Cutting Force Measurement On Rotary Die Cutters
Application area is the adjustment of pre-tensioning force and the monitoring of cutting force in rotary die cutters. This is important for a reproducible cutting result and for a long operating life of the cutting unit.
The Pressure Mate system consists of:
- two threaded spindles with built-in force sensors (Axial Force Sensor)
- a 2-channel measuring amplifier DMV 05. The cutting force is measured on both bearing positions of the cutting die and is displayed in kg.
| The analog output signal of the measuring amplifier is exactly proportional to the real periodic cutting force. It can be recorded and analyzed with HCC-Easy Software
Info
- rotary cutting dies
- rotary anvils
- bearings
| - toothed wheels
- supporting rollers
|
An increasing cutting force due to temperature for example can be detected and re-adjusted immediately.
Pressure Mate ensures constant high product quality, decreasing downtime and increasing operating life of the cutting dies. exemplary characteristics of cutting force | In contrast to hydraulic gauges principally Pressure Mate has no mechanical elastic compliance. It´s a measurement without motion in order to avoid relative movement between rotary cutting die and rotary anvil.
As a result of the sensor´s high mechanical stiffness the cutting process is very stable, free of vibration and precisely.
Downloads
