Phone: 888 275 5772 281 516 9292 eFax: 866 234 0451 Free Shipping on orders over $150
TI-25LT Ultrasonic Thickness Gauge for Steel

TI-25LT Ultrasonic Thickness Gauge for Steel

Description
Price: $ 845.00
Ultrasonic Wall Thickness Gauge for measuring CARBON STEEL ONLY

Range: 0.040 - 6.00 inches - 1.00 - 150.00 mm


Resolution: 0.004" (0.01mm)

Datalogging: NO

Measuring Range in Steel
0.040 - 6.00 inches
1.00 - 150.0 mm

The TI-25LT Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion - from only one side!

Standard configuration: In its standard configuration, the TI-25LT Wall Thickness Gauge is factory set to MEASURE STEEL ONLY

Optional configuration: As a “no cost” option, the TI-25LT Wall Thickness Gauge can be factory set to measure on stainless steel.

Easy upgrade to full TI-25M Ultrasonic Thickness Gauge functionality (refer to separate data sheet). TI-25M Ultrasonic Thickness Gauges measure on all metals, ceramics, glass and most rigid plastics. It provides Single Reading and Scan modes, where the probe is dragged over a large measuring area. The minimum reading recorded during the "scan" is displayed.

Upgrade to TI-25M Ultrasonic Thickness Gauges require factory installation of enhanced circuit board, new firmware andkeypad.

line
Photo Gallery
line

ABQ ABQ ABQ ABQ

line
Features
line

  • Resolution of 0.004 inch (0.01 mm)
  • Large, backlit LCD display retains last reading
  • Simple operator controls virtually eliminate training
  • Special-purpose probes are offered for a variety of applications
  • The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions
  • Switch-selected units for inches or mm
  • For underwater surveying, probe cable lengths up to 50 feet are optionally
  • The TI-25LT Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water
  • CE Certified
  • Includes NIST Calibration Certificate

lineTypical Applicationsline

typical

lineMeasuring Limitsline

Minimum Radius for Convex Surfaces 0.350" (8.89 mm)
Minimum Radius for Concave Surfaces 3" (76.2 mm)
Minimum Headroom 1" (25.0 mm)
Minimum Sample Diameter 0.150" (3.8 mm)
Minimum Substrate Thickness - F na
Minimum Substrate Thickness - NFe na


lineSpecificationsline

Range in Steel 0.040-6.00" (1.00-150.0 mm)
Resolution .004" (0.01mm)
Display 4½ - Digit, 0.5" Backlit LCD
Velocity Range .0787-.3937 in/µs
(2000-10,000 m/sec)
Probe 1/4", 5 MHz, actual wearface is 5/8" (17mm)
Probe Wearface PEEK (Polyethylethylkytone)
Cable 4ft. (1.2m) waterproof cable with non-polarized, quick-disconnect connectors. Op
Temp. Limits Ambient: -20 to 120° F (-30 to 50° C)
Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available
Battery Type Two AA batteries
Battery Life 200 hours
Weight 710 ounces (280g)
Dimensions 2.5 x 4..5 x 1.25"
(64 x 114 x 32mm)
Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty Gauge: 5 Years
Probes: 90 Days


lineComplete Kitline

Complete Kit includes: Gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carryingcase

lineOptional Accessoriesline

NIST-Traceable Steel Test Block
3 Sizes Available

  • Precision Machined and Finished
  • Includes NIST Report and Test Data

line

Uncertified Steel Test Block
For Ultrasonic Gauges
  • For convenient confirmation of thickness gauge calibration

line

TICC-M
Protective Holder for Ultrasonic Gauge
s

  • Constructed from heavy duty Cordura Nylon
  • Built-in belt loop

line

CF12
Coupling Fluid

  • Used to create an ultrasonic coupling between the probe and material to be measured
  • 12 oz Bottle

line

V-Block
Transducer Holder

  • The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas

lineDownloadsline

TI-25LT Ultrasonic Thickness Gauge for Steel - Certificate
TI-25LT Ultrasonic Thickness Gauge for Steel - Data Sheet
TI-25LT Ultrasonic Thickness Gauge for Steel - Instruction Manual

lineBuy Nowline


Check the items you would like to purchase then click "Add To Cart"
Item Price
$845.00
$845.00
Accessories PRICE
$55.00
$30.00
$175.00
$125.00
$285.00