Tramex MEP Moisture Encounter Plus Moisture Meter

Description
Price: $423.00
Tramex MEP Non Destructive Moisture Meter Encounter Plus
Measurement method:
Non-destructive moisture measurement, 1" (25 mm) signal penetration depth
Display: Analog Meter

The Tramex MEP Moisture Encounter Plus is a non-destructive overall building inspection moisture meter based on Impedance measurement which has applications for numerous industries. It has many unique features that make moisture measurement and evaluation fast, precise and versatile.

The MEP Moisture Encounter Plus detects and evaluates moisture conditions within various building materials by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture in the material under test. The MEP determines the strength of the current and converts this to a moisture content value, displaying it on a large clear analog dial.

Used and trusted by generations of professionals worldwide for the purpose of:

  • Locating moisture related problems within and behind a variety of building materials in the building envelope.
  • Mapping the extent of moisture damage caused to buildings.
  • Monitoring progressive drying conditions in the drying process of building materials and surfaces.


line
Photo Gallery
line

line
Features
line

  • Wide range of readings for wood from 5% to 30%.
  • Deep signal penetration to over 1" ( 25mm) into the materials being tested without the need to damage the surface. Signal penetration depends on material being tested and meter setting.
  • Three ranges of sensitivity: Wood & Timber / Drywall & Roofing / Plaster & Brick – making it ideal for testing moisture conditions in various building materials.
  • Detects moisture through paint, wall coatings, drywall, ceramic tiles, floor coverings, wood, roof coverings and ceiling tiles.
  • High moisture audio warning tone.

line
Video
line

line
Specifications
line

Size6" x 3.5" x 1.5" (150mm x 85mm x 38mm)
Weight7.7oz (220g)
ConstructionABS Body Power: 9 volt PP3
Battery included
DisplayAnalog Depth of penetration: up to 1¼"(30mm)(in wood, drywall)
Measuring range:
Wood Moisture Content5 to 30%
Reference scale for building materials0 to 100


line
Related Products
line

Tramex MRH3
Moisture and Humidity Meter

  • A hand-held digital moisture meter calibrated for most building materials. It also attaches to an optional plug-in Tramex Hygro-i ® relative humidity probe and heavy-duty pin type electrodes
related

line

Tramex WDIK5.1
Water Damage Restoration Inspection Kit

  • A complete kit for moisture testing of concrete & wood flooring and numerous other building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing.
related

line

Tramex WDMK5.1
Water Damage Restoration Master Kit

  • The ultimate Tramex kit for moisture testing of concrete & wood flooring and numerous other building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing.
related

line

Tramex IRT2
Infrared Surface Thermometer

  • The IRT2 is a handheld, dual laser, non-contact Infrared Thermometer with 12:1 distance to spot ratio and audible and visible high/low set point alarms
related


line
Downloads
line

Tramex MEP Moisture Encounter Plus Moisture Meter - Quick Guide
Tramex MEP Moisture Encounter Plus Moisture Meter - Instruction Manual
Tramex MEP Moisture Encounter Plus Moisture Meter - Data Sheet

line
Buy Now
line


ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASED
ItemPrice
$423.00
AccessoriesPRICE
$135.00
$85.00
$135.00