The KXB Warp Tension Meter is designed for measuring tension on multiple ends of a warp. A reference frame makes it easy to scoop up the selected number of ends for measurement and keeps the unit perpendicular while it rests on the warp. K10, K30 & EX ranges are supplied with a 10 mm sensing pin.
Kit Contents
- KXE Warp Tension Meter
- Instruction manual
- Carrying case
Features
- NIST-Traceable Calibration Certification OPTIONAL
- Width of the sensing pin 10 mm
- Finger Support: We recommend mounting a finger support for higher tension ranges
- Roller shifting mechanism ensure easy acquisition of the running material
- Large reference frame (15 x 17 cm) is placed on the warp threads allowing the safest and most accurate mesaurements possible.
- Supplied in foam-fitted hard-plastic carrying case
- Warranty: 1-Year
- Made in Germany
Specifications
| Accuracy | ± 1% of full scale or
± 1 graduation mark on scale |
| Diameter of Scale | 41 mm |
| Housing Material | Die-cast aluminum |
| Temperature range | 50 - 113°F (10 - 45°C) |
| Air humidity | 85 % RH, max. |
| Housing dimensions(L x W x H) | 7.5 x 3.3 x 1.8 in(188 x 85 x 45 mm) |
| Weight, net (gross) | 1.2 lbs (3 lbs) |
Ranges
| Model | Range | Sensing Pin Length |
| KXB-K10 | 20-100 g | 10mm |
| KXB-K30 | 20-300 g | 10mm |
| KXB-EX | 100-1000 g | 10mm |
| KXB-200 | 200-2000 g | 10mm |
| KXB-500 | 500-5000 g | 10mm |
Operation
We recommend always measuring the same number of ends, such as 5 or 10 ends (repeat of pattern) or only a single end at a time. During measurement make sure that the ends are not pulled or pressed out of their alignment
Options
Memory Pointer (M) Designed to retain the peak value as tensions fluctuate. Manually reset by using the knob located in the center of the dial. |  |
Downloads
