The NKE AquaLogger Data Logger is a rugged data logger designed for short – medium periods of unmanned monitoring. It features a large 15,000 data set memory, houses a pressure sensor for barometric pressure measurement and it is powered by Lithium batteries. There are 2 versions available, depending on the Aquaprobe you are using.
The NKE AquaLogger Data Logger is a remote logging device designed to be left on-site for medium length deployments. The battery powered unit features a large built in memory and an LED indicator. Every AquaLogger comes complete with LoggerLink PC software and USB data cable so that you can set up your logging regime at your desk.
- NKE AquaLogger Data Logger
- USB Cable for setup and downloading logged data to a PC
- Rugged construction for a solid deployment
- Houses an air pressure sensor for pressure compensation
- Large memory to capture 15,000 full data sets, including calibration data
- Uses lithium batteries to provide battery life of 6-12 months (Dependent upon logging and events set)
- Supplied with the easy to use LoggerLink PC application for logger set up
- Features programmable event triggers to increase logging under certain conditions
- Feature the all metal AquaConn connectors
- Download data via USB into AquaLink
- It couldn’t be easier to set up thanks to the easy to use LoggerLink
- On the left of the screen are the existing settings, currently held by the logger, and on the other side are the new settings options
- Once you have updated the new settings all you have to do is press upload and its ready for deployment! It will even tell you how much logging time you have left, in days, based on the settings you have chosen
| Dimensions (L x Dia) AquaLogger 2000: | 44mm x 250mm
|
| Dimensions (L x Dia) AquaLogger 7000: | 77mm x 250mm
|
| Weight AquaLogger 2000: | 420g
|
| Weight AquaLogger 7000: | 1500g
|
| Data Memory: | 15,000 full sets inc GLP data
|
| Atmospheric Pressure: | 150mb – 1150mb Accuracy +/- 1mb
|
| Interface: | USB (cable provided)
|
| Power Supply AquaLogger 2000: | 2x Lithium C cells
|
| Power Supply AquaLogger 7000: | 6x Lith C cells + 2x AAA cells
|
| Battery Life: | Dependent upon logging rate and temperature
|
| Operating Temperature: | -20ºC to +70ºC
|
| Protection Class: | IP67
|
| Estimated battery life: | same for both
|
| Logging Rate: | Estmated battery life
|
| Every Minute: | 2 Weeks
|
| Every 5 Minutes: | 2.5 Months
|
| Every 10 minutes: | 4 Months
|
| Every 15 Minutes: | 6 Months
|
| Every 30 minutes: | 1 Year
|
| Every Hour: | 2 Years
|
| Please Note: | When cold, alkaline batteries will not perform to their full specification. For this reason, the battery life estimations shown above and in the LoggerLink Software will be significantly shorter (by up to 50%) at lower temperatures
|
| AP-7000 Only: | When the battery voltage becomes low, the cleaning function will be suspended |
