This product has been replaced by the Dakota CMX1-DL
Range: 0.025 - 19.999 inches - 0.60 - 254.0 mm
Dakota Ultrasonics MMX-7 High Performance Data Logging Wall Thickness Gauge Z-160-0003 with Enhanced Data Logging with time based B Scan for a cross section view
Resolution: .001" (0.01 mm)
Datalogging: YES
The Dakota Ultrasonics MX1-DL (MMX-7) High Performance Data Logging Wall Thickness Gauge Z-160-0003 / Z-160-0005is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values.
The Dakota Ultrasonics MX1-DL (MMX-7) High Performance Data Logging Wall Thickness Gauge Z-160-0003 / Z-160-0005 features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use.
Kit Contents
- Dakota Ultrasonics MX1-DL (MMX-7) High Performance Data Logging Wall Thickness Gauge Z-160-0003 / Z-160-0005 With T-102-2700 Probe
- 4 oz. bottle of coupling fluid
- 2 AA batteries
- NIST Traceable Calibration Certificate
- Data Transfer Software
- Serial Output
- Carrying case
- Instruction Manual
Features
- The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
- The MMX-7 also comes complete with our Windows® PC software for transferring data to and from a PC.
- Built in hardware AGC gain control for through paint measurements in multi mode operation.
- The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.
- The MMX-7 has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
- Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
- CE Certified
- Includes NIST-Traceable Calibration Certificate
- Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
- 2 Year Warranty
Specifications
| Range in Steel | Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)
Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.100 - 4.000 inches). Range will vary depending on the thick |
| Resolution | .001 inches (0.01mm) |
| Velocity Range | .0492 to .3936 in./ms
1250 to 9999 meters/sec |
| Units | English & Metric |
| Measurement Modes | - Pulse-Echo (flaws, pits)
- Echo-Echo (thru-paint) |
| Transducer Types | Dual Element (1 to 10 MHz). |
| Memory | 16 megabit non-volatile ram |
| Memory capacity | 12,000 pages with 1 reading and waveform per page |
| Power Source | Three 1.5V alkaline or 1.2V NiCad AA cells |
| Battery Life | Typically operates for 150 hours on alkaline and 100 hours on NiCad |
| Auto Power off | if idle 5 min |
| Display | 1/8 in. VGA grayscale display 62 x 45.7mm |
| Keyboard | Membrane switch with twelve tactile keys |
| Case | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). |
| Operating Temperature | -14° to 140°F (-10° to 60°C) |
| Weight, net | 383 grams |
| Dimensions | 63.5 W x 165 H x 31.5 D mm |
| Warranty | 2 year limited |
| Certification | CE Approved, Factory calibration traceable to national standards |
Related Products
Downloads
F.A.Q.
Do Dakota Ultrasonics Thickness Gauges require any training for use?
No. Dakota Ultrasonics Thickness Gauges are designed for simple operation and feature easy-to-use instruction manuals. We also provide technical support via telephone and/or email, and a 30-day money back guarantee.
Are Dakota Ultrasonics Thickness Gauges calibrated at the factory?
Yes. Dakota Ultrasonics Thickness Gauges arrive fully calibrated and ready to measure.
Do Dakota Ultrasonics Thickness Gauges include Certificate of Calibration?
Yes. Dakota Ultrasonic Thickness Gauges includes NIST-Traceable Calibration Certificate, CE-Certified
Can I measure the thickness of non-metallic materials like plastic and rubber with Dakota Ultrasonics Thickness Gauges?
Yes. Dakota Ultrasonics Thickness Gauges features several preprogrammed sound velocities for common materials.
Can Dakota Ultrasonics Thickness Gauges measure cast/ductile iron or cast aluminum?
Yes. Dakota Ultrasonics Thickness Gauges instruments are designed to accurately measure the wall thickness of carbon steel, aluminum, stainless steel and plastic.
