Imada Cedar DID Digital Torque Screwdriver
35 lbf-in & 4.5 lbf-in Capacities
Units of measure: lb-in, oz-in, kg-cm, N-cm and N-m
The Imada Cedar DID Digital Torque Screwdriver is a torque measuring manual screw driver designed for lab and production use. The large LCD display measures bi-directional torque in real-time or peak modes. USB data output allows the user to graph torque vs time with optional SW-1SD software.
| The Imada Cedar DID Digital Torque Screwdriver has an accuracy of ± 0.5% F.S., ±1 LSD and has programmable setpoints that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Built-in ratcheting clutch allows for convenient tightening or loosening. Use the 800 internal memory for data recall or USB download for SPC. | | The DID substantially reduces scrap and rework costs by eliminating over and undertightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies. | Kit Contents
- Imada Cedar DID-4 Digital Torque Screwdriver
- Certificate NIST Traceable Calibration Certificate
- 1/4" Female Hex Adapter
- Two (2) 1/4" Phillips tips
- Universal (100-240V) AC Adapter / Charger
- Operating Instructions
- Imada Cedar DID-05 Digital Torque Screwdriver
- Certificate NIST Traceable Calibration Certificate
- Phillips and Flat bits
- Universal (100-240V) AC Adapter / Charger
- Operating Instructions
Features
- Includes 3-Point Certificate NIST Traceable Calibration Certificate, ISO-17025 Cert Optional
- Peak, Real Time and Peak Down measuring mode (selectable)
- Statistics: number of data, Max, Min, Avg
- Programmable screw tightening counter
- DID-4 uses standard 1/4" bits, DID-05 uses 4mm ROUND or Half ROUND bits.
- Selectable units ozf-in, lbf-in, kgf-cm, N-cm and N-m
- Runs on internal NiCad batteries (8 hour use) Auto shut-off after 10 min. of non-use
- Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
- USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
- 800 data memory for recall or for SPC download
- Programmable Auto Zero function resets unit to zero for easy operation
- 2 Phillips tips, AC charger included
- 2-Year Warranty
- DID-05 features a built-in 1 way clutch
Specifications
| Accuracy | +/- 0.5% F.S., +/- 1 LSD |
| Display | 4 digit LCD |
| Operation | CW, CCW and fixed position (DID-4 Only) |
| Measuring Modes |
| PP | Peak Mode displays PEAK torque value that will not change until a higher value is measured |
| PD | Peak Down Mode Captures first peak down value above the PDLO |
| Real Time | Displays transient torque values |
| C | Real-time Output 180 data per second |
| GO/NO GO testing | Programmable High and Low setpoints with both audible beep and Green/Red LED indicator |
| Statistics | Number of data, maximum, minimum and average |
| Data Transfer | ASCII, 19200 bps, USB miniB cable |
| Data Memory | 800 data |
| Batch Counter | 1-99 (CW only) |
| Power Supply | Ni-Cad rechargeable batteries 1.2V×4cells 600mAh |
| Auto Power Save | Automatic switch off after 10 minutes of non-use |
| Charging Time | From empty - less than 5hours |
| Working Time | 12 hours continuous use |
| Accessories | AC/DC Adapter/Charger, 100~230VAC, 2 Phillips bits, NIST certificate |
| Warranty | 1 Year |
Ranges
| Model | Capacity | Resolution |
| DID-05 | 69.50 in-oz | 0.01 in-oz |
| 4.500 in-lb | 0.001 in-lb |
| 5.000 kg-cm | 0.001 Kg-cm |
| 50.00 N-cm | 0.01 N-cm |
| DID-4A | 560.0 in-oz | 0.1 in-oz |
| 35.00 in-lb | 0.01 in-lb |
| 40.00 kg-cm | 0.01 Kg-cm |
| 400.0 N-cm | 0.1 N-cm |
| 4.000 N-m | 0.001 N-m |
Related Products
Downloads
