Measuring Range: 0 - 10 mm (0 - 0.400") option 25MM: 0 - 25 mm (0 - 1.000")
Resolution: 0.01 mm (0.001")
Offered in either 300 mm (12") or 500 mm (20") Jaw Depth for measurement of wide samples
Measures material thickness of non-woven fabrics, textiles, felts, geomaterials, paper, floor coverings, leather, foils, etc.
300 Series for 300mm Jaw Depth (12")
500 Series for 500mm Jaw Depth (20")
Measuring Range: 0 - 10 mm (0 - 0.400") or 0 - 25 mm (0 - 1.000")
Resolution: 0.01 mm (0.001")
The MTT-10 Digital Textile / Leather Thickness Gauge is a digital dial thickness gauge designed for the accurate thickness measurement of non-woven fabrics, textiles, felts, geomaterials, paper, floor coverings, leather, foils, etc. It is offered with two different jaw depths providing clearance to measure wide samples. The combination of feeler diameter and load weight generates a specific pressure as required by many standardized test standards necessary in order to get reliable and repeatable measurements such as fabric, felt, textiles, and similar compressible materials.
The feeler shape and the pressure are corresponding to DIN EN ISO standards, however, this low-cost thickness gauge is suitable for quick comparison measurements and does not strictly conform to the standard.
Features
- Swing-out foot for on-table operation
- Digital display with selectable units inch or mm
- Measuring feeler 20 cm²
- Zero setting by pushing a button
Specifications
| Measuring Range | 0 - 10 mm (standard) or 0 - 25 mm (optional) |
| Resolution | 0.01 mm |
| Accuracy | ± 0.02 mm |
| Depth of Jaws | 300 mm (300 Series)
500 mm (500 Series) |
| Display | LCD 4 Digit, 8 mm tall |
| Pressure | Refer to table below (gauge, feeler, weight) |
| Feeler shape | 50.5 mm Ø = 20 cm²
56.42 mm Ø = 25 cm² |
Available Models
Downloads
