00
    $335.00
    $705.00
    $85.00
    $35.00
    $150.00
    $175.00
    $35.00
    $110.00