Measure tension and compression force

---

Suitable for larger and heavier grips and fixtures

---

Compatible with Model F105, F305, F505, and F505H test frames

---

The Mark-10 Series FS06 Tension and Compression Force Sensors is designed to accommodate bulkier grips and fixtures, they are compatible with Series F test frame models up to 500 lbF / 2.2 kN.

With Plug & Test® technology, all configuration and calibration data is saved within the sensor, allowing it to be calibrated on the test frame or off-site with a Mark-10 indicator (optional adapter AC1083 required).

Ranges are available from 50 to 500 lbF [250 N to 2.5 kN].

Compatible with Models F105, F305, F505, and F505H.

Features

• Measure tension and compression force
• Suitable for larger and heavier grips and fixtures
• Compatible with Model F105, F305, F505, and F505H test frames
• Member of the Plug & Test® family of interchangeable sensors and indicators (optional adapter AC1083 required)
• NIST-traceable certificate of calibration with data is included
• Warranty: 3 years

Specifications

	FS06-50	FS06-300
Weight	FS06-200: 1.7 lb [0.8 kg]	FS06-500: 1.9 lb [0.9 kg]
Accuracy	± 0.15% of full scale + indicator or test frame
Safe Overload	150% of full scale
HS code	9024900000
ECCN	EAR99

Force Ranges - capacity/resolution

Downloads

Mark-10 Series FS06 Tension and Compression Force Sensors - Data Sheet

Mark-10 Series FS06 Tension and Compression Force Sensors - Instruction Manual