This product has been replaced by the DT-311D AC
The Shimpo DT-311A has been replaced by the Shimpo DT-311D
Shimpo DT-311A AC Powered Digital Stroboscope
Range: 40 - 35,000 RPM/FPM
Power: AC 115 or 230 V
| The Shimpo DT-311A AC Powered Digital Stroboscope is a portable, highly stable and accurate, industrial-quality tools for non-contact RPM measurement, inspection and observation of moving parts by "freezing" or "slowing down" the action. |  |
Features
- Highest accuracy and most stable flash rate
- Easy-to-read LED display
- Easy-to-operate controls
- Detachable pistol-grip handle
- Provides 12 V DC power for external sensors
- Accepts external trigger input and provides synchronizing pulse output
- Phase shift for best view and flash photography
- Flash rate control
- Instant double and half-rate flash selection for error-free reading
Specifications
| Flash Range | 40-35,000 FPM |
| Accuracy | Internal Mode: ±0.01% of reading
External Mode: ±0.01% or ± 1 digit |
| Drift | ±0.01% per degree C |
| Update Time | Internal Mode: 0.2 seconds
External Mode: ±0.01% or ± 1 digit |
| Input Signal | LO level: 0-0.4 VDC
HI level: 2.5 - 12 VDC -- or open collector (npn)
pulse width 50us min |
| Output Signal | Synchronous, 400 µs pulse, 0 to approx. ± 12 V DC 1000 ohms impedance |
| Display & Rate | Divide or multiply by 2, selectable |
| Operating Temp | 32-104° (0-40°C) |
| Display | 5 digits, 10 mm high, red LED |
| Flashtube | Xenon, 10 W maximum |
| Flash Duration | 10-30 µs |
Sensor Power
Supply | 12 VDC ± 0.5V (50ma) |
| Power Requirements | 115 V AC or 230 V AC Adapter or one (1) hour, internal,
rechargeable 12 V battery or external 12 V DC |
| Phase Shift | 0 - 359° with 1° resolution or 0 - 333 ms from 200 - 3,000 FPM |
| Input Impedance | 10,000 ohms |
| Battery Life | 3 hours at high flash rate |
| Full Charge Time | 16 hours |
| Weight | 4.4 lbs. (2 kg) |
| Dimensions | 4.7 x 4.7 x7.2" (120 x 120 x 183mm) |
Downloads
