Tapes
Cylindrical rollers pointing away from the operator
Special model where the rollers point away from the operator as the scale is viewed for applications where the access is limited to the front or top of the tape.
Cylindrical rollers are offered in 7, 10, 15, 20, 30, 36, 41 and 50 mm lengths. Roller length should not exceed 2x the width of the material being measured.
Tension Ranges: Refer to DX2 Data Sheet.
NOTE: Starting point of low-range instruments will be higher than DX2.
Note: This model does not include a filament guide and material thickness compensator
Kit Contents
- TX2 Tape Tension Meter
- Instruction manual
- Carrying case
Features
- Dual-flanged outer guide rollers with various widths for better filament guide (single-flanged rollers optional, recommendable if the material beeing measured is wider than the tape roller)
- Tape rollers with contact surface from 7 mm up to 50 mm are available
- Roller shifting mechanism ensure easy acquisition of the running material
- Built-in mounting holes permit fixed installation for online use
- Finger Support: We recommend mounting a finger support for higher tension ranges
Specifications
| Accuracy | ± 1% of full scale or
± 1 graduation mark on scale |
| Diameter of Scale | 41 mm |
| Maximum Speed | 1000 m/min |
| Roller Material | Hardcoated aluminium |
| Housing Material | Die-cast aluminum |
| Temperature range | 50 - 113°F (10 - 45°C) |
| Air humidity | 85 % RH, max. |
| Housing dimensions (L x W x H) | 7.5 x 3.3 x 1.8 in(188 x 85 x 45 mm) |
| Weight, net (gross) | 1.2 lbs (3 lbs) |
Ranges
Calibration to customized material:
If process material differs significantly from the standard calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 15 ft. should be supplied.
The complete model number include KXB plus range code, e.g. KXB-200 and 500 models add length of sensing pin, e.g. eg., KXB-200/17
Downloads
