The Tramex MEP Moisture Encounter Plus is a non-destructive overall building inspection moisture meter based on Impedance measurement which has applications for numerous industries. It has many unique features that make moisture measurement and evaluation fast, precise and versatile.

The Tramex MEP detects and evaluates moisture conditions within various building materials such as Wood, Timber, Drywall, Roofing, Plaster & Brick by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture in the material under test. The Tramex MEP Moisture Encounter Plus determines the strength of the current and converts this to a moisture content value, displaying it on a large clear analog dial.

Used and trusted by generations of professionals worldwide for the purpose of:

• Locating moisture related problems within and behind a variety of building materials in the building envelope.
• Mapping the extent of moisture damage caused to buildings.
• Monitoring progressive drying conditions in the drying process of building materials and surfaces.

Kit Contents

The Tramex MEP Moisture Encounter Plus Moisture Meter includes everything needed for testing:

Tramex MEP Moisture Encounter Plus Moisture Meter Tramex Single Meter Case 9 V PP3 Operating Instructions Certificate of Calibration One (1) year warranty

Features

• Wide range of readings for wood from 5% to 30%.
• Deep signal penetration to over 1" ( 25mm) into the materials being tested without the need to damage the surface. Signal penetration depends on material being tested and meter setting.
• Three ranges of sensitivity: Wood & Timber / Drywall & Roofing / Plaster & Brick – making it ideal for testing moisture conditions in various building materials.
• Detects moisture through paint, wall coatings, drywall, ceramic tiles, floor coverings, wood, roof coverings and ceiling tiles.
• High moisture audio warning tone.

Specifications

Related Products

Tramex MRH3 Moisture and Humidity Meter A hand-held digital moisture meter calibrated for most building materials. It also attaches to an optional plug-in Tramex Hygro-i ® relative humidity probe and heavy-duty pin type electrodes

Tramex WDIK5.1 Water Damage Restoration Inspection Kit A complete kit for moisture testing of concrete & wood flooring and numerous other building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing.

Tramex WDMK5.1 Water Damage Restoration Master Kit The ultimate Tramex kit for moisture testing of concrete & wood flooring and numerous other building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing.

Tramex IRT2 Infrared Surface Thermometer The IRT2 is a handheld, dual laser, non-contact Infrared Thermometer with 12:1 distance to spot ratio and audible and visible high/low set point alarms

Downloads

Tramex MEP Moisture Encounter Plus Moisture Meter - Quick Guide

Tramex MEP Moisture Encounter Plus Moisture Meter- Instruction Manual

Tramex MEP Moisture Encounter Plus Moisture Meter- Data Sheet

Tramex Moisture Meters - Accessories