Phone: 888 275 5772 281 516 9292 eFax: 866 234 0451 Free Shipping on orders over $150
TI-25M-MMX Through Paint Ultrasonic Thickness Gauge

TI-25M-MMX Through Paint Ultrasonic Thickness Gauge

Description
Price: $ 1,695.00
Measures on coated materials and eliminates the coating from the measurement

Range: Pulse-Echo Mode (Pit & Flaw Detection) 0.025 - 19.99 inches 0.63 - 500 mm - Echo-Echo Mode (Through Paint & Coatings) 0.1 - 1 inch 2.54 - 25.4 mm


Resolution: 0.001" (0.01 mm)

Datalogging: NO

Measuring Range in Steel

Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).

Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters).

The TI-25M-MMX Through Paint Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!

TI-25M-MMX Through Paint Ultrasonic Thickness Gauges can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The TI-25M-MMX Through Paint Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

line
Photo Gallery
line

ABQ ABQ ABQ ABQ

line
Features
line

  • Ability to measure through paint and eliminate coatings
  • Resolution of 0.001 inch (0.01 mm)
  • Large, backlit LCD display retains last reading
  • Simple operator controls virtually eliminate training
  • Special-purpose probes are offered for a variety of applications
  • Switch-selected units for inches or mm
  • For underwater surveying, probe cable lengths up to 50 feet are optionally
  • CE Certified
  • Includes NIST Calibration Certificate

lineTypical Applicationsline

typical

lineMeasuring Limitsline

Minimum Radius for Convex Surfaces 0.350" (8.89 mm)
Minimum Radius for Concave Surfaces 3" (76.2 mm)
Minimum Headroom 1" (25.0 mm)
Minimum Sample Diameter 0.150" (3.8 mm)
Minimum Substrate Thickness - F na
Minimum Substrate Thickness - NFe na


lineSpecificationsline

Range Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters).
Resolution .001" (0.01 mm)
Display 4½ - Digit, 0.5" Backlit LCD
Velocity Range 0.0492 to .3937 in./µs. (1250 to 10,000 meters/second)
Probe 5 MHz, 0.25" Diameter (6.35 mm)
Probe Wearface PEEK (Polyethlethylketone)
Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).
Temp. Limits Ambient: -20 to 120° F (-30 to 50° C)
Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available
Battery Type Two AA batteries
Battery Life 200 hours
Weight 7 ounces (196 g)
Size 2.5 x 4.5 x 1.25"
(64 x 114 x 32 mm)
Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty Gauge: 5 Years
Probes: 90 Days


lineModel Selection Guideline

Selection Guide - Pit & Flaw Detection (Pulse-Echo) Mode

Model Number Maximum Coating Minimum Wall Maximum Wall
All Models 0.020" (0.50mm) 0.100" (2.54mm) 6.000" (152.4mm)

Selection Guide - Thru-Paint (Echo-Echo) Model

Model Number Maximum Coating Minimum Wall Maximum Wall
TI-25M-MMX 0.040" (1.00mm) 0.100" (2.54mm) 1.000" (25.4mm)
TI-25M-MMX-EXT 0.080" (2.00mm) 0.200" (5.08mm) 5.000" (127.0mm)


lineComplete Kitline

The TI-25M-MMX Through Paint Ultrasonic Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

lineOptional Accessoriesline

NIST-Traceable Steel Test Block
3 Sizes Available

  • Precision Machined and Finished
  • Includes NIST Report and Test Data

line

Uncertified Steel Test Block
For Ultrasonic Gauges
  • For convenient confirmation of thickness gauge calibration

line

TICC-M
Protective Holder for Ultrasonic Gauges

  • Constructed from heavy duty Cordura Nylon
  • Built-in belt loop

line

CF12
Coupling Fluid

  • Used to create an ultrasonic coupling between the probe and material to be measured
  • 12 oz Bottle

line

V-Block
Transducer Holder

  • The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas

lineDownloadsline

TI-25M-MMX Through Paint Ultrasonic Thickness Gauge - Certificate
TI-25M-MMX Through Paint Ultrasonic Thickness Gauge - Data Sheet
TI-25M-MMX Through Paint Ultrasonic Thickness Gauge - Instruction Manual

lineBuy Nowline


Check the items you would like to purchase then click "Add To Cart"
Item Price
$1,695.00
$1,695.00
Accessories PRICE
$55.00
$30.00
$175.00
$330.00
$340.00
$370.00
$380.00
$445.00
$65.00