Specifically Designed By Pipe-Flange Inspectors. Measurement Scale: Inch or Metric.
- V-WAC Gauge - Measures porosity, crowns and undercuts/pits to 1 / 4 inch - Inch or Metric
- 7-Piece Fillet Weld Set - Checks the leg and throat for fillet welds. Measurements go from 1 / 8 " 1 inch - Inch or Metric
- HI-LO Welding Gauge - Measures the internal and external misalignment. It can also measure crown heights, pipe wall thickness, fit-up gap and bevel on end preparation. Comes with both Inch and Metric
- Burk Flange Alignment Tool - Checks for proper gasket crushof 150 to 1200 lbs flanges. Side scales check external misalignment of flange. Can only be used on spiral wound gaskets. The Burk Flange Alignment Tool is available in Inch only
- 6 " SPI Scale / Ruler Inch or Metric
- Intrinsic Flashlight - Flashlight is designed to mitigate sparking that could otherwise ignite elements in a hazardous environment
- Inspection Mirror with Magnetic Pick-Up - TWO handy tools in one. 1 " x 2 " Oval Mirror is held firmly in place at all angles. 5 - 5 / 8 " to 20 - 3 / 4 " telescoping reach. Powerful long-life magnet
The Welders, CWI Inspectors, Instructors GAL-12 is a top of the line measuring tools kit. Tools Included: V-WAC / Fillet Weld Comp, 6" General Scale, Telescoping Mirror, Penlite & Single Purpose. The kit measures: 9" X 6 1/2" Open and 6 1/2" X 4 1/4" Wrapped -- Will fit in Pocket.
The G.A.L. Gage Co. Cat # 12Med Welders, CWI Inspectors, Instructors Medium Tool Kit GAL-12Med is comprised of V-WAC Gage, Magnifier, AWS Type Gauge, Hi-Lo Gauge, Micrometer w/ Ball, Telescoping Mirror & 6" SPI Scale.
The G.A.L. Gage Co. Cat # 12AWS American Welding Society (AWS) Inspection Tool Kit GAL-12AWS is comprised of 0-150mm Dial Caliper, 6" Scale w/ Clip, 0-1" Micrometer, 2" Reading Glass, 7 Piece Fillet Weld Set, V-WAC Gauge*& AWS Type Gauge
The G.A.L. Gage Co. Cat # 12 Brief Case Type Large Tool Kit/Lock & Key GAL-12 is comprised of V-WAC Gauge, Fillet Weld, WTPS Gauge, Bridge Cam, Single Purpose, 6" SPI Scale, Telescoping Mirror, Micrometer w/ Ball, Hi-Lo Gauge, Skew-T Fillet Weld w/ Calc, AWS Type Gauge, ADJ Fillet Weld & Magnifier.
